고강도강 맞대기 용접 시험편의 루트갭 변경에 따른 피로강도 평가
Fatigue Assessment of High Strength Steel with Butt Welded Joints for the Root Gap Difference
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, a series of fatigue tests was conducted to evaluate fatigue strength for the root gap difference with high strength steel with butt welded joints. A finite element analysis using effective notch stress method was also performed to compare effective notch factors each other with butt welded specimens made by copper backing. The results of fatigue tests were classified according to the root gap difference. Fatigue life of butt welded specimens is presented for determining the root gap of high strength steel with butt welded joints in terms of fatigue strength. Then effective notch stress was applied to interpret fatigue strength of butt welded specimen model which is reflected actual measured dimensions. As a result, fatigue strength of high strength steel with butt welded specimens is increased by root gap gets longer in length.
Abstract
In this study, a series of fatigue tests was conducted to evaluate fatigue strength for the root gap difference with high strength steel with butt welded joints. A finite element analysis using effective notch stress method was also performed to compare effective notch factors each other with butt welded specimens made by copper backing. The results of fatigue tests were classified according to the root gap difference. Fatigue life of butt welded specimens is presented for determining the root gap of high strength steel with butt welded joints in terms of fatigue strength. Then effective notch stress was applied to interpret fatigue strength of butt welded specimen model which is reflected actual measured dimensions. As a result, fatigue strength of high strength steel with butt welded specimens is increased by root gap gets longer in length.
참고문헌 (9)
- 최동호, "면외거셋형 고강도강(POSTEN 80)의 피로균열진전해석", 대한토목학회 논문집A, 22(1-A), pp.123~130 (2002), 대한토목학회
- 도현덕, "맞대기 용접 시편의 백플레이트에 따른 피로강도 평가", 대한조선학회 논문집, 46(1), pp.24~30 (2009), 대한조선학회
- Han, M.S, "An Experimental Study on Fatigue Fracture Behaviour of Surface Crack in Finite Plates and Fillet Welded T-Joint", Journal of the Society of Naval Architects of Korea, 28(2), pp.275~284 (1991)
- Hobbacher, A, "Fatigue design of welded joints and components: Recommendations of IIW Joint Working Group XIII-XV" (1996), The International Institute of Welding
- Lee, H.W, "A Study on Metallurgical Properties and Fatigue Strength depending on Bead Height in SAW Butt Joints", Journal of the Society of Naval Architects of Korea, 35(3), pp.62~70 (1998)
- Nagai, K, "Plastic Deformation Behaviors in the Longitudinal Butt Welded Joints between High Strength Steel and Mild Steel", Journal of the Society of Naval Architects of Korea, 13(2), pp.45~51 (1976)
- Neuber, H, "Theory of Notch Stress" (1946), JW Edwards Co
- Radaj, D., "Review of fatigue strength assessment of non-welded and welded structures based on local parameters", International Journal of Fatigue, 18(3), pp.153~170 (1996)
- Raghu, O, "Thermal properties of paint coatings on different backings using a scanning photo acoustic technique", Measurement science and technology, 17(11), pp.2945~2949 (2006)