비 직교 물성 모델을 이용한 복합재료 계란판의 압축거동 및 파손
Compressive and failure behaviour of composite egg-box panel using non-orthogonal constitutive model
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 직조섬유복합재료를 이용한 계란판 모양의 시편에 대한 드래이핑 공정과 압축 해석을 비직교성 재료 모델을 이용하여 수행하였다. 비 직교 재료 구성 모델은 Xue 등이 2003년에 발표한 것을 상용 프로그램인 LS-DYNA에서 제공하는 사용자 부프로그램 (user subroutine)을 이용하여 본 연구에 적용하였다. 비 직교 재료 구성 모델에서 방향성은 변형 기울기 텐서를 이용하여 계산하였고, 각 단계마다 재료 물성 행렬을 갱신하였다. 비 직교 물성 모델은 바이어스 인장 실험 결과와 비교 검증을 한 후에 계란 판 성형에 적용하였다. 계란 판 해석을 위해 본 연구에서는 열 성형 공정 (드래이핑)과 압축해석을 수행하였다. 압축 해석을 위한 유한요소 모델은 드래이핑 해석으로부터 얻은 유한요소결과를 이용하여 구축하였다.
Abstract
In the current study, thermoforming and compression analysis were carried out for the woven composite egg-box panel with the non-orthogonal constitutive material model, which is proposed by Xue et al. The material model is implemented in commercial engineering software, LS-DYNA, with a user subroutine. Directional properties in non-orthogonal coordinates are determinedusing the deformation gradient tensor and the material modulus matrix in local coordinate is updated at each corresponding time step. After the implemented non-orthogonal constitutive model is verified by the bias extension test, the egg-box panel simulations are performed. The egg-box panel simulations are divided into two categories: thermoforming (draping) and crushing. The finite element model for crushing analysiscan be obtained using the displacement result of thermoforming process.
참고문헌 (28)
- 전성식, "통계적 유한요소모델을 이용한 발포된 금속기지 복합재료의 인장특성", 한국복합재료학회지, 17(2), pp.34~39 (2004), 한국복합재료학회
- Zupan, M., "The Plastic Collapse and Energy Absorption Capacity of Egg-box Panels", International Journal of Mechanical Sciences, 45, pp.851~871 (2003)
- Deshpande, V.S., "Energy Absorption of an Egg-box Material", Journal of the Mechanics and Physics of Solids, 51, pp.187~208 (2003)
- Potter, K.D., "The Influence of Accurate Stretch Data for Reinforcements on the Production of Complex Structural Mouldings: Part 1. Deformation of Aligned Sheets and Fabrics", Composites, 10, pp.161~167 (1979)
- Potter, K.D., "The Influence of Accurate Stretch Data for Reinforcements on the Production of Complex Structural Mouldings: Part 2. Deformation of Random Mats", Composites, 10, pp.168~173
- Sharma, S.B., "A Simplified Finite Element Model for Draping of Woven Material", Composites: Part A, 35, pp.637~643 (2004)
- Sharma, S.B., "Characterisation of Material Properties for Draping of Dry Woven Composite Material", Composites Part A, 34, pp.1167~1175 (2003)
- Prodromou, A.G., "On the Relationship Between Shear Angle and Wrinkling of Textile Composite Preforms", Composites Part A, 28, pp.491~503 (1997)
- Robertson, R.E., "Fiber Rearrangements during the Molding of Continuous Fiber Composites. I. Flat Cloth to a Hemisphere", Polymer Composites, 2, pp.126~131 (1981)
- Rozant, O., "Drapability of Dry Textile Fabric for Stampable Thermoplastic Preforms", Composites Part A, 31, pp.1167~1177 (2000)
- Mohammed, U., "Shear Deformation and Micromechanics of Woven Fabrics", Composites Part A, 31, pp.299~308 (2000)
- Buet-Gautier, K, "Experimental Analysis and Modeling of Biaxial Mechanical Behavior of Woven Composite Reinforcements", Experimental mechanics, 41, pp.260~269 (2001)
- Launay, J., "Experimental Analysis of the Influence of Tensions on In-plane Shear Behavior of Woven Composite Reinforcements", Composites Science and Technology, 68, pp.506~515 (2008)
- Zhu, B., "Large Deformation and Slippage Mechanism of Plain Woven Composite in Bias Extension", Composites Part A, 38, pp.1821~1828 (2007)
- Shahkarami, A., "A Continuum Shell Finite Element Model for Impact Simulation of Woven Fabrics", International Journal of Impact Engineering, 34, pp.104~119 (2007)
- Yu, W.R., "Non-orthogonal Constitutive Equation for Woven Fabric Reinforced Thermoplastic Composites", Composites Part A, 33, pp.1095~1105 (2002)
- Ivanov, I., "Three-dimensional Computational Micro-mechanical Model for Woven Fabric Composites", Composite Structures, 54, pp.489~496 (2001)
- Dong, L., "Solid-mechanics Finite Element Simulations of the Draping of Fabrics:a Sensitivity Analysis", Composites Part A, 31, pp.639~652 (2000)
- Daniel, I.M., "Three-dimensional Characterization of Textile Composites", Composites Part B, 39, pp.13~19 (2008)
- Hamila, N., "A Meso-macro Three Node Finite Element for Draping of Textile Composite Preforms", Applied composite materials, 14, pp.235~250 (2007)
- Xue, P., "A Non-orthogonal Constitutive Model for Characterizing Woven Composites", Composites Part A, 34, pp.183~193 (2003)
- Peng, X.Q., "A Continuum Mechanics-based Non-orthogonal Constitutive Model for Woven Composite Fabrics", Composites Part A, 36, pp.859~874 (2005)
- Lee, W, "Numerical Analysis on Double Dome Stretching Tests of Woven Composites", The 10th ESAFORM Conference, pp.1052~1057 (2007)
- Chung, J.G, "Deformation and Energy Absorption of Composite Egg-box Panels", Composites Science and Technology, 67, pp.2342~2349 (2007)
- 강재훈, "직물 복합재료의 드레이핑 미소 거동 관찰:사진틀 전단실험", 한국복합재료학회지, 18(2), pp.13~19 (2005), 한국복합재료학회
- 김용수, "평직 탄소섬유 복합재료-고분자 포움 샌드위치 구조의 성형 중 미소변형에 관한 연구", 한국복합재료학회지, 17(6), pp.28~36 (2004), 한국복합재료학회
- 장승환, "직물 복합재료 계란판의 압축 특성과 에너지 흡수율", 대한기계학회논문집 A, 30(12), pp.1603~1610 (2006), 대한기계학회
- 유성환, "직조구조차이와 적층각의 변화에 따른 섬유강화복합재료의 압축특성", 한국복합재료학회지, 22(1), pp.15~21 (2009), 한국복합재료학회