저온 분사 공정을 위한 금속입자/에폭시 복합재료 접착제의 소성 거동의 균질화 기법 연구
Homogenization of Plastic Behavior of Metallic Particle/Epoxy Composite Adhesive for Cold Spray Deposition
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
저온 분사된 입자와 섬유강화 복합재료 사이의 접착력을 향상시키기 위해 금속 메쉬와 금속 입자/에폭시 접착제가 조합된 중간층이 도입되었다. 저온 분사 입자 및 금속 메쉬 그리고 금속 입자에는 모두 알루미늄을 활용하였다. 높은 변형률 속도에서 중간 층의 응력을 예측하기 위해서는 접착제 물성의 측정 또는 계산이 필요하다. 따라서, 본 연구에서는 금속 입자/에폭시 접착제의 물성을 계산하기 위해 rule of mixture를 활용한 균질화 기법의 연구를 진행하였다. 균질화 기법의 검증을 위해 금속 메쉬/접착제로 구성된 중간층에 알루미늄 입자를 활용한 저온 분사를 진행하여, 실험으로 측정된 입자의 침투 깊이를 유한요소 해석에서 계산된 입자의 침투 깊이와 비교하였다. 시험과 해석에서 저온 분사 입자 혹은 중간층에 도입된 입자 하나 수준 크기의 침투 결과를 확인하였고, 이를 통해 높은 변형률 속도를 갖는 입자강화 복합재료 층의 물성 예측에 있어 균질화 기법이 적용될 수 있는 가능성을 확인하였다.
Abstract
A combination of a metallic mesh and an adhesive layer of metallic particle/epoxy composite was introduced as an intermediate layer to enhance the adhesion between cold-sprayed particles and fiber-reinforced composites (FRCs). Aluminum was considered for both the metallic particles in the adhesive and the metallic mesh. To predict the mechanical characteristics of the intermediate bond layer under a high strain rate, the properties of the adhesive layer needed to be calculated or measured. Therefore, in this study, the Al particle/epoxy adhesive was homogenized by using a rule of mixture. To verify the homogenization, the penetration depth, and the thickness decrease after the cold spray deposition from the undeformed surface, was monitored with FE analysis and compared with experimental observation. The comparison displayed that the penetration depth was comparable to the diameters of one cold spray particle, and thus the homogenization approach can be reasonable for the prediction of the stress level of particulate polymer composite interlayer under a high strain rate for cold spray processing.
참고문헌 (23)
- Majumdar, J. D., "Handbook of Manufacturing Engineering and Technology", pp.2805~2850 (2015)
- Rokni, M. R., "Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray", Journal of Thermal Spray Technology, 26, pp.1308~1355 (2017)
- Cavaliere, P., "Cold-Spray Coatings: Recent Trends and Future perspectives", pp.168~ (2017)
- Schmidt, T., "From Particle Acceleration to Impact and Bonding in Cold Spraying", Journal of Thermal Spray Technology, 18, pp.794~808 (2009)
- Assadi, H., "Bonding Mechanism in Cold Gas Spraying", Acta Materialia, 51, pp.4379~4394 (2003)
- Che, H., "Cold Spray of Mixed Metal Powders on Carbon Fibre Reinforced Polymers", Surface and Coatings Technology, 329, pp.232~243 (2017)
- Che, H., "Metallization of Carbon Fibre Reinforced Polymers by Cold Spray", Surface and Coatings Technology, 313, pp.236~247 (2017)
- Rezzoug, A., "Thermal Spray Metallisation of Carbon Fibre Reinforced Polymer Composites : Effect of top Surface Modification on Coating Adhesion and Mechanical Properties", Surface and Coatings Technology, 333, pp.13~23 (2018)
- Affi, J., "Fabrication of Aluminum Coating onto CFRP Substrate by Cold Spray", Materials Transactions, 52, pp.1759~1763 (2011)
- Rokni, M. R., "Depositing Al-Based Metallic Coatings onto Polymer Substrates by Cold Spray", Journal of Thermal Spray Technology, 28, pp.1699~1708 (2019)
- Gillet, V., "Development of Low Pressure Cold Sprayed Copper Coatings on Carbon Fiber Reinforced Polymer(CFRP)", Surface and Coatings Technology, 364, pp.306~316 (2019)
- Johnson, G. R., "A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures", 7th Int. Symp. Ballist, pp.541~547 (1983)
- Fardan, A., "Numerical Modelling of Particle Impact and Residual Stresses in Cold Sprayed Coatings : A Review", Surface and Coatings Technology, 409, pp.126835~ (2021)
- 배규열, "유한요소 시뮬레이션을 통한 저온 분사 코팅의 계면 접합에 대한 연구", 대한용접접합학회지, 26(6), pp.74~80 (2008), 대한용접접합학회
- Bae, G., "Bonding Features and Associated Mechanisms in Kinetic Sprayed Titanium Coatings", Acta Materialia, 57, pp.5654~5666 (2009)
- Bae, G., "Nanostructure Formation and Its Effects on the Mechanical Properties of Kinetic Sprayed Titanium Coating", Mater Sci Eng A, 527, pp.6313~6319 (2010)
- Kumar, S., "Correlation of Splat State with Deposition Characteristics of Cold Sprayed Niobium Coatings", Acta Materialia, 130, pp.177~195 (2017)
- Kumar, S., "Estimation of Inter-splat Bonding and Its Effect on Functional Properties of Cold Sprayed Coatings", Surface and Coatings Technology, 420, pp.127318~ (2021)
- Rae, P. J., "The Mechanical Properties of Poly(ether-ether-ketone)(PEEK)with Emphasis on the Large Compressive Strain Response", Polymer, 48, pp.598~615 (2007)
- Lemiale, V., "Temperature and Strain Rate Effects in Cold Spray Investigated by Smoothed Particle Hydrodynamics", Surface and Coatings Technology, 254, pp.121~130 (2014)
- Yin, S., "Effect of Substrate Hardness on the Deformation Behavior of Subsequently Incident Particles in Cold Spraying", Applied Surface Science, 257, pp.7560~7565 (2011)
- Bae, G., "General Aspects of Interface Bonding in Kinetic Sprayed Coatings", Acta Materialia, 56, pp.4858~4868 (2008)
- Yin, S., "Deposition Features of Ti Coating Using Irregular Powders in Cold Spray", Journal of Thermal Spray Technology, 23, pp.984~990 (2014)