SiCf-SiC 복합재료의 내환경 코팅 및 열, 기계적 내구성 평가
Thermal and Mechanical Evaluation of Environmental Barrier Coatings for SiCf-SiC Composites
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
본 논문에서는 탄화규소 섬유강화 탄화규소 복합재료에 내환경 코팅을 수행한 후, 열∙기계적 특성평가에대한 연구를 수행하였다. 초기분말은 성형공정도중 흐름성을 좋게 하기 위해 분무건조법으로 구형의 분말을 제조하였다. 내환경 코팅재는 복합재료가 산화되거나 고온 수증기와 반응하는 것을 방지하기 위해 행하여 지는데, 본연구에서는 액상침투법(LSI)으로 제조한 복합재에 실리콘으로 본드코팅을 하고 그 위에 대기플라즈마용사법으로뮬라이트(mullite)와 무게비로 12% 이터븀 실리케이트(ytterbium silicate)가 혼합된 복합재를 코팅하였다. 대기플라즈마 코팅공정 시 성형변수로서 분무거리를 100, 120 그리고 140 mm로 변화시켰다. 그 후 1100oC의 온도에서100시간동안 유지하는 실험과 1200oC의 온도에서 열충격을 가하는 싸이클을 3000회 반복하였다. 열내구성 시험동안 계면 박리는 일어나지 않았지만, 현저한 균열들이 코팅층 내에서 발견되었다. 균열밀도와 균열의 길이는 코팅도중의 분무거리에 의존하여 변화하였다. 열 내구성 시험 후, 압흔 시험을 통해 기계적 열화거동을 분석하였는데, 시험의 방식이나 조건들이 하중-변위 곡선의 거동에 영향을 주었다.
Abstract
This study investigates thermal and mechanical characterization of environmental barrier coating on the SiCf-SiC composites. The spherical environmental barrier coating (EBC) powders are prepared using a spray drying process for flowing easily during coating process. The powders consisting of mullite and 12 wt% of Ytterbium silicate are air plasma sprayed on the Si bondcoat on the LSI SiC fiber reinforced SiC composite substrate for protecting the composites from oxidation and water vapor reaction. We vary the process parameter of spray distance during air plasma spray of powders, 100, 120 and 140 mm. After that, we performed the thermal durability tests by thermal annealing test at 1100oC for 100hr and thermal shock test from 1200oC for 3000 cycles. As a result, the interface delamination of EBC never occur during thermal durability tests while stable cracks are prominent on the coating layer. The crack density and crack length depend on the spray distance during coating. The post indentation test indicates thermal tests influence on the indentation load-displacement mechanical behavior.
참고문헌 (29)
- Bansal, P. N., "Handbook of Ceramic Composites" (2006), Springer Science & Business Media
- Kowbela, W., "High Thermal Conductivity SiC", SiC Composites for Fusion Applications, 2000, pp.283–287, 570~573
- Kowbel, W., "High Thermal Conductivity SiC", SiC Composites for Fusion Applications, 2000, pp.283–287(Part 1), 570~573
- Yamada, R., "Thermal Diffusivity", Conductivity of Tyranno SA Fiber- and Hi-Nicalon Type S fiber-reinforced 3-D SiC, Journal of Nuclear Materials, pp.2004, 329–333[DOI]
- Levine, S. R., "Evaluation of Ultra-high Temperature Ceramics for Aero Propulsion Use", J. European Ceramic Society, 22, pp.2757~2767 (2002)
- Park, H. J., "Microstructure and High-temperature Strength of Si3N4-SiC Nanocomposite", Journal of the European Ceramic Society, 18, pp.907~914 (1998)
- Poortemana, M., "Silicon Nitride", silicon Carbide Nanocomposite Obtained by Nitridation of SiC : Fabrication and High Temperature Mechanical Properties, 2003, pp.23, 2361~2366
- Ashby, M.F., "Engineering Materials 2: An Introduction to Microstructures and Processing" (2012), Butterworth-Heinemann
- Larochelle, K. J., "Tensile Stress Rupture Behavior of a Woven Ceramic Matrix Composite in Humid Environments at Intermediate Temperature Y Part I", Applied Composite Materials, 13, pp.147~172 (2006)
