유한요소해석을 위한 골판지 소재의 물성측정 및 분석
Measurement and Analysis of the Material Behavior of Corrugated Paperboard for Finite Element Analysis
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 논문에서는 친환경 포장재인 골판지의 기계적 물성을 측정하고, 이를 LS-DYNA의 MAT_PAPER 모델에 적용하여 유한요소해석을 수행하였다. MAT_PAPER는 주로 종이의 거동을 모델링 하기 위한 재료모델이지만 본 연구를 통해 골판지에 대해서도 적용 가능함을 보였다. 인장, 압축, 전단 거동에 대하여 골판지의 방향별 기계적 물성을 측정 및 분석하고, 이를 바탕으로 6개의 항복면을 도출하여 MAT_PAPER 모델에 통합하였다. 재료시험 시편의 유한요소해석과 골판지 사각관의 저속 붕괴해석 결과를 각 실험 결과와 비교함으로써, 골판지의 거동을 등가적으로 잘 고려할 수 있음을 보였다. 그러나 해당 모델은 골판지의 변형률 속도효과를 고려하지 못하므로, 골판지의 원소재인 원심지의 고속물성을 측정하여 이를 보정하였으며, 이에 따라 골판지 사각관의 고속 압괴 실험 결과와 잘 일치함을 보였다.
Abstract
This paper measures the mechanical properties of corrugated cardboard, an eco-friendly packaging material, and applies these measurements to the MAT_PAPER model in LS-DYNA for finite element analysis. Although MAT_PAPER is primarily designed for modeling the behavior of paper, this research demonstrates its applicability to corrugated cardboard as well. Tensile, compression, and shear behaviors of a corrugated cardboard were measured and analyzed, and based on these results, six yield surfaces were derived and integrated into the MAT_PAPER model. By comparing the finite element analysis of the material tests and the low velocity collapse analysis of the corrugated cardboard square boxes with each experimental results, it was shown that the behavior of corrugated cardboard could be equivalently considered well by the MAT_PAPER model. However, since the model is not rate-dependent, the high strain rate properties of liner materials were measured and used for strain rate correction. Consequently, this matches well with the results of the high-speed compression tests of the corrugated cardboard square boxes.
참고문헌 (12)
- Fadiji, T., "Investigating the Mechanical Properties of Paperboard Packaging Material for Handling Fresh Produce Under Different Environmental Conditions : Experimental Analysis and Finite Element Modelling", Journal of Applied and Computational Mechanics, 9(2), pp.20~34 (2017)
- Park, J. M., "Finite Element-Based Simulation for Edgewise Compression Behavior of Corrugated Paperboard for Packaging of Agricultural Products", Applied Sciences, 10(19), pp.6716~6723 (2020)
- Kang, S. G., "Effective Equivalent Finite Element model for Impact Limiter of Nuclear Spent Fuel Shipping Cask made of Sandwich Composites Panels", Composites Research, 28(2), pp.58~64 (2015)
- Simon, J. W., "A Review of Recent Trends andChallenges in Computational Modeling of Paper and Paperboard at Different Scales", Archives of Computational Methods in Engineering, 28, pp.2409~2428 (2021)
- Xia, Q. S., "Mechanics of Inelastic Deformation and Delamination in Paperboard", Ph.D, pp.2002
- Nygårds, M., "Experimental and Numerical Studies of Creasing of Paperboard", International Journal of Solids and Structures, 46, pp.2493~2505 (2009)
- Karlsson, J., "*MAT_PAPER and *MAT_COHESIVE_PAPER: Two New Models for Paperboard Materials", 14th International LS-DYNA Users Conference (2016)
- Rodrigues, D., "Experimental Tests and Numerical Simulations for Failure Investigation on Corrugated Boxes Used on Household Appliance Packaging", Journal of Applied Packaging Research, 10(3), pp.56~69 (2018)
- Luong, V. D., "Finite Element and Experimental Investigation on the Effect of Repetitive Shock in Corrugated Cardboard Packaging", Journal of Applied and Computational Mechanics, 7(2), pp.820~830 (2021)
- "LS-DYNA Keyword User’s Manual, ANSYS", ~ (2024)
- Sekhar, C., "Corrugated Fiber Board as a Packaging Material: Experimental and Numerical Analysis of the Mechanical Behavior", 15th International LS-DYNA Users Conference (2018)
- ASTM International, "Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus", ASTM D828-97, ~ (2002)