피로손상된 용접이음의 피로수명 향상을 위한 햄머피닝 처리법의 적용
Applicability of Hammer-Peening Treatment for Fatigue Life Improvement of Fatigue Damaged Weld Joints
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 피로 손상된 용접이음의 피로수명 향상을 위한 방법으로 햄머피닝 처리법의 적용성을 검토하기 위하여 면외거셋 필렛 용접이음과 하중비전달형 리브 필렛 용접이음의 피로실험을 실시하였다. 본 실험에서는 면외거셋과 리브를 필렛 용접한 후 햄머피닝 처리를하지 않은 용접그대로의 시험편, 용접후 햄머피닝 처리한 시험편, 그리고 용접그대로 시험편의 피로수명의 50% 시점에 햄머피닝 처리를한 시험편의 피로실험을 실시하였다. 그리고 햄머피닝 처리에 의한 면외거셋과 리브 용접토우부의 형상 및 표면응력의 변화를 측정하였다. 그 결과, 햄머피닝처리에 의해 30~83MPa의 압축잔류응력이 도입 되었으며, 이로 인하여 강구조물의 제작시 용접후에 햄머피닝 처리를 실시하면 피로수명을 크게 향상 시킬 수 있을 뿐만 아니라, 이를 공용기간이 예상 피로수명의 50% 이하인 강구조물의 용접이음에 적용하여도 최소 1.3배 이상의 피로수명과 피로한계 향상효과를 기대할 수 있음을 제시하였다.
Abstract
In this study, fatigue tests were performed on longitudinal out-of-plane gusset fillet welded joints and transverse non-load-carrying cruciform rib fillet welded joints, and then applicability of hammer-peening treatment on improvement of fatigue life for fatigue damaged weld joints were investigated. Fatigue tests were carried out on three types of gusset and rib welded specimens: as-welded specimens, post-weld hammer peened specimens and hammer peened specimens at 50% of as-welded specimen’s fatigue life. Before and after hammer peening treatment, the geometry of weld toes and surface stresses near weld toes were measured. As a result of hammer peening treatment, compressive residual stresses of 30-83MPa were introduced near weld toes of the gusset and rib welded joints, and 130% increase in fatigue life and fatigue limit of the welded joints could be realized by hammer peening treatment at 50% fatigue life of as-welded conditions.
참고문헌 (13)
- Haagensen, P. J., "The Effects of Grinding and Peening on the Fatigue Strength of Welded T-Joints", International Institute of Welding (IIW) Document, XIII-1510-93, ~ (1993)
- 한정우, "공압식 헤머피닝을 이용한 용접부 피로수명 연장기술 연구", 대한기계학회논문집 A, 33(8), pp.842~848 (2009), 대한기계학회
- Hong, S., "Fatigue characteristics of non load-carrying fillet welded joints according to post-processing in weld bead toes", Journal of Korean Society of Steel Construction, 12(6), pp.701~713 (2000)
- International Institute of Welding, "Commissions XIII and XV, IIW Recommendations on post weld improvement of steel and aluminum structures", IIW Document XIII-1815-00, ~ (2001)
- International Institute of Welding, "Commissions XIII and XV, Recommendations for fatigue design of welded joints and components", IIW Document XIII-1823-07, ~ (2008)
- Japan Society of Steel Construction, "Fatigue design recommendations for steel structures" (1993), JSSC, Gihodo Shuppan
- 김인태, "강교 도장용 블라스트 표면처리에 의한 용접이음의 피로강도 향상", 한국강구조학회 논문집, 23(2), pp.137~146 (2011), 한국강구조학회
- Lim, C., "The study about the fatigue strength improvement mechanism by the processing of fillet welded joint", Journal of Korean Society of Steel Construction, 11(3), pp.319~327 (1999)
- Maddox, S. J., "Fatigue of steel Fillet Welds Hammer Peened under Load", IIW Document XIII-1690-97, ~ (1991)
- Mori, T., "Repair for fatigue cracks at connection between main girder web and lateral girder flange by bolting stop-hole method with attached plates", Journal of Japan Society of Civil Engineers, Ser. A1, 67(1), pp.493~502 (2011)
- The European Steel Design Education Programme, "WG12 Fatigue, Lecture 12.12- Determination of stress intensity factors", 22~23 (2012)
- Fatigue life analyses of welded structures, "Tom Lassen", ISTE Ltd., 372~373 (2006)
- Yamada, K., "Extending fatigue life of cracked welded joints by impact crack closure retrofit treatment", IIW-Document XIII-2289r1-09, ~ (2009)