2층 철골 구조물에 설치된 무정전전원장치의 실규모 진동대 실험연구
Full-scale Shaking Table Test of Uninterruptible Power Supply Installed in 2-stories Steel Structure
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 실규모의 2층 철골 구조물에 7종의 건축 및 비건축 비구조요소를 설치하여 진동대 실험을 수행하였다. 진동대 실험은 현행 비내진상세와 면진장치를 적용한 실험으로 두 차례 수행되었으며 본 연구에서는 무정전전원장치(UPS)의 내진성능에 대하여 실험 및 분석하였다. 비내진정착상세로는 UPS 하단에 ㄷ형강 다리부가 설치되었고, 면진장치로는 고감쇠고무와 와이어로프로 구성된 개발 복합면진장치가 사용되었다. 지진하중모사를 위하여 ICC-ES AC156 (2010)에 따라 인공지진파를 생성 후, 동일 지진파의 크기를 점증하여 가진하였다. 진동대실험을 통해 복합면진장치의 적용여부에 따른 UPS의 거동 및 동적 특성(응답가속도, 응답변위, 동증폭계수, 고유진동수, 감쇠비)을 비교 및 분석하였다. 실험결과, 복합면진장치를 적용함에 따라 UPS의 고유진동수가 감소하여 응답가속도 및 증폭계수가 크게 감소하는 것으로 확인되었다.
Abstract
In this study, the shaking table tests were carried out on six types of non-structural elements installed on a full-scale two-story steel structure. The shaking table tests were performed for non-structural elements with and without seismic isolators. In this study, the seismic performance of Uninterruptible Power Supply (UPS) specimens was tested and investigated. Non-seismic details were composed of conventional channel section steel beams, and the seismic isolators were composed of high damping rubber bearing (HDRB) and wire isolator. The input acceleration time histories were artificially generated to satisfy the requirements proposed by the ICC-ES AC156 code. Based on the test results, the damage and dynamic characteristics of the UPS with the seismic isolator were investigated in terms of the natural frequency, damping ratio, acceleration time history responses, dynamic amplification factors, and relative displacements. The results from the shaking table showed that the dynamic characteristics of the UPS including the acceleration response were significantly improved when using the seismic isolator.
참고문헌 (18)
- 이승재, "무정전전원장치(UPS)의 진동대 실험 및 동적특성 분석", 대한건축학회논문집 구조계, 35(11), pp.129~136 (2019), 대한건축학회
- 김태완, "2017년 포항지진으로 피해를 입은 국내 필로티형 건물의 지진 거동", 한국지진공학회논문집, 22(3), pp.161~168 (2018), 한국지진공학회[DOI]
- Pohang Earthquake Damage Survey Report, "Korea Architectural Institute", ~ (2018)
- Ministry of the Interior and Safety, "Guidelines for Earthquake-Resistant Measures of Electric Power Communication Equipment", ~ (2018)
- Chen, M., "Design and construction of a full-scale 5-story base isolated building outfitted with nonstructural components for earthquake testing at the UCSD-NEES facility", Structures Congress 2012, pp.1349~1360 (2012)
- Furukawa, S., "Full-scale shaking table test of a base-isolated medical facility subjected to vertical motions", Earthquake Engineering &Structural Dynamics, 42(13), pp.1931~1949 (2013)
- Balaji, P. S., "Wire rope isolators for vibration isolation of equipment and structures–A review", IOP conference series: materials science and engineering, 78(1) (2015), IOP Publishing
- Leblouba, M., "Behavior of polycal wire rope isolators subjected to large lateral deformations", Engineering Structures, 191, pp.117~128 (2019)
- Leblouba, M., "Performance of wire rope isolators in the seismic protection of equipment", MATEC Web of Conferences, 120, pp.01009~ (2017), EDP Sciences
- Choun, Y. S, "A Shaking Table Test for the Effectiveness Evaluation of Seismic Isolation Systems for a Small Equipment", Journal of the Korean Society of Civil Engineers, pp.3146~3150 (2003)
- 남광식, "면진장치의 종류에 따른 변압기의 지진거동 분석", 한국산학기술학회논문지, 22(9), pp.291~300 (2021), 한국산학기술학회[DOI]
- ICC-ES., "Acceptance Criteria For Seismic Certification by Shake-Table Testing of Nonstructural Components", ICC-ES AC15, ~ (2010)
- Architectural Institute of Korea, "Korean Building Code, KDS 41 17 2019", ~ (2019)
- Japan Society of Seismic Isolation (J.S.S.I)., "Introduction to Seismic Isolation Structure", ~ (2002)
- Applied Technology Council., "Reducing the Risks of Nonstructural Earthquake Damage-A Practical Guide", FEMA E-7, ~ (2011)
- Jain, S. K., "Application of base isolation for flexible buildings", 13th World Conference on Earthquake Engineering, pp.1~6 (2004)
- Mele, E., "Inter-story isolation systems(IIS)for tall buildings : design considerations", CTBUH Journal, (2), pp.34~41 (2018)
- Irvine, T., "The half power bandwidth method for damping calculation", ~ (2005)