재활용을 고려한 금속-열가소성 복합재료 하이브리드 접착 구조의분리 기술 개발
Development of Separation Technology for Adhesively Bonded Hybrid Structures of Metals and Thermoplastic Composites Considering Recycling
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
최근 들어 금속과 복합재료를 혼합하여 자동차 부품을 제작함으로써 구조의 기능성을 만족하면서도 무게를 줄이고자 하는 연구가 진행되고 있다. 환경문제로 인해 전기전자제품 및 자동차의 재활용 규제가 강화되고있음을 고려하여, 자동차 재활용 업체 관계자의 설문을 통하여 금속과 복합재료 하이브리드 구조의 재활용율 향상을 위한 요소 기술을 도출하였다. 필요한 요소 기술 중 기술적으로 해결할 수 있는 금속-복합재료 하이브리드접착 구조의 분리 기술에 대한 기초 연구를 진행하였으며, 재활용 현장에서 쉽게 도입할 수 있는 분리 기법을 제안하였다.
Abstract
Multi-material design with metals and composites can keep structural functions as well as reduce the weight of automotive parts. However, recycling of automotive parts should be considered due to the increasing emphasis on the environments and pollutions. We derived the key issues for increasing the recycling rate of automotive parts by carrying out a survey targeting representatives and workers related with automotive recycling. The core of the key issues was the separation technology of adhesively bonded metal-composite hybrid structures, so we conducted the basic research and suggested the separation technology which can easily be adopted into the recycling industries.
참고문헌 (20)
- A Study on Enhancing Recycling of Plastics in End-of-Life Vehicles, Final Report of Korea Automotive Recycles Association, "Jung, I.L.", ~ (2010)
- 박정환, "폐자동차의 실질적 재활용률 산정을 위한 모니터링 체계에 관한 연구", Clean Technology, 18(4), pp.373~378 (2012), 한국청정기술학회
- 전호석, "EU 위원회 규정 지침표(EU-COM-Table)에 의한 독일의 폐 자동차 재활용 현황", 한국폐기물자원순환학회지, 32(2), pp.115~122 (2015), 한국폐기물자원순환학회[DOI]
- Graedel, T.E., "What Do We Know About Metal Recycling Rates?", Journal of Industrial Ecology, 15(3), pp.355~366 (2011)[DOI]
- Gaustad, G., "Improving Aluminum Recycling: A Survey of Sorting and Impurity Removal Technologies", Resources, Conservation and Recycling, 58(1), pp.79~87 (2012)[DOI]
- Das, S., "Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design", SAE International Journal of Materials and Manufacturing, 7(3), pp.588~595 (2014)[DOI]
- Blunck, E., "Towrads a Circular Economy: Corporate Management and Policy Pathways", pp.75~92 (2014)
- Palmer, J., "Successful Closed-Loop Recycling of Thermoset Composites", Composites Part A: Applied Science and Manufacturing, 40(4), pp.490~498 (2009)[DOI]
- Pickering, S.J., "Recycling Technologies for Thermoset Composite Materials-Current Status", Composites Part A: Applied Science and Manufacturing, 37(8), pp.1206~1215 (2006)[DOI]
- Song, Y.S., "Life Cycle Energy Analysis of Fiber-Reinforced Composites", Composites Part A: Applied Science and Manufacturing, 40(8), pp.1257~1265 (2009)[DOI]
- Yang, Y., "Recycling of Composite Materials", Chemical Engineering and Processing: Process Intensification, 51(1), pp.53~68 (2012)[DOI]
- DeMorro, C., "Next BMW 7 Series To Get Weight-Saving Carbon Fiber Core", Clean Technica, ~ (2015)
- Leijonmarch, S., "Electrolytically Assisted Debonding of Adhesives: An Experimental Investigation", International Journal of Adhesion and Adhesives, 32(1), pp.39~45 (2012)[DOI]
- Lu, Y., "A Review of Innovations in Disbonding Techniquies for Repair and Recycling of Automotive Vehicles", International Journal of Adhesion and Adhesives, 50(1), pp.119~127 (2014)[DOI]
- Banea, M.D., "Debonding on Command of Adhesive Joints for the Automotive Industry", International Journal of Adhesion and Adhesives, 59(1), pp.14~20 (2015)[DOI]
- "Road Vehicles - Recyclability and Recoverability - Calculation Method, ISO 22628", ~ (2002)
- Brian, T., "How to Best Recycle or Handle auto Shredder Residue (ASR) Remains a Subject of Debate and a Topic for Research", Recycling Today, ~ (2012)
- "Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding, ASTM D5868", ~ (2014)
- "Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading, ASTM D3807", ~ (2012)
- Kinloch, A.J., "Adhesion and Adhesives: Science and Technology" (1978), Chapman & Hall