강섬유의 혼입이 고강도 강섬유 보강 시멘트 복합체의 압축강도에 미치는 영향
The Effect of Steel Fiber on the Compressive Strength of the High Strength Steel Fiber Reinforced Cementitious Composites
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Many researchers have reported that adding steel fiber to concrete improved its tensile and flexural strength significantly, but relatively few studies have been made on the compressive behavior of steel fiber-reinforced concrete. It is still less in case of high strength steel fiber-reinforced cementitious composites(SFRC). The main objective of this research is to examine the effect of adding steel fiber on the compressive strength of high strength SFRC using fiber reinforcing index(RI, Vf(lf/df)). It was found from the study that compressive strength was noticeably increased in proportion to RI. In conclusion, the relationship between Reinforcing Index(RI) and compressive strength in case of high strength steel fiber-reinforced cementitious composites was suggested.
Abstract
Many researchers have reported that adding steel fiber to concrete improved its tensile and flexural strength significantly, but relatively few studies have been made on the compressive behavior of steel fiber-reinforced concrete. It is still less in case of high strength steel fiber-reinforced cementitious composites(SFRC). The main objective of this research is to examine the effect of adding steel fiber on the compressive strength of high strength SFRC using fiber reinforcing index(RI, Vf(lf/df)). It was found from the study that compressive strength was noticeably increased in proportion to RI. In conclusion, the relationship between Reinforcing Index(RI) and compressive strength in case of high strength steel fiber-reinforced cementitious composites was suggested.
참고문헌 (18)
- 부척량, "강섬유보강 콘크리트의 압축응력-변형률 특성에 관한 실험적 연구", 대한건축학회논문집, 6(6)통권 : 32, pp.295~307 (1990)
- 박정준, "초고강도 강섬유 보강 시멘트 복합체의 구성인자가 압축강도에 미치는 영향", 콘크리트학회 논문집, 17(1), pp.35~41 (2005), 한국콘크리트학회
- 초고성능 시멘트 복합재를 활용한 교량 거더 개발 중간보고서, "한국건설기술연구원", 건설교통부, ~ (2004)
- Flexural Behavior and Toughness of Fiber Reinforced Concretes, "V. Ramakrishnan", Transportation Research Record 1996, 69~77 (1996)
- L.J.M.Nelissen, "Biaxial Testing of Normal Concrete", Heron(Delft), 18(1), pp.90~ (1972)
- H. Kupfer, "Behavior of Concrete under Biaxial Stresses", ACI Journal Proceedings, 66(8), pp.656~666 (1969)
- S. P. Shah, "Fiber Reinforced Concrete Properties", ACI Journal Proceedings, 68(2), pp.126~135 (1971)
- W. F. Chen, "Stress-Strain Properties for Random Wire Reinforced Concrete", ACI Journal proceedings, 68, pp.933~936 (1971)
- G.R.Williamson, "Effect of Steel Fibers on the Compressive Strength of Concrete", pp.195~207 (1974), Fiber Reinforced Concrete, SP-44, American Concrete Institute
- P.Thiptbroto, "Tensile Strain Hardening of High Performance Fiber Reinforced Cement Based Composites", 박사, pp.1991
- A. Naaman, "Elastic Modulus of SIFCON in Tension and Compression", ACI Materials Journal, 88(6), pp.603~612 (1991)
- P. Richard, "Composition of Reactive Powder Concretes", Cement and Concrete Research, 25(7), pp.1501~1511 (1995)
- Hugo S. Armelin, "Predicting the Flexural Postcracking Performance of Steel Fiber Reinforced Concrete from the Pullout of Single Fibers", ACI Material Journal, 94(1), pp.18~31
- P. Rossi, "Effect of Steel Fiber at Two Stages: the Material and the Structure", Materials and Structures, 20, pp.436~439 (1987)
- D. A. Fanellla, "Stress- Strain Properties of Fiber Reinforced Mortar in Compression", ACI Journal, 82(4), pp.475~483 (1985)
- Yoshio Kosaka, "Experimental Study on Inelastic Stress-Strain Behavior of Steel Fiber Reinforced Concrete under Compression", Trans. of A. I. J, (337), pp.15~24 (1984)
- A. S. Ezeldin, "Normal- and High-Strength Fiber Reinforced Concrete under Compression", Journal of Materials in Civil Engineering, 4(4), pp.415~429 (1992)
- W. Yin, "Fatigue Behavior of Steel Fiber Reinforced Concrete in Uniaxial and Biaxial Compression", ACI Materials Journal, 92(1), pp.71~81 (1995)