본문 바로가기
KERD
논문KCI 등재

Mechanical Properties of Corn Husk Flour/PP Bio-composites

송정일|Dani. Jagadeesh|P. Sudhakara|D.W. Lee|H.S. Kim|B.S. Kim
한국복합재료학회 (The Korean Society For Composite Materials)|2013.09|Composites Research|제26권 제4호|pp. 213-217

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

particle sizemechanical propertiesagro-waste fillersbio compositesbiodegradable polymer
주제분류재료공학

초록

The focus in the present work is to study the agro-waste corn husk bio-filler as reinforcement for polypropylene. These materials have been created by extrusion and injection molding. The effect of filler content by 10, 20, 30 and 40 wt. % and mesh sizes of 50~100, 100 and 300 on the mechanical properties was studied. For the un-notched specimens, the results of flexural strength showed a declining trend with increase the filler loading and the results of impact strength showed an increasing trend with increase the mesh size. In contrast, enhanced flexural modulus was observed with increasing filler loading and size.

Abstract

The focus in the present work is to study the agro-waste corn husk bio-filler as reinforcement for polypropylene. These materials have been created by extrusion and injection molding. The effect of filler content by 10, 20, 30 and 40 wt. % and mesh sizes of 50~100, 100 and 300 on the mechanical properties was studied. For the un-notched specimens, the results of flexural strength showed a declining trend with increase the filler loading and the results of impact strength showed an increasing trend with increase the mesh size. In contrast, enhanced flexural modulus was observed with increasing filler loading and size.

참고문헌 (28)

  1. Nourbakhsh, A., "Wood Plastic Composites from Agro-waste Materials: Analysis of Mechanical Properties", Bioresource Technology, 101, pp.2525~2528 (2010)
  2. Kim, H. S., "Biodegradability and mechanical properties of Agro-Flour-filled polybutylene succinate biocomposites", JOURNAL OF APPLIED POLYMER SCIENCE, 97, pp.1513~1521 (2005), JOHN WILEY & SONS INC
  3. Peng, F., "Bioconversion of Sugarcane Biomass into Ethanol : An Overview about Composition, Pretreatment Methods, Detoxification of Hydrolysates, Enzymatic Saccharification, and Ethanol Fermentation", Biomass and Bioenergy, 39, pp.20~32 (2012)
  4. Kim, H. S., "Colorless Polyimide Nanocomposite Films: Thermomechanical Properties, Morphology, and Optical Transparency", Journal of Applied Polymer Science, 107, pp.109~117 (2008)
  5. Gahleitner, M., "Morphology and Mechanical Properties of Polypropylene", polyamide 6 Nanocomposites Prepared by a Two-step Melt-compounding Process, 2006, pp.100, 283~291
  6. Najafi, S. K., "Mechanical Properties of Composites from Sawdust and Recycled Plastics", Journal of Applied Polymer Science, 100, pp.3641~3645 (2006)
  7. Moran, J., "Mechanical Properties of Polypropylene Composites Based on Natural Fibers Subjected to Multiple Extrusion Cycles", Journal of Applied Polymer Science, 103, pp.228~237 (2007)
  8. Mutje, P., "Effect of Maleated Polypropylene as Coupling Agent for Polypropylene Composites Reinforced with Hemp Strands", Journal of Applied Polymer Science, 102, pp.833~840 (2006)
  9. Leblanc, J. L., "Investigating Polypropylene-Green Coconut Fiber Composites in the Molten and Solid States Through Various Techniques", Journal of Applied Polymer Science, 102, pp.1922~1936 (2006)
  10. Yi, W. W., "Preparation and Properties of Polypropylene Filled with Organo-montmorillonite Nanocomposites", Journal of Applied Polymer Science, 100, pp.2875~2880 (2006)
  11. Genevive C. Onuegbu, "The Effects of Filler Contents and Particle Sizes on the Mechanical and End-Use Properties of Snail Shell Powder Filled Polypropylene", Materials Sciences and Application, 2, pp.811~817 (2011)
  12. Aithani D, "Injection Molded Novel Green Materials from the Byproduct of Corn-based Ethanol Industry", A Society of Plas Engin Boston, pp.6147~6152 (2005)
  13. "USDA National Agricultural Statistics Service"[URL]
  14. Marques, A. P., "The Biocompatibility of Novel Starch-based Polymers and Composites : in vitro Studies", Biomaterials, 23, pp.1471~1478 (2002)
  15. Beery, K. E., "A 19F Nuclear Magnetic Relaxation Study of Micelle Formation in Aqueous Solutions of Heptafluorobutyric Acid and Sodium Pentadecafluorooctanoate", American Chemical Society, 46, pp.212~219 (2000)
  16. Mohd, Z., "Mechanical Properties of Short Random Oil Palm Fibre Reinforced Epoxy composites", Sains Malaysiana, 39, pp.87~92 (2010)
  17. Kord, B., "Crystallization Behavior of Natural Fiber- Reinforced Plastic Nanocomposite", Science Applied Journal, 13, pp.1329~1332 (2011)
  18. Jilken, L., "The Effect of Mineral Fillers on Impact and Tensile Properties of Polypropylene", Polymer Testing, 10, pp.329~344 (1991)
  19. Fuad, M. Y. A., "Application of Rice Husk Ash as Fillers in Polypropylene : Effect of Titanate, Zirconate and Silane Coupling Agents", European Polymer Journal, 31, pp.885~893 (1995)
  20. Kim, H. S., "Biodegradability and mechanical properties of Agro-Flour-filled polybutylene succinate biocomposites", JOURNAL OF APPLIED POLYMER SCIENCE, 97, pp.1513~1521 (2005), JOHN WILEY & SONS INC
  21. Yang, H. S., "Water absorption behavior and mechanical properties of lignocellulosic filler-polyolefin bio-composites", COMPOSITE STRUCTURES, 72, pp.429~437 (2006), ELSEVIER SCI LTD
  22. Kendall, K., "Fracture of Particulate Filled Polymers", British Polymer, 10, pp.35~38 (1977)
  23. Raj, R. G., "Use of Wood Fibers in Thermoplastics. VII. The Effect of Coupling Agents in Polyethylene-wood Fiber Composites", Journal of Applied Polymer Science, 37, pp.1089~1103 (1989)
  24. Zhaini, M. J., "The Effect of Filler Content and Size on the Mechanical Properties of Polypropylene", oil Palm Wood Flour Composites, 1995, pp.40, 51~55
  25. Bigg, D. M., "Mechanical Properties of Particulate Filled Polymers", Polymer Composites, 8, pp.115~122 (1987)
  26. Fuad, M. Y. A., "Effect of Titanate, Zirconate and Silane Coupling Agent", European Polymer Journal, 31, pp.885~892 (1995)
  27. Fan, Y., "Microstructure Dependent Properties of Polypropylene-clay Nanocomposites", Journal of Applied Polymer Science, 103, pp.204~210 (2007)
  28. Maiti, S. N., "Influence of Wood Flour on the Mechanical Properties of Polyethylene", Journal of Applied Polymer Science, 32, pp.4285~4289 (1985)

