본문 바로가기
KERD
논문KCI 등재

고분말도 시멘트와 플라이애시를 치환한 콘크리트의 조기강도 발현 특성

Properties of Strength Development of Concrete at Early Age Using High Fineness Cement and Fly Ash

0

조회

0

다운로드

3

인용

0

참고문헌

키워드

주제분류안전공학

초록

시멘트 산업은 탄소배출 감축을 위한 주요 산업분야로 고려되고 있으며, 콘크리트 분야에서 시멘트 사용량 저감을 위한 노력이 진행되고 있다. 이에 대한 노력의 일환으로 시멘트의 일부를 대체하여 사용할 수 있는 산업부산물을 다량으로 활용하기 위한 연구가 진행되고 있다. 산업부산물을 사용한 콘크리트는 내구성, 친환경성 및 경제성 등의 장점을 가지고 있으나, 응결시간 지연, 초기강도 저하 등의 문제점이 있다. 따라서 이 연구에서는 시멘트의 사용량을 줄이고 산업부산물인 플라이애시를 치환하여 사용하면서도 초기강도가 저하되는 문제점을 해결하는 것을 목표로 하였다. 이에 따라, 먼저 고분말도 시멘트 사용에 의한 수화반응 촉진으로 양생온도에 관계없이 모든 재령에서 강도가 증진되는 것을 확인하였다. 이어서 고분말도 시멘트에 플라이애시를 치환하여 강도발현 특성을 검토한 결과, 초기 재령에서도 보통 포틀랜드 시멘트와 비교하여 동등 이상의 강도 발현이 가능하였다. 또한, 플라이애시를 30%까지 치환하여도 수직․수평부재 거푸집 해체 시기를 단축할 수 있는 것을 확인하였다.

Abstract

Cement industries are considered key industries for reducing carbon emissions, and efforts are off the ground to reduce the use of cement in the concrete sector. As a part of this effort, research is off the ground to utilize a large amount of industrial by-products that can be used as a substitute for a part of cement. Concrete using industrial by-products has advantages such as durability, environment friendliness and economical efficiency, but there are problems such as retarding and early-age strength deterioration. Therefore, this study aimed to reduce the use of cement and solve the problem of early-age strength deterioration while using fly ash, which is an industrial by-product. Accordingly, it was confirmed that the strength was improved at all ages irrespective of curing temperature by accelerating the hydration reaction by using high fineness cement. Subsequently, high fineness cement was partially replaced with fly ash and the strength development characteristics were examined. As a result, it was possible to exhibit strength equal to or higher than ordinary portland cement even at the early age. Also, it was confirmed that even when the fly ash is replaced by 30%, it is possible to shorten the time for dismantling the forms of vertical and horizontal members.

참고문헌 (7)

  1. Han, C. G., "Eco-Friendly Ready Mixed Concrete using Waste Materials and by-Products", Magazine of the Korea Concrete Institute, 28(4), pp.20~25 (2016), KCI
  2. Hong, G. H., "Development of Green Concrete Specification", Korea Institute for Structural Maintenance and Inspection, 20(2), pp.447~448 (2016), KSMI
  3. Jang, J. G., "Carbon Dioxide Utilization and Sequestration by Carbonation Curing of Cement-based Materials", Magazine of the Korea Concrete Institute, 28(4), pp.40~45 (2016), KCI
  4. Kim, J. S., "Specification and Certification of Eco-Friendly Concrete", Korea Institute for Structural Maintenance and Inspection, 20(1), pp.649~650 (2016), KSMI
  5. Korea Concrete Institute, "Engineering of Concrete", pp.40~43 (2011)
  6. Minisrty of Land, Infrastructure and Transport, "Concrete Standard Specification", 93~95 (2016)
  7. "The Paris Agreement is a wave that is hard to resist... We keep it even if United States is quit"[URL]

관련 논문AI추천

하이볼륨 플라이애시 시멘트 페이스트의 수화 및 압축강도 특성문은진, 황철성한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2017 · 제21권 제5호나노 실리카를 혼입한 하이볼륨 플라이애시 콘크리트의 수화도 및 역학적 특성이건욱, 차수원, 최영철한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2022 · 제26권 제6호플라이애시 및 고로슬래그 미분말을 사용한 콘크리트의 강도 발현 예측 모델식 연구김경환, 박만석, 정재권, 최병걸, 최연왕한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2013 · 제17권 제5호고로슬래그 시멘트 콘크리트의 압축강도에 미치는 고칼슘 플라이애시의 영향에 관한 연구강석표, 노상균, 이재국건설환경연구소 · 청운대학교 건설환경연구소 논문집2012 · 제7권 제1호하이볼륨 플라이애시 시멘트의 수화도 및 역학적 특성차수원, 최영철한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2022 · 제26권 제5호고성능 하이볼륨 슬래그 시멘트 페이스트의 고로슬래그 미분말 분말도에 따른 수화 및 강도 특성신동철, 최영철, 황철성한국구조물진단유지관리공학회 · 한국구조물진단유지관리공학회 논문집2017 · 제21권 제5호

이 간행물의 다른 논문 (20건)