Polyamide 6 입자 및 CTBN첨가 기술에 따른 에폭시/탄소섬유 복합재의 강인화 효과 및 기계적 특성
Effect of Mechanical and Toughening Characteristics of Epoxy/Carbon Fiber Composite by Polyamide 6 Particles, CTBN Addition Technology
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
에폭시계 탄소섬유복합재는 고유의 높은 취성 특성으로 인해 산업 응용에 적합성에 한계로 인성 특성을 향상시키기 위한 광범위한 연구가 진행되고 있다. 본 연구는 최소 첨가량을 활용하는 데 중점을 두고 PA6입자(p-PA6)와 CTBN에 의해 달성된 인성 메커니즘을 평가하는 데 초점을 맞춰 Mode I 파단 인성 및 인장강도 분석을 통해 다양한 농도의 p-PA6와 CTBN 첨가제, 즉 0.5, 1, 2.5 및 5phr의 영향을 평가하였다. p-PA6는 1phr의 비교적 낮은 비율에서 인성이 강화되었으며, 인장강도를 유지하면서 동시에 향상된 인성에 기여하는 지속적인 파단 거동으로 나타났다. 또한, p-PA6의 입자 응집에 영향에 의해 전체적인 인성 메커니즘에 영향을 미치는 것을 확인하였다. CTBN첨가는 2.5phr 이상의 높은 농도에서 인성의 증가하나, 인장강도의 감소를 동반하고 취성을 나타내는 기존의 복합재와 유사한 파단 거동을 관찰하였으며, p-PA6, CTBN 두 첨가 기술은 특정 농고 조건에서 인장강도를 미세하게 향상시키는 것으로 확인하였다. 해당 결과를 통해 p-PA6, CTBN 강화 기술 적용에 최적화된 조건이 확립하였다.
Abstract
Epoxy-based carbon fibers reinforced plastic (CFRP) exhibit limitations in their suitability for industrial applications due to high brittleness characteristics. To address this challenge, extensive investigations are underway to enhance their toughness properties. This research focuses on evaluating the toughening mechanisms achieved by Polyamide 6 particles(p-PA6) and Carboxyl-Terminated Butadiene-Acrylonitrile (CTBN) elastomer, with a specific emphasis on utilizing minimal additive quantities. The study explores the impact of varying concentrations of p-PA6 and CTBN additives, namely 0.5, 1, 2.5, and 5phr, through comprehensive Mode I fracture toughness and tensile strength analyses. The inclusion of p-PA6 demonstrated improvements in toughness when introduced at a relatively low content of 1phr. This improvement manifested as a sustained fracture behavior, contributing to enhanced toughness, while simultaneously maintaining the material's tensile strength. Furthermore, the investigation revealed that the incorporation of p-PA6 affected in particle aggregation, thus influencing the overall toughening mechanism. Incorporation of CTBN, an elastomeric modifier, exhibited a pronounced increase in fracture toughness at higher concentrations of 2.5phr and beyond. However, this increase in toughness was accompanied by a reduction in tensile strength, resulting in fracture behavior similar to conventional CFRP exhibiting brittleness. The synergy between p-PA6, CTBN and CFRP appeared to marginally enhance tensile strength under specific content conditions. As a result of this study, optimized conditions for the application of the p-PA6, CTBN toughening technology have been identified and established.