관련 논문AI추천

Manufacturing and Mechanical Properties of Sisal Fiber Reinforced Hybrid Composites김병선, 송정일, P. Sudhakara, Yi Qi Wang, Zhi-peng Hui한국복합재료학회 · Composites Research2013 · 제26권 제5호Effect of Coffee Grounds on Mechanical Behavior of Poly Propylene Composites송정일, 이동우, 비니스타 찬타봉, M.N. Prabhakar한국복합재료학회 · Composites Research2023 · 제36권 제4호Mechanical and Hygroscopic Behaviour of Teak Wood Sawdust Filled Recycled Polypropylene CompositesAnil Kumar Yadav, Rajeev Srivastava한국복합재료학회 · Composites Research2018 · 제31권 제5호Thermal and Mechanical Properties of Waste Ground Nut-shell Reinforced Polyester Composites송정일, Atta ur Rehman Shah, M.N. Prabhakar한국복합재료학회 · Composites Research2015 · 제28권 제3호Development and Characterization of Oyster Shell Powder Filled Polypropylene Composite김병선, 송정일, 이동우, Atta ur Rehman Shah, M.N. Prabhakar한국복합재료학회 · Composites Research2014 · 제27권 제5호Studies on Borassus fruit fiber and its composites with Polypropylene배성인, 송정일, B.S. Kim, C. Venkata Prasad, Dani. Jagadeesh, H.S. Kim, K. Obi Reddy, P. Sudhakara한국복합재료학회 · Composites Research2013 · 제26권 제1호

이 간행물의 다른 논문 (9건)

SQP법을 사용한 복합재 조류력 발전용 블레이드의 스파 캡에 대한 두께 최적화박천진, 이인, 정민수, 차명찬, 유승재, 김상우pp. 207-212슬래그 입자의 크기 및 체적비에 따른 슬래그 입자강화 복합재료의 기계적 특성 연구남지훈, 전흥재, 홍익표pp. 218-222내충격성 향상 및 경량화를 위한 하이브리드 복합재료 스트럿 타워 설계김성수, 이현철, 오현주pp. 223-229연속 유리섬유 강화 폴리유산 복합재료의 제조 및 물성노정우, 이우일pp. 230-234다수의 임의로 경사진 등방성 타원형 장섬유를 포함하는 복합재료에서의 응력 해석오상민, 이정기pp. 235-244
원문 보기