탄소섬유 강화 PA6/PPO 복합재료의 섬유 배향에 따른 충격강도 및 열팽창 거동에 관한 연구
A Study on the Effect of Fiber Orientation on Impact Strength and Thermal Expansion Behavior of Carbon Fiber Reinforced PA6/PPO Composites
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
사출 성형을 통해 제조된 단섬유 강화 복합재는 사출 성형 중 발생하는 수지 유동으로 인해 동일 시편 내에서도 다양한 섬유 배향을 갖는다. 이러한 섬유의 배향은 최종 복합재의 기계적, 열적 특성에 많은 영향을 주므로, 본 연구에서는 사출 성형된 탄소단섬유 강화 PA6/PPO 복합재의 섬유 배향을 광학 현미경 분석을 통하여 측정하고 섬유의 배향이 복합재의 충격강도 및 열팽창 계수에 미치는 영향을 분석하였다. 충격강도의 경우에 섬유의 배향이 크랙이 전파되는 방향에 수직으로 배향되어 있을수록 더 높은 충격강도를 보였으며, 이는 섬유의 배향에 따른 충격내성 강화 메커니즘과 밀접한 연관성을 보여주었다. 열팽창 계수의 경우에는 섬유가 열팽창률을 측정하는 방향과 동일한 방향으로 배향되어 있을수록 더 낮은 열팽창계수를 보였으며, 이 결과 역시 섬유의 배향이 열팽창 특성에 미치는 메커니즘과 밀접한 연관성을 보였다.
Abstract
Short fiber reinforced composites manufactured by injection molding have diverse fiber orientations variable with measuring positions even in the same specimen, which is caused by the flow induced fiber orientation. Fiber orientations considerably affect the mechanical and thermal properties of final composite products. In this study,fiber orientation of injection molded carbon fiber reinforced PA6/PPO composite was measured at several points of the specimen by optical microscopy analysis and the corresponding izod impact strength, coefficients of thermal expansion (CTE) were also measured to investigate the influence of local fiber orientation on the mechanical and thermal properties. Izod impact strength where fiber was perpendicular to the direction of crack propagation was higher than where fiber was parallel to the direction, which could be explained be the impact resistance reinforcing mechanism by fiber orientation. CTE was also lower where fiber was parallel to the measurement direction of CTE than where fiber was perpendicular to the direction, which could be also explained by the dimensional stability mechanism by fiber orientation.
참고문헌 (21)
- Karsli, N.G, "Tensile and ThermomechanicalProperties of Short Carbon Fiber Reinforced Polyamide6 Composites", Composites Part B: Engineering, 51, pp.270~275 (2013)
- Xu, Y, "Mechanical Properties of Carbon FiberReinforced Epoxy", Clay Nanocomposites, 2008, pp.68, 854~861
- Van den Oever, M, "Continuous-Glass-Fibre-Reinforced Polypropylene Composites II. Influence of MaleicAnhydride Modified Polypropylene on Fatigue Behaviour", Composites Part A: Applied Science and Manufacturing, 29(3), pp.227~239 (1998)
- Boli, Y, "Effect of PPO-g-MAon Structures and Properties of PPO", PA6, Journal of Polymer Science Part B: Polymer Physics, pp.2009, 47[DOI]
- Hassan, A, "Tensile,Impact and Fiber Length Properties of Injection-MoldedShort and Long Glass Fiber-Reinforced Polyamide 6,6 Composites", Journal of Reinforced Plastics and Composites, 23(9), pp.969~986 (2004)
- Tjong, S.C, "Impact Fracture Toughnessof Short Glass Fiber-Reinforced Polyamide6,6 HybridComposites Containing Elastomer Particles Using EssentialWork of Fracture Concept", Materials Science and Engineering, A347, pp.338~345 (2003)
- Rezaei, F, "Developmentof Short-Carbon-Fiber-Reinforced PolypropyleneComposite for Car Bonnet", Polymer-Plastics Technology andEngineering, 47, pp.351~357 (2008)
- Mlekusch, B, "Thermoelastic Properties of Short-Fibre-ReinforcedThermoplastics", Composites Science and Technology, 59, pp.911~923 (1999)
- Kim, J.W, "Measurement of Fiber OrientationAngle in FRP by Intensity Method", Journal of Materials ProcessingTechnology, 201, pp.755~760 (2008)
- Gregorio, M, "Unambiguous Orientation in ShorShort Fiber Composites over Small Sampling Area in a Center-Gated Disk", Composites Part A: Applied Science and Manufacturing, 43, pp.104~113 (2012)
- Blanc, R, "FiberOrientation Measurements in Composite Materials", CompositesPart A: Applied Science and Manufacturing, 37, pp.197~206 (2006)
- Eberhardt, C, "Fibre-Orientation Measurementsin Short- Glass- Fibre Composites. Patr I: Automated,High-Angular-Resolution Measurement by Confocal Microscopy", Composites Science and Technology, 61, pp.1389~1400 (2001)
- Eberhardt, C, "Fibre-Orientation Measurements in Short-Glass-FibreComposites II: a Quantitative Error Estimate of the 2D ImageAnalysis", Composites Science and Technology, 61, pp.1961~1974 (2001)
- Fu, S.-Y, "Effects of fiber Length and Fiber OrientationDistributions on the Tensile Strength of Short-Fiber-Reinforced Polymers", Composites Science and Technology, 56, pp.1179~1190 (1996)
- Tezvergil, A, "The Effectof Fiber Orientation on the Thermal Expansion Coefficients ofFiber-Reinforced Composites", Dental Materials, 19, pp.471~477 (2003)
- Berrasconi, A, "Effect ofFibre Orientation on the Fatigue Behaviour of a Short GlassFibre Reinforced Polyamide-6", International Journal of Fatigue, 29, pp.199~208 (2007)
- Yun, S, "The Elastic Modulus of MisalignedShort-Fiber-Reinforced Polymers", Composites Science andTechnology, 58, pp.389~400 (1998)
- Rasheva, Z, "A CollelationBetween the Tribological and Mechanical Properties of ShortCarbon Fibers Reinforced PEEK Materials With Different FiberOrientations", Tribology International, 43, pp.1430~1437 (2010)
- Tungjitpornkull, S, "Processing Techniqueand Fiber Orientation Angle affecting the MechanicalProperties of E-Glass Fiber Reinforced Wood", PVC Composites, 2009, pp.209, 3079~3088
- Lusti, H.R, "Direct NumericalPredictions for the Elastic and Thermoelastic Properties ofShort Fibre Composites", Composites Science and Technology, 62, pp.1927~1934 (2002)
- Won, H. J, "A Study on the Effects of Interfacial Property andFiber Orientation on Impact Strength and Thermal ExpansionBehavior of Pitch Carbon Fiber Reinforced PA6", PPO Composites, University of Science and Technology, 2014