미시역학적 파손 기준을 이용한 탄소섬유/에폭시 복합재 링크의 안전성 평가
Safety evaluation of carbon fiber/epoxy composite link using micromechanics of failure criterion
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 경량화를 위해 금속 링크를 탄소섬유/에폭시 복합재 링크로 대체하고자 파손 기준을 이용하여 복합재 링크가 주어진 하중 조건을 견딜 수 있는지를 평가하였다. 복합재의 파손 양상을 예측하기 위해 MMF 기준을 이용하였고, 기계적 시험을 수행하여 MMF의 기준 강도 파라미터를 구하였다. 연구결과 링크의 구멍 주위에서 응력집중이 발생하였고, 특히 굽힘 하중을 받을 때 링크 끝단과 구멍 주위에서 취약함이 드러났다. 파손 지수로부터 파손 양상을 예측하였고 매트릭스 인장 파손이 링크 끝단에서, 그리고 구멍 주위에서는 섬유의 압축 파손이 예측되었다. 본 연구를 통해 확보된 방법과 결과는 경량화를 위해 금속 부품을 탄소섬유/에폭시 복합재로 대체할 때 특정 하중 조건 하에서 복합재의 안전성을 평가하는 유용한 지침으로 활용할수 있을 것이다.
Abstract
This study explored the feasibility of replacing a metal link with a carbon fiber/epoxy composite link and assessed its capacity to withstand a given load condition using failure criteria. The micromechanics of failure (MMF) criterion was employed to predict the failure mode of the composite material, and mechanical tests were conducted to obtain reference strength parameters for MMF. The findings revealed that the stress distribution was concentrated near the hole, and weaknesses were found around the hole and at the end of the link under bending conditions. Based on the failure index, matrix tensile failure was predicted at the end of the link, and fiber compression failure occurred near the hole. These results suggest the potential benefits of using a carbon fiber/epoxy composite as a substitute for metal parts to reduce weight and evaluate their safety under specific loads.
참고문헌 (16)
- 이치승, "Hashin·Puck 파손기준 기반 적층 복합재료의 섬유 및 기지파손 평가에 관한 연구", 대한조선학회 논문집, 52(2), pp.143~152 (2015), 대한조선학회
- Echaabi, J., "Review of Failure Criteria of Fibrous Composite Materials", Polymer Composites, 17(6), pp.786~798 (1996)
- Daniel, I. M., "Failure of Composite Materials", Strain, 43(1), pp.4~12 (2007)
- Christensen, R. M., "The Comparison and Evaluation of Three Fiber Composite Failure Criteria", Proceeding of SEM Annual Conference & Exposition on Experimental & Applied Mechanics (2005)
- Hashin, Z., "Failure Criteria for Unidirectional Fiber Composites", Journal of Applied Mechanics, 47(2), pp.329~334 (1980)
- Puck, A., "Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models", Composites Science and Technology, 62, pp.1633~1662 (2002)
- Hinton, M. J., "A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates, Judged Against Experimental Evidence", Composites Science and Technology, 62, pp.1725~1797 (2002)
- Cai, H., "Long-term Fatigue Strength Prediction of CFRP Structure Based on Micromechanics of Failure", Journal of Composite Materials, 42(8), pp.825~844 (2008)
- Jin, K. K., "Distribution of Micro Stresses and Interfacial Tractions in Unidirectional Composites", Journal of Composite Materials, 42(18), pp.1825~1849 (2008)
- Ha, S. K., "Micro-Mechanics of Failure(MMF)for Continuous Fiber Reinforced Composites", Journal of Composite Materials, 42(18), pp.1873~1895 (2008)
- Nakada, M., "Multiscale Modeling for Longterm Life Prediction of CFRP Structures under Cyclic Loading", Multiscale and Multidisciplinary Modeling, Experiments and Design, 1, pp.19~32 (2018)
- Fragassa, C., "On the Structural Behaviour of a CFRP Safety Cage in a Solar Powered Electric Vehicle", Composite Structures, 252, pp.112698~ (2020)
- Takemoto, S., "Strength Evaluation of CFRP Structure of High Pressure Hydrogen Tank Based on Mesoscale Analysis", Materials Today Communications, 32, pp.103966~ (2022)
- "ASTM D4018, Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows", Annual Book of ASTM, Vol. 15.03, ~ (2017)
- "ASTM D790, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electric Insulating Materials", Annual Book of ASTM, Vol. 08.01, ~ (2017)
- ASTM D695, "ASTM D695, Standard Test Method for Compressive Properties of Rigid Plastics", Annual Book of ASTM, Vol. 08.01, ~ (2017)