The Effect of Vertical Strut in Circular Arch Lattice Structure by Selective Laser Sintering for Lightweight Structure
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The sandwich structure, consisting of a core and a facesheet, is used for lightweight structural application. Generally, cellular structures like honeycomb, foam, and lattice structures are utilized for the core. Among these, lattice structures have several advantages over other types of structures. In other studies, curved lattice structures were reported to have higher mechanical properties than straight structures by converting shear stresses acting on the structure into compressive stresses. Moreover, the addition of vertical struts can have a positive effect on the mechanical properties of the lattice structure. For the purpose, two lattice structures with Circle Arch (CC) and Circular Arch with a vertical column (CC_C) were studied, which were fabricated by using selective laser sintering was conducted. The result showed that CC_C has dramatic performance improvements in specific strength, modulus, and strain energy density compared to CC, confirming that vertical struts play a significant role in the lattice core. Finite element analysis was employed to determine the cause of the stress behavior of CC and CC_C. This study is expected to help design structurally superior lattice cores.
Abstract
The sandwich structure, consisting of a core and a facesheet, is used for lightweight structural application. Generally, cellular structures like honeycomb, foam, and lattice structures are utilized for the core. Among these, lattice structures have several advantages over other types of structures. In other studies, curved lattice structures were reported to have higher mechanical properties than straight structures by converting shear stresses acting on the structure into compressive stresses. Moreover, the addition of vertical struts can have a positive effect on the mechanical properties of the lattice structure. For the purpose, two lattice structures with Circle Arch (CC) and Circular Arch with a vertical column (CC_C) were studied, which were fabricated by using selective laser sintering was conducted. The result showed that CC_C has dramatic performance improvements in specific strength, modulus, and strain energy density compared to CC, confirming that vertical struts play a significant role in the lattice core. Finite element analysis was employed to determine the cause of the stress behavior of CC and CC_C. This study is expected to help design structurally superior lattice cores.
참고문헌 (24)
- Ashby, M. F., "The Mechanical Properties of Cellular Solids", Metallurgical and Materials Transactions A, 14, pp.1755~1769 (1983)
- Patekar, V., "State of the Art Review on Mechanical Properties of Sandwich Composite Structures", Polymer Composites, 43(9), pp.5820~5830 (2022)
- Pan, C., "Design and Optimization of Lattice Structures : A Review", Applied Science, 10, pp.6374~ (2020)
- Nur Ainin, F., "Investigating the Low-velocity Impact Behaviour of Sandwich Composite Structures with 3D-printed Hexagonal Honeycomb Core—a Review", Functional Composites and Structures, 5, pp.012001~ (2023)
- Nur Ainin, F., "Low-velocity Impact Behavior of sandwich Composite Structure with 3D Printed Hexagonal Honeycomb Core : Varying Core Materials", Functional Composites and Structures, 4, pp.035007~ (2022)
- Wadley, H. N. G., "Cellular Metals Manufacturing", Advanced Engineering Materials, 4, pp.726~733 (2002)
- Olakanmi, E. O., "A Review on Selective Laser Sintering", melting(SLS, Progress in Materials Science, pp.2015, 74[DOI]
- Abou-Ali, A. M., "On the Effect of Lattice Topology on Mechanical Properties of SLS Additively Manufactured Sheet-, Ligament-and Strut-Based Polymeric Metamaterials", Polymers, 14(21), pp.4583~ (2022)
- Maskery, I., "Insights into the Mechanical Properties of Several Triply Periodic Minimal Surface Lattice Structures Made by Polymer Additive Manufacturing", Polymer, 152, pp.62~71 (2018)
- Maskery, I., "Effective Design and Simulation of Surfacebased Lattice Structures Featuring Volume Fraction and Cell Type Grading", Materials and Design, 155, pp.202~232 (2018)
- Syam, W. P., "Design and Analysis of Strut-based Lattice Structures for Vibration Isolation", Precision Engineering, 52, pp.494~506 (2018)
- Gregory, W. K., "Compressive Behavior of Age Hardenable Tetrahedral Lattice Truss Structures Made from Aluminium", Acta Materialia, 52, pp.4229~4237 (2004)
- Queheillalt, D. T., "Pyramidal Lattice Truss Structures with Hollow Trusses", Materials Science and Engineering : A, 397, pp.132~137 (2005)
- Queheillalt, D. T., "Titanium Alloy Lattice Truss Structures", Materials & Design, 30, pp.1966~1975 (2009)
- Wang, B., "Mechanical Behavior of the Sandwich Structures with Carbon Fiber-reinforced Pyramidal Lattice Truss Core", Materials & Design(1980-2015), 31, pp.2659~2663 (2010)
- Wang, R., "Novel Topological Design of 3D Kagome Structure for Additive Manufacturing", Rapid Prototyping Journal, 24, pp.261~269 (2018)
- Wei, K., "Mechanical Responses of Titanium 3D Kagome Lattice Structure Manufactured by Selective Laser Melting", Extreme Mechanics Letters, 23, pp.41~48 (2018)
- Yao, J., "Study on the Quasistatic Compression Performance of Arch Microstrut Lattice Structure by Selective Laser Melting", Advanced Engineering Materials, 24, pp.2101156~ (2021)
- Ding, R., "Mechanical Properties and Deformation Behaviour of ARCH and BCT Lattice Structures Manufactured by Selective Laser Melting", 2020 IOP Conf. Ser.: Mater. Sci. Eng., 727 (2020)
- Shen, Y., "The Mechanical Properties of Sandwich Structures Based on Metal Lattice Architectures", Journal of Sandwich Structures and Materials, 12, pp.159~180 (2010)
- Kumar, P., "Evaluation of Energy Absorption Enhancement of Additively Manufactured Polymer Composite Lattice Structures", Functional Composites and Structures, 5, pp.015005~ (2023)
- Bai, L., "Improved Mechanical Properties and Energy Absorption of Ti6Al4V Laser Powder Bed Fusion Lattice Structures Using Curving Lattice Struts", Material & Design, 211, pp.110140~ (2021)
- Lindberg, A., "Mechanical Performance of Polymer Powder Bed Fused Objects – FEM Simulation and Verification", Additive Manufacturing, 24, pp.577~586 (2018)
- Kozak, J., "Accuracy Problems of Additive Manufacturing Using SLS", SLM Processes, 2018, ~