이음된 초고강도 강섬유보강콘크리트 보의 휨강도에 관한 실험적 연구
An Experimental Study on the Flexural Strength of Lap Spliced Ultra High Strength Fiber Reinforced Concrete Beams
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 이음된 초고강도 강섬유보강콘크리트 부재의 휨거동을 검토하고, 현행설계기준의 초고강도 강섬유보강콘크리트 구조물의 이음 설계에 대한 안전성을 평가하기 위해 총 6개의 보에 대한 가력 실험을 수행하였다. 주요 변수는 섬유의 혼입여부와 이음 길이로 설정하였다. 혼입된 섬유는 강섬유로 2%의 부피비로 결정하였으며, 이음길이는 8db와 16db로 결정하여 실험체를 제작하였다. 실험 결과 섬유로 보강되지 않은 실험체들은 이음부에서 급격한 하중지지능력을 상실하고 철근의 항복을 경험하지 못하였으나, 섬유로 보강된 경우 16db의 이음길이가 확보되면 주인장철근의 항복을 경험할 수 있으며, 적절한 휨강도를 발현할 수 있는 것으로 나타났다. 본 연구의 실험결과를 바탕으로 현행설계기준 및 초고강도콘크리트 구조설계지침의 이음길이 산정식들을 검토한 결과 모두 보수적인 평가를 하고 있는 것으로 나타났다.
Abstract
This study examines the bending behavior of lap-spliced ultra-high-strength fiber-reinforced concrete members and evaluates the safety of the design codes for ultra-high-strength fiber-reinforced concrete structures. An experiment on a total of six beams was performed. The main variables were the fiber-inclusion and the lap-spliced length at the center of the beams. The steel fibers in a volume fraction of 2% were used, and the lap-splice lengths were determined to be 8db and 16db. As a result of the test, the specimens not reinforced with fiber lost abrupt load-bearing capacity at the lap region and did not experience yielding of the reinforcing bar. In the case of fiber-reinforced concrete, if a lap-splice length of 16db is secured, the yielding of the main reinforcing bar can be experienced, and appropriate flexural strength can be expressed. Based on the experimental results of this study, as a result of reviewing the lap-splice length calculation formulas of the current design standards and the ultra-high-strength concrete structural design recommendations, it was found that all of them were evaluated conservatively.
참고문헌 (14)
- Chen, L., "Modeling structural performance of second-generation ultrahigh-performance concrete pi-girders", Journal of Bridge Engineering, 17(4), pp.634~643 (2012)
- Richard, P., "Reactive powder concretes with high ductility and 200-800 MPa compressive strength", Special Publication, 144, pp.507~518 (1994)
- 최정일, "섬유 조합에 따른 초고성능 콘크리트의 인장거동", 한국구조물진단유지관리공학회 논문집, 19(4), pp.49~56 (2015), 한국구조물진단유지관리공학회
- Tepfers, R., "Cracking of concrete cover along anchored deformed reinforcing bars", Magazine of Concrete Research, 31(106), pp.3~12 (1979)
- Holschemacher, K., "Bond of reinforcement in ultra high strength concrete", Proceedings of the International Symposium on UHPC, pp.375~387 (2004)
- Rilem, T. C., "RC 6 Bond test for reinforcement steel. 2. Pull-out test, 1983. RILEM recommendations for the testing and use of constructions materials", 218~220 (1994)
- Saleem, M. A., "Development length of high-strength steel rebar in ultrahigh performance concrete", Journal of Materials in Civil Engineering, 25(8), pp.991~998 (2013)
- Bae, B. I., "Bond stress between conventional reinforcement and steel fibre reinforced reactive powder concrete", Construction and Building Materials, 112, pp.825~835 (2016)
- 이한주, "고강도 강섬유보강콘크리트를 적용한 프리캐스트 바닥판 이음부의 구조성능 평가", 한국구조물진단유지관리공학회 논문집, 21(6), pp.196~205 (2017), 한국구조물진단유지관리공학회
- Kim, S., "Flexural Bond Behavior of Rebar in Ultra-High Performance Concrete Beams Considering Lap-Splice Length and Cover Depth", Engineering, 8(03), pp.116~ (2016)
- KCI, "KCI Model Code 2017", pp.637~ (2017), Kimoondang Publishing Company
- Code, P., "Eurocode 2: design of concrete structures-part 1–1:general rules and rules for buildings", British Standard Institution, ~ (2005)
- Korea Concrete Institute, "Design Guidelines for K-UHPC, KCI-M-12-003", 1~66 (2012)
- AFGC(Association Française de Génie Civil), "Interim Recommendations, Ultra High Performance Fibre Reinforced Concretes", 358~ (2013)