참고문헌 (24)
- Gabr, M. H., "A Study on Mechanical Properties of Bacterial Cellulose", epoxy Reinforced by Plain Woven Carbon Fiber Modified with Liquid Rubber, 2010, pp.41(9), 1263~1271
- Hayes, B. S., "Toughened Carbon Fiber Prepregs Using Combined Liquid and Preformed Rubber Materials", Polymer Engineering & Science, 41(2), pp.170~177 (2001)
- Monteserín, C., "Effect of Different Types of Electrospun Polyamide 6 Nanofibres on the Mechanical Properties of Carbon Fibre", epoxy Composites, 2018, pp.10(11), 1190~
- Kinloch, A. J., "The Toughening of Cyanateester Polymers Part I Physical Modification Using Particles, Fibres and Woven-mats", Journal of Materials Science, 37, pp.433~460 (2002)
- Hsieh, T. H., "The Toughness of Epoxy Polymers and Fibre Composites Modified with Rubber Microparticles and Silica Nanoparticles", Journal of Materials Science, 45, pp.1193~1210 (2010)
- 김성황, "Effect of Graphitic Nanofibers on Interfacial Adhesion and Fracture Toughness of Carbon Fibers-reinforced Epoxy Composites", Composites Research, 34(2), pp.82~87 (2021), 한국복합재료학회[DOI]
- Wu, J., "Effect of the Addition of Thermoplastic Resin and Composite on Mechanical and Thermal Properties of Epoxy Resin", Polymers, 14(6), pp.1087~ (2022)
- Gu, H., "A Low Loading of Grafted Thermoplastic Polystyrene Strengthens and Toughens Transparent Epoxy Composites", Journal of Materials Chemistry C, 5(17), pp.4275~4285 (2017)
- Chaudhary, S., "Toughening of Epoxy with Preformed Polyethylene Thermoplastic Filler", Polymer-Plastics Technology and Engineering, 54(9), pp.907~915 (2015)
- Zhou, Y., "A Multi-state Progressive Cohesive Law for the Prediction of Unstable Propagation and Arrest of Mode-I Delamination Cracks in Composite Laminates", Engineering Fracture Mechanics, 248, pp.107~684 (2021)
- Chaudhary, S., "Toughening of Epoxy with Preformed Polyethylene Thermoplastic Filler", Polymer-Plastics Technology and Engineering, 54(9), pp.907~915 (2015)
- Akbari, R., "Toughening of Dicyandiamide-cured DGEBA-based Epoxy Resins by CTBN Liquid Rubber", Iranian Polymer Journal, 22, pp.313~324 (2013)
- Xie, Z., "Carboxyl-terminated Butadiene-acrylonitrile-modified Carbon Paper for Use of Gas Diffusion Layer in PEM Fuel Cells", International Journal of Hydrogen Energy, 40(41), pp.14345~14352 (2015)
- Ramos, V. D., "Modification of Epoxy Resin : A Comparison of Different Types of Elastomer", Polymer Testing, 24(3), pp.387~394 (2015)
- Bian, X., "Mechanical, Thermal, and Electrical Properties of BN–Epoxy Composites Modified with Carboxyl-terminated Butadiene Nitrile Liquid Rubber", Polymers, 11(10), pp.1548~ (2019)
- Shukla, S. K., "Blends of Modified Epoxy resin and Carboxyl-terminated Polybutadiene", Journal of Applied Polymer Science, 100(3), pp.1802~1808 (2006)
- Ma, S. Q., "Modification of Epoxy Resins with Polyether-g-polysiloxanes", Iranian Polymer Journal, 19(3), pp.185~196 (2010)
- Devi, A., "Studies on the Blends of Cardanol-based Epoxidized Novolac Type Phenolic Resin and Carboxyl-terminated Polybutadiene (CTPB), I", Materials Science and Engineering: A, 458(1-2), pp.336~347 (2007)
- Mathew, V. S., "Epoxy Resin", liquid Natural Rubber System : Secondary Phase Separation and Its Impact on Mechanical Properties, 2010, pp.45, 1769~1781
- Shaker, K., "Influence of Silica Fillers on Failure Modes of Glass", vinyl Ester Composites under Different Mechanical Loadings, 2019, pp.218, 106605~
- Girodet, C., "Influence of the Addition of Thermoplastic Preformed Particles on the Properties of an Epoxy", anhydride Network, 1996, pp.31, 2997~3002
- 박하늘, "다양한 사이징제가 반응중합에 의해 제조된 나일론 6", 탄소섬유 복합체의물성에 미치는 영향, 2018, pp.31(6), 299~303[DOI]
- Mansouri, K., "Mechanical Behavior of Particle Reinforced Thermoplastic Matrix Composites Using Finite Element Modeling", Journal of Nano-and Electronic Physics, 12(5), pp.05004~ (2020)
- Thirunavukkarasu, N., "Study on the Interface Toughening of Particle", fibre Reinforced Epoxy Composites with Molecularly Designed Core–shell Particles and Various Interface 3D Models, pp.225, 111510~