원전기기의 면진을 위한 진동대 실험 II : FPS
A Shaking Table Test for Equipment Isolation in the NPP (II): FPS
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는 원전기기의 내진안전성을 증가시키기 위해 면진장치를 적용한 기기의 진동대 실험을 수행하였다. 원전구조물과 유사한 진동수 특성을 가지는 실험모형을 제작하여 실험에 사용하였으며 구조물 내부의 기기를 모형화 하기 위하여 400kg의 강체를 사용하였다. 탁월주파수 특성이 상이한 3종류 지진파를 이용하여 진동대 실험을 수행하였다. 면진장치로는 마찰진자형 베어링(FPS)을 사용하였다. 입력지진의 최대가속도를 0.1g, 0.2g, 0.25g의 3단계로 변화시키면서 실험을 수행하였고 또한 1방향, 2방향 및 3방향 가진에 의한 거동을 분석하였다. 실험결과 지진파의 연직성분이 FPS의 면진성능에 영향을 미치는 것을 알 수 있었으며 펄스타입의 속도성분이 큰 근거리 지진인 경우 면진효과가 감소하는 것을 알 수 있었다.
Abstract
This paper presents the results of experimental studies on the equipment isolation effect in the nuclear containment. For this purpose, shaking table tests were performed. The purpose of this study is enhancement of seismic safety of equipment in the Nuclear Power Plant. The isolation system, known as Friction Pendulum System (FPS), combines the concepts of sliding bearings and pendulum motion was selected. Peak ground acceleration, bidirectional motion, effect of vertical motion and frequency contents of selected earthquake motions were considered. As a result, these are founded that the vertical motion of seismic wave affect to the base isolation and the isolation effect decreased in case of near fault earthquake motion.
참고문헌 (11)
- "원전기기의 지진력 저감이 노심손상빈도에 미치는 영향 평가" (2002)
- "Experimental and Analytical Study of Base-Isolation for Electric Power Equipments" (2001)
- "Design Response Spectra for Seismic Design of Nuclear Power Plants" (1973)
- "Feasi- bility and Performance Studies on Improving the Earthquake Resistance of New and Existing Buildings Using the Friction Pendulum System University of California" (1989)
- "Analytical and Experimental Seismic Studies of Transformers Isolated with Friction Pendulum System and Design Aspects", 17(4), pp.569~595 (2001)
- "마찰진자형 면진베어링의 특성연구" (2000)
- "FPS 면진장치의 기계적 특성에 관한 실험적 평가" (2003)
- "적층고무베어링과 납-고무베어링의 내진성능에 관한 실험적 평가", 2(4), pp.53~62 (1998)
- "교량에 설치된 마찰 단진자 시스템의 지진하중에 의한 거동연구", 2(2), pp.13~22 (1998)
- "교량의 마찰형 지진격리장치 최적 인자 결정에 관한 연구" (2002)
- "원전기기의 면진을 위한 진동대 실험 I" (2004)
