플라이애시 및 고로슬래그 미분말을 사용한 콘크리트의 강도 발현 예측 모델식 연구
A Study on Estimation Model of Strength Development of Concrete Using Fly Ash and Ground Granulated Blast-Furnace Slag
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
최근 콘크리트 산업은 CO2 가스 배출 저감을 목적으로 플라이애시 및 고로슬래그 미분말 등의 혼화재 사용량이 증가되고 있다. 그러나 국내의 경우 구조설계기준에서 사용되고 있는 강도 발현 예측 모델은 시멘트 종류 및 양생방법에 따른 상수값를 포틀랜드시멘트에 관해서만 규정함에 따라 플라이애시 및 고로슬래그 미분말을 혼합 사용한 콘크리트의 시간에 따른 강도 발현 특성을 반영하지 못하는 실정이다. 따라서 본 논문에서는 플라이애시 및 고로스래그 미분말을 혼합한 보통강도 및 고강도 영역의 콘크리트의 시간에 따른 강도를 평가하였으며, 혼화재 종류 및 혼합률에 따른 콘크리트 강도발현 상수 βsc 값을 제안하였다.
Abstract
Recently, the amount of the mineral admixture including fly ash and ground granulated blast-furnace slag was increased for the purpose of CO2 gas emission reduction in the concrete industry. However, in the case of korea, estimation model of strength development in concrete structural design code was prescribed a constant value according to cement type and curing method about the portland cement. therefore, the properties of strength development according to time of concrete using fly ash and ground granulated blast-furnace slag does not reflected estimation model of strength development. Accordingly, this paper was evaluated strength according to time on the concrete strength range using fly ash and ground granulated blast-furnace Slag and the strength development constant βsc of concrete according to the kind of the mineral admixture and mixing ratio was proposed.
참고문헌 (12)
- "BS EN 1992-1-1, Eurocode 2", The British Standards Institution, ~ (2004)
- Cho, B. S., "Status and Prospects of Recycling Blast Furnace Slag", Journal of the Korean Recycled Construction Resources Institute, pp.9~12 (2012)
- Choi, J. W., "Performance Based Design Code for Concrete Structures", Magazine of the Korea Concrete Institute, 20(1), pp.27~31 (2008)
- Choi, Y. W., "The Field Suitability Evaluation of Concrete Strength Development Constant", Proceedings of the Korean Society of Civil Engineers, pp.1380~1383 (2011)
- Choi, Y. W., "The Properties of Early Strength of Concrete for the Performance based Concrete", Proceedings of the Korea Concrete Institute, 21(2), pp.253~254 (2009)
- Choi, Y. W., "A Study on Appropriacy of Cement Constant Considering Strength Development of Domestic Concrete", Proceedings of the Korea Concrete Institute, 22(1), pp.321~322 (2010)
- Kim, J. S., "Development of Concrete Material Models for Performance- Based Design Code", Proceedings of the Korea Concrete Institute, 20(2), pp.975~978 (2008)
- Kong, J. S., "Performance Based Design codes and Examples", Proceedings of the Korea Concrete Institute, 18(2), pp.921~924 (2006)
- Korean Concrete Institute, "Korea Structural Concrete Design Code", ~ (2011)
- Lee, J. H., "The application plan of the high performance material for the green growth", Korean Society of Architectural Hybrid System Seminar (2009)
- Ministry of land, transport and maritime affairs, "quality control guidelines for the remicon and ascon", ~ (2011)
- Portland Cement Association, "Design and Control of Concrete Mixtures" (1988)