폴리프로필렌섬유보강 시멘트 복합재료에 정착된 구조용 합성섬유의 부착거동에 미치는 섬유 혼입률의 효과
Effect of Fiber Volume Fraction on Bond Properties of Structural Synthetic Fiber in Polypropylene Fiber Reinforced Cement Composites
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
폴리프로필렌섬유보강 시멘트 복합재료와 구조용 합성섬유의 부착특성을 평가하였다. 폴리프로필렌섬유는 0.10%, 0.15% 및 0.20%의 체적비로 적용하여 dog-bone 시험을 실시하였다. 구조용 합성섬유와 폴리프로필렌섬유보강 시멘트 복합재료 사이의 부착강도는 폴리프로필렌섬유의 혼입률이 증가할수록 증가하였으나 0.20% 이상이 되면 감소하였다. 또한 폴리프로필렌섬유의 첨가는 계면인성과 마찰저항을 증가시킨다. 인발시험 후 구조용 합성섬유 표면의 미소구조 분석은 폴리프로필렌섬유의 혼입률이 증가할수록 긁힘 현상이 증가하였다.
Abstract
The bond properties between polypropylene fiber reinforced cement composites and structural synthetic fiber have been investigated. in this paper. Three levels of polypropylene fibers volume fraction were used, 0.10%, 0.15%, and 0.20% in a series of Dog-bone pull out tests. The bond strength between structural synthetic fiber and polypropylene fiber reinforced cement composites increases with the volume fraction of polypropylene fiber, but the bond strength decreases above the amount of 0.20% by volume of polypropylene fiber reinforced cement composites. Also, the addition of polypropylene fiber a significant improved the interface toughness and the frictional resistance, The microstructure of structural synthetic fiber surface was investigated after the pullout test. The scratched of structural synthetic fiber increased with the polypropylene fiber volume fraction.
참고문헌 (21)
- 김성배, "재생 PET 섬유로 보강된 친환경 황토 콘크리트의 역학적 특성과 휨 거동", 한국구조물진단유지관리공학회 논문집, 14(3), pp.152~159 (2010), 한국구조물진단유지관리공학회
- 원종필, "시멘트 매트릭스 내에서 폴리올레핀계 합성섬유의 친수성처리에 따른 인발거동", 대한토목학회 논문집A, 27(3A), pp.453~460 (2007), 대한토목학회
- 원종필, "고강도 시멘트 복합재료에서 단일 강섬유 및 합성섬유의 부착특성 평가", 대한토목학회 논문집A, 27(4A), pp.609~616 (2007), 대한토목학회
- 원종필, "하이브리드 섬유보강 고강도콘크리트 기둥부재의 내화성능", 콘크리트학회 논문집, 20(6), pp.827~832 (2008), 한국콘크리트학회
- Bentur, A, "Fibre reinforced cementitious composites", pp.1~377 (1990), Elsevier Applied Science
- Banthia, N, "How tough is fiber reinforced shotcrete PART. 1. Beam tests", Concrete International, 21(6), pp.59~62 (1999)
- Banthia, N, "How tough is fiber reinforced shotcrete PART. 2. Plate tests", Concrete International, 21(6), pp.62~69 (1999)
- Chan, Y. W, "Effect of silica fume on steel fiber bond characteristics in reactive powder concrete”", Cement and Concrete Research, 34(7), pp.1167~1172 (2004)
- Komlos, K, "Hybrid fibre-reinforced concrete under repeated loading", Nuclear Engineering and Design, 156(1-2), pp.195~200 (1995)
- Refection du quai No. 45du port de Montreal, Final report, "Khayat, K. H", University of Sherbrooke, 1~100 (1996)
- Lawer, J. S, "Permeability of cracked hybrid fiber-reinforced mortar under load", ACI Materials Journal, 99(4), pp.379~385 (2002)
- Mobasher, B, "Effect of interfacial properties on the crack propagation in cementitious composites", Advanced Cement Based Materials, 4(3, pp.4) (1996), 93~105
- Some development in polypropylene fibers for concrete, In Fier Reinforced Concrete, "Naaman, A. E", Amercian Concrete Institute, 375~396, pp.ACI SP-81 (1984)
- Naaman, A. E, "Bond-slip mechanism of steel fibers in concrete", ACI Materials Journal, 88(2), pp.135~145 (1991)
- Qian, C. X, "Fracture properties of concrete reinforced with steel-polypropylene hybrid fibres", Cement and Concrete Composites, 22(5), pp.343~351 (2000)
- Qian, C. X, "Development of hybrid polypropylene-steel fibre-reinforced concrete", Cement and Concrete Research, 30(1), pp.63~69 (2000)
- Shannag, M. J, "Pullout behavior of steel fibers from cement-based composites", Cement and Concrete Research, 27(6), pp.925~936 (1997)
- Singha, S, "Pullout behavior of polypropylene fibers from cementitious matrix", Cement and Concrete Research, 34(10), pp.1919~1925 (2004)
- Won, J. P, "Bond behavior and flexural performance of structural synthetic fibre reinforced concrete", Magazine of concrete research, 28(6), pp.401~410 (2006)
- Wei Sun, "The effect of hybrid fibers and agent on the shrinkage and permeability of high-performance concrete", Cement and Concrete Research, 31(4), pp.595~601 (2001)
- Xu, G, "Tensile behavior of fiber-cement hybrid composites containing polyvinyl alcohol fiber yarns", ACI Materials Journal, 95(6), pp.667~674 (1998)