RC 부재의 휨 보강을 위한 외부 부착형 탄소섬유판 포스트텐션 시스템
Post-tensioning System with Externally Bonded CFRP Strips for Strengthening RC Members
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Experimental study has been performed in order to investigate the behavior of RC beams strengthened with externally bonded post-tensioned CFRP (Carbon Fiber Reinforced Polymer) strips. Specimens consist of 9 small-scaled specimens with the different post-tensioning level as a main test parameter. A control specimen and specimens with simply bonded CFRP strips have been manufactured to compare the structural performances of prestressed system. From the test results, it was observed that the specimens strengthened with simply bonded CFRP strips showed debonding failure below 50% of CFRP tensile strength due to premature debonding. On the other hand, all the specimens strengthened with post- tensioned CFRP strips reached the rupture strength of the CFRP strip. The cracking and yielding loads were also increased proportionally to the post-tensioning level, but the ultimate loads were nearly equal regardless of the post-tensioning level.
Abstract
Experimental study has been performed in order to investigate the behavior of RC beams strengthened with externally bonded post-tensioned CFRP (Carbon Fiber Reinforced Polymer) strips. Specimens consist of 9 small-scaled specimens with the different post-tensioning level as a main test parameter. A control specimen and specimens with simply bonded CFRP strips have been manufactured to compare the structural performances of prestressed system. From the test results, it was observed that the specimens strengthened with simply bonded CFRP strips showed debonding failure below 50% of CFRP tensile strength due to premature debonding. On the other hand, all the specimens strengthened with post- tensioned CFRP strips reached the rupture strength of the CFRP strip. The cracking and yielding loads were also increased proportionally to the post-tensioning level, but the ultimate loads were nearly equal regardless of the post-tensioning level.
참고문헌 (15)
- 유영찬, "외부 부착 형 프리스트레스트 탄소섬유판으로 보강된 RC보의 휨 거동", 한국콘크리트학회봄학술발표논문집, pp.255~258 (2005), 한국콘크리트학회
- 유영찬, "외부프리스트레스트 탄소섬 유판에 의한 RC구조물 보강공법의 정착시스템 기본형 상 결정시험", 대한건축학회 추계학술발표대회논문집, 24(2), pp.143~146 (2004), 대한건축학회
- 유영찬, "외부 프리 스트레스트 탄소섬유판 정착장치의 콘크리트에 대한 정착성능", 한국콘크리트학회봄학술발표논문집, pp.226~229 (2006), 한국 콘크리트학회
- 유영찬, "탄소섬유복합체로 보강된 RC부재의 보강재 강성에 따른 휨 보강성능", 한국콘크 리트학회봄학술발표논문집, pp.129~132 (2006), 한국콘크리트학회
- 최기선, "외부 프리 스트레스트 탄소섬유판으로 보강된 실물모형 RC보의 휨 거동", 한국구조물진단학회봄학술발표논문집, pp.303~308 (2006), 한국 구조물진단학회
- 최기선, "탄소섬유판 으로 보강된 RC보의 휨 거동", 한국콘크리트학회봄학술 발표논문집, pp.287~290 (2005), 한국콘크리트학회
- 한국건설기술연구원, "외부프리스트레스트 탄소섬유판 에 의한 구조물 보강공법 개발 건설교통부연구개발 사업,E01-01", 277~408 (2005)
- ACI Committee 440, "Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures", ~
- ACI Committee 440, "Prestressing Concrete Structures with FRP Tendons", ~
- Design guidance for Strengthening concrete structures using fibre composite materials, "Concrete Society Technical", The Concrete Society, ~, pp.No. 55,
- CSA Standard, "Design and Construction of Building Components with Fibre-Reinforced Polymers S806-02, Canadial Standards Association", ~
- Externally bonded FRP reinforcement for RC structures, "CEB-FIP", Trechnical report, ~, pp.bulletin 14 (2001)
- El-Hacha, R., "Prestressed Carbon Fiber Reinforced Polymer Sheets for Strengthening Concrete Beams at Room and Low Temperatures", J. Composite. for Construction ASCE, 8(1), pp.3~13 (2004)
- Christopher K.Y. Leung, "Empirical Approach for Determining Ultimate FRP Strain in FRP- Strengthened Concrete Beams", Journal of Composite for Construction, pp.125~138 (2006)
- Wendel M.Sebastian, "Signigicance of midspan debonding failure in FRP-plated concrete beams", Journal of Structural Engineering, pp.792~798 (2001)