섬유(Fiber)요소와 비선형 전단스프링을 적용한 고축력을 받는 철근콘크리트 전단벽의 비선형거동 분석
Pushover Analysis of Reinforced Concrete Shear Wall Subjected to High Axial Load Using Fiber Slices and Inelastic Shear Spring
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Reinforced concrete shear walls are effective for resisting lateral loads imposed by wind or earthquakes. Observed damages of the shear wall in recent earthquakes in Chile(2010) and New Zealand(2011) exceeded expectations. Various analytical models have been proposed in order to incorporate such response features in predicting the inelastic response of RC shear walls. However, the model has not been implemented into widely available computer programs, and has not been sufficiently calibrated with and validated against extensive experimental data at both local and global response levels. In this study, reinforced concrete shear walls were modeled with fiber slices, where cross section and reinforcement details of shear walls can be arranged freely. Nonlinear analysis was performed by adding nonlinear shear spring elements that can represent shear deformation. This analysis result will be compared with the existing experiment results. To investigate the nonlinear behavior of reinforced concrete shear walls, reinforced concrete single shear walls with rectangular wall cross section were selected. The analysis results showed that the yield strength of the shear wall was approximately the same value as the experimental results. However, the yielding displacement of the shear wall was still higher in the experiment than the analysis. The analytical model used in this study is available for the analysis of shear wall subjected to high axial forces.
Abstract
Reinforced concrete shear walls are effective for resisting lateral loads imposed by wind or earthquakes. Observed damages of the shear wall in recent earthquakes in Chile(2010) and New Zealand(2011) exceeded expectations. Various analytical models have been proposed in order to incorporate such response features in predicting the inelastic response of RC shear walls. However, the model has not been implemented into widely available computer programs, and has not been sufficiently calibrated with and validated against extensive experimental data at both local and global response levels. In this study, reinforced concrete shear walls were modeled with fiber slices, where cross section and reinforcement details of shear walls can be arranged freely. Nonlinear analysis was performed by adding nonlinear shear spring elements that can represent shear deformation. This analysis result will be compared with the existing experiment results. To investigate the nonlinear behavior of reinforced concrete shear walls, reinforced concrete single shear walls with rectangular wall cross section were selected. The analysis results showed that the yield strength of the shear wall was approximately the same value as the experimental results. However, the yielding displacement of the shear wall was still higher in the experiment than the analysis. The analytical model used in this study is available for the analysis of shear wall subjected to high axial forces.
참고문헌 (18)
- Wallace JW, "Behavior. Design, and Modeling of Structural Walls and Coupling Beams-Lessons from Recent Laboratory Tests and Earthquakes", International Journal of Concrete Structures and Mechanics, 6(1), pp.3~18 (2012)
- Matsumoto K, "Modeling of a Wall Member in a Non-linear Frame Analysis", Architectural Institute of Japan. Journal of Structural Engineering, 39B, pp.245~254 (1993)
- Linde P., "Numerical Modeling and Capacity Design of Eartquake-Resistant Reinforced Concrete Walls", 236~ (1993)
- Vulcano A, "Analytical Modeling of R", C Structural Walls, 1988, 41~46
- Milev JI., "Two Dimensional Analytical Model of Reinforced Concrete Shear Walls", Proc. 11WCEE (1996)
- 김동관, "철근콘크리트 벽체의 비선형해석을 위한 거시 모델", 콘크리트학회 논문집, 23(5), pp.569~579 (2011), 한국콘크리트학회
- Park HG, "Truss model for nonlinear Analysis of RC Members subject to Cyclic Loading", Journal of Structural Engineering, ASCE, 133(10), pp.1351~1363 (2007)
- 김용준, "등가 기둥 모델을 이용한 철근콘크리트 전단벽-골조 구조물의 푸쉬오버 해석", 한국지진공학회논문집, 18(1), pp.53~61 (2014), 한국지진공학회
- 윤성준, "특수 및 준특수 상세에 따른 철근콘크리트 전단벽의 비선형 내진거동 해석", 한국지진공학회논문집, 17(1), pp.43~51 (2013), 한국지진공학회
- 신지욱, "거시적 모델을 다르게 고려한 철근콘크리트 벽체의 비선형 해석 연구", 한국지진공학회논문집, 16(5), pp.1~11 (2012), 한국지진공학회
- Seol MC, "Nonlinear Analysis of Reinforced Concrete Shear Wall Using Fiber Model", Master, pp.2004
- Zhang Y, "Seismic Behavior of Reinforced Concrete Shear Walls Subjected to High Axial Loading", ACI Structural Journal, 97(5), pp.739~750 (2000)
- "ASCE", SEI 41-06. Seismic Rehabilitation of Existing Buildings, 2007
- Paulay T, "Seismic Design of Reinforced Concrete and Masonry Buildings", pp.744~ (1991), John Wiley&Sons
- Li KN., "3-Dimensional Nonlinear Static", Dynamic Structural Analysis Computer Program Package-Users Manual, 2010
- Krolicki J, "Shear Strength of Reinforced Concrete Walls Subjected to Cyclic Loading", Journal of Earthquake Engineering, 15(S1), pp.30~71 (2011)
- PEER, "ATC-72-1. Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings-Task7 Report for Tall Buildings Initiative", 2010
- Englekirk RE., "Seismic Design of Reinforced and Precast Concrete Buildings", pp.825~ (2003), John Wiley&Sons