복합재 구조물의 저속 충격 손상 및 충격 후 압축 강도 해석
Analysis of Low Velocity Impact Damage and Compressive Strength After Impact for Laminated Composites
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
최근 항공기의 성능향상 및 경량화 등의 필요에 의해 많은 항공기 특히 소형항공기 구조물에 있어 복합재료의 사용이 증가되고 있다. 그러나 복합재료의 복잡한 기계적 거동 특성 및 파손양상 등으로 인하여 그 사용에는 많은 제한이 따르고 있는 실정이다. 복합재에 발생하는 저속충격은 외관상 드러나지는 않기 때문에 복합재 구조물을 설계하는 데 있어 매우 중요하며, 특히 충격 후 충격손상으로 야기되는 층간 분리등은 구조물의 압축강도를 현저하게 저하시킬 수 있다. 본 연구에서는 적층복합재 구조물의 저속충격에 의한 손상거동 및 충격 후 잔류압축강도를 수치적으로 예측하였다. 예측 된 충격하중 이력곡선과 충격 후의 압축 강도를 시험결과와 비교하였고 잘 일치함을 확인 할 수 있었다.
Abstract
The demand for weight saving and high performance of aircraft require the more uses of composite materials. However the complicate behaviors and various failure characteristics restrict usage of composite materials. Low-velocity impact damage is a major concern in the design of structures made of composite materials, because impact damage is hidden and cannot be detected by visual inspection. Especially, the reduction on compressive strength after impact is influenced by the ply delaminations introduced as damage by impact event. In this research, the numerical analysis was performed to investigate impact damage and compressive strength after impact. It was found that impact force history and compressive strength after impact calculated by the numerical analysis were compared and shown a good agreement with experimental results.
참고문헌 (13)
- Comparative Evaluation of Failure Analysis Methods for Composite Laminates, "Sun, C. T.", ~, pp.DOT (1996), FAA[DOI]
- Tsai, S. W., "A General Theory of Strength for Composite Anisotropic Materials", Journal of Composite Materials, 5, pp.58~80 (1971)
- Hashin, Z., "A Fatigue Critetion of Fiber Reinforced Materials", Journal of Composite Materials, 7, pp.448~464 (1973)
- Hashin, Z., "Failure Criteria for Unidirectional Fiber Composites", Journal of Applied Mechanics, 47, pp.329~334 (1980)
- Yamada, S. E., "Analysis of Laminate Strength and Its Distribution", Journal of Composite Materials, 12, pp.275~284 (1978)
- Chang, Fu-Kuo, "Failure of Composite Laminates Containing Pin Loaded Holes-Method of Solution", Journal of Composite Materials, 18, pp.255~278 (1984)
- Chang, Fu-Kuo, "Failure Strength of Nonlinearly Elastic Composite Laminates Containing Pin-Loaded Holes-Method of Solution", Journal of Composite Materials, 18, pp.464~477 (1984)
- Chang, Fu-Kuo, "A Progressive Damage Model for Laminated Composites Containing Stress Concentrations", Journal of Composite Materials, 21, pp.834~855 (1987)
- Shahid, Iqbal, "Failure and Strength of Laminated Composite Plates Under Multiple In-Plane Loads", 38th Int. SAMPE Symp, pp.967~977 (1993)
- Shahid, Iqbal, "An Accumulative Damage Model for Tensile and Shear Failures of Laminated Composite Plates", Journal of Composite Materials, 29(7), pp.926~981 (1995)
- Hart-Smith, L. J., "A New Approach to Fibrous Composite Laminate Strength Prediction", Eighth DOD, FAA Conference on Fibrous Composites in Structural Design, pp.1989[DOI]
- Choi, H. Y., "A Model for Predicting Damage in Graphite", Epoxy Laminated Composites Resulting from Low-velocity Point Impact, 1992, pp.26(14), 2134~2169
- "Genoa User Manual, Ver. 4.3.1", ~