- Shao, J., "Theoretical Models and Influencing Factor Analysis for the Temperature-dependent Tensile Strength of Ceramic Fibers and Their Unidirectional Composites", Composite Structures, 164, pp.23~31 (2017)
- Denga, Y., "Temperature Dependent First Matrix Cracking Stress Model for the Unidirectional Fiber Reinforced Ceramic Composites", Journal of the European Ceramic Society, 37, pp.1305~1310 (2017)
- Robinson R., "SiC Recession Caused by SiO2 scale Volatility under Combustion Conditions: I, Experimental Results and Empirical Model", Journal of the American Ceramic Society, pp.1817~1825 (1999)
- Fang, X., "Ablation of C", SiC, C, SiC–ZrB2 Composites in Dry Air and air Mixed with Water Vapor, pp.Ceramics International, 2014[DOI]
- Xu, J., "Stability of Interfaces in Hybrid EBC", TBC Coatings for Si-based Ceramics in Corrosive Environments, 2015, pp.49, 339~349
- Lee., K.N., "Development and Environmental Durability of Mullite and Mullite", YSZ Dual Layer Coatings for SiC and Si3N4 Ceramics, 1996, pp.86–87, 142~148
- Ueno, S., "Corrosion and Recession Mechanism of Lu2Si2O7", mullite Eutectic, 2008, pp.28, 2359~2361
- Lee, K. N., "Rare Earth Silicate Environmental Barrier Coatings for SiC", SiC Composites and Si3N4Ceramics, 2005, pp.25, 1705~1715
- Xu, Y., "Rare Earth Silicate Environmental Barrier Coatings : Present Status and Prospective", Ceramics International, 43, pp.5847~5855 (2017)
- Lee, K. H., "Current State and Application of Carbon Composites", Prospect of Industrial Chemistry, 17, pp.40~47 (2014)
- Richards, B. T., "Structure, Composition, and Defect Control During Plasma Spray Deposition of Ytterbium Silicate Coatings", Journal of Materials Science, 50, pp.7939~7957 (2015)
- Richards, B. T., "Mechanical Properties of Air Plasma Sprayed Environmental Barrier Coating (EBC) Systems: Preliminary Assessments", Developments in Strategic Ceramic Materials : Ceramic Engineering and Science Proceedings, 36, pp.219~237 (2015)
- Kucuk, A., "Influence of Plasma Spray Parameters on Mechanical Properties of Yttria Stabilized Zirconia Coatings. I : Four Point Bend Test", Materials Science and Engineering : A, 284, pp.29~40 (2000)
- Franco, A., "Contact Stresses in Adhesive Joints due to Differential Thermal Expansion with the Adherents", International Journal of Solids and Structures, 87, pp.26~38 (2016)
- 풍범걸, "분무건조 및 대기 플라즈마 용사에 의한 탄화규소 세라믹스용 내환경 코팅재의 제조 및 평가", 한국세라믹학회지, 51(5), pp.481~486 (2014), 한국세라믹학회[DOI]
- Ali, A.A., "Thermal Residual Stress in Environmental Barrier Coated Silicon Nitride-Modeled", Advanced Ceramic Coatings and Interfaces IV: Ceramic Engineering and Science Proceedings, 30, pp.105~111
- Oliver, W. C., "Measurement of Hardness and Elastic Modulus by Instrumented Indentation : Advances in Understanding and Refinements to Methodology", Journal of Materials Research, 19, pp.3~20 (2004)
- KeeSungLee, "Effect of Elastic Modulus Mismatch on the Contact Crack Initiation in Hard Ceramics Coating Layer", Journal of Mechanical Science and Technology, 17(12), pp.1928~1937 (2003), 대한기계학회
- Hutchinson, J. W., "Mixed Mode Cracking in Layered Materials", Advances in Applied Mechanics, 29, pp.63~191 (1992)
- Bermejo, R., "High Failure Resistance Layered Ceramics Using Crack Bifurcation and Interface Delamination as Reinforcement Mechanisms", Engineering Fracture Mechanics, 77, pp.2126~2135 (2010)