특별직교이방성 적층판의 고유진동수에 대한 형상비의 영향
The Influence of the Aspect Ratio on the Natural Frequency of the Specially Orthotropic Laminated Plates
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The simply supported laminated plates are analyzed by the specially orthotropic laminates theory. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis for such plate by means of the beam theory with unit width is reported. The plate aspect ratio considered is from 1 : 1 to 1 : 5. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms(M_x) on the relevant partial differential equations of equilibrium. In this paper. the influence of the aspect ratio on the natural frequency of the specially orthotropic laminated plates is studied and it is concluded that the method used is sufficiently accurate for engineering purposes. The result of this paper can be used for simply supported laminated plates analysis.
Abstract
Advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The simply supported laminated plates are analyzed by the specially orthotropic laminates theory. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis for such plate by means of the beam theory with unit width is reported. The plate aspect ratio considered is from 1 : 1 to 1 : 5. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms(M_x) on the relevant partial differential equations of equilibrium. In this paper. the influence of the aspect ratio on the natural frequency of the specially orthotropic laminated plates is studied and it is concluded that the method used is sufficiently accurate for engineering purposes. The result of this paper can be used for simply supported laminated plates analysis.
참고문헌 (12)
- Ashton, J. E, "Anisotropic Plate Analysis- Boundary Condition", Jour. of Composite Materials, pp.162~171 (1970)
- Goldberg, John E, "The Effect of Neglecting the Radial Moment Term in Analyzing a Sectorial Plate by Means of Finite Differences", Proc, of the Seventh International Symposium on Space Technology and Sciences (1967)
- Han, B. K, "Analysis of Steel Bridges by Means of Specially Orthotropic Plate Theory", Jour. of KSSC, 13(1), pp.61~69 (2001)
- Han, B. K, "Analysis of Prstressed Concrete Slab Bridge by Beam Theory", Jour. of KISM, 7(2), pp.115~124 (2003)
- 한봉구, "간단한 방법에 읜한 철근콘크리트 슬래브 교량의 해석", 한국구조물진단유지관리공학회 논문집, 7(4), pp.1~90 (2003), 한국구조물진단유지관리공학회
- Han, B. K, "The Influence of the Aspect Ratio on the Natural Frequency of the Composite Laminated Plates", Jour. of the Korean Society for Advanced Composite Structures, 1(2), pp.14~18 (2010)
- Kim.D.H, "A Method of Vibration Analysis of Irreqularly Shaped Structural Members", Proceedings, International Symposium on Engineering Problems in Creating Coastal Industrial Sites (1974)
- Kim,D.H, "Simple Method of Anaysis for Preliminary Design of Certain Composite Laminated Primary Structures for Civil Construction II", Journal of Materials Processing Technology, 55(Elsevier) (1993)
- Kim,D.H, "Composite Structure for Civil and Architectural Engineering" (1995), E ＆ FN Spon
- Pagano,N.J, "Exact Solution for Rectangular Bidirectional Composites and Sandwich Plates", Jour. of Composites Materials, 4(1), pp.20~34 (1970)
- Stephen P. Timoshenko, "Theory of Plates and Shells, Second Edition" (1989), Mcgraw Hill Book Co
- Whitney, J. M, "Analysis of a Simply Supported Laminated Anisotropic Rectangular Plate", Jour. of AIAA, 8(1), pp.28~33 (1970)