2014년 JCOMM 해수 염분 측정 국제 상호비교실험 결과 보고
Summary of 2014 JCOMM Pilot Inter-Comparison Project for Seawater Salinity Measurements
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The inter-comparison project for seawater salinity measurements, in which 25 laboratories from 16 countries took part, was conducted by JCOMM (Joint WMO/IOC Technical Commission for Oceanography and Marine Meteorology) for the first time in 2014. Two seawater samples of different salinity values ranging from 30−35 and 20−25 for Sample A and Sample B respectively and which had sufficient homogeneity and stability were distributed to all participants. Participants measured the salinity in their own laboratories at least 3 times and reported the results. Statistical treatments were applied to the results to assess discrepancies among laboratories. 20 out of the 25 laboratories used laboratory salinometers and statistics for this group were denoted as belonging to group α; while 5 out of the 25 laboratories used hand-held measuring instruments and statistics for this group were denoted as belonging to group β. Bias described as discrepancy among laboratories in group α was within ± 0.001 and expanded uncertainty (k = 2) was in the vicinity of 0.002. The bias and the uncertainty of Korea Institute of Ocean Science and Technology (KIOST), in group α, were 0.000 and 0.002, respectively. The biases of group β were greater than group α because of constraints related to instrument accuracy. Biases from 3 laboratories in group β exceed the accuracy specification of the corresponding instruments. Considering that the uncertainty of Standard Seawater (SSW) is of the order 0.001 to 0.002, the inter-comparison results show that 16 laboratories among the 25 laboratories made high quality measurements, largely indistinguishable from one another.
Abstract
The inter-comparison project for seawater salinity measurements, in which 25 laboratories from 16 countries took part, was conducted by JCOMM (Joint WMO/IOC Technical Commission for Oceanography and Marine Meteorology) for the first time in 2014. Two seawater samples of different salinity values ranging from 30−35 and 20−25 for Sample A and Sample B respectively and which had sufficient homogeneity and stability were distributed to all participants. Participants measured the salinity in their own laboratories at least 3 times and reported the results. Statistical treatments were applied to the results to assess discrepancies among laboratories. 20 out of the 25 laboratories used laboratory salinometers and statistics for this group were denoted as belonging to group α; while 5 out of the 25 laboratories used hand-held measuring instruments and statistics for this group were denoted as belonging to group β. Bias described as discrepancy among laboratories in group α was within ± 0.001 and expanded uncertainty (k = 2) was in the vicinity of 0.002. The bias and the uncertainty of Korea Institute of Ocean Science and Technology (KIOST), in group α, were 0.000 and 0.002, respectively. The biases of group β were greater than group α because of constraints related to instrument accuracy. Biases from 3 laboratories in group β exceed the accuracy specification of the corresponding instruments. Considering that the uncertainty of Standard Seawater (SSW) is of the order 0.001 to 0.002, the inter-comparison results show that 16 laboratories among the 25 laboratories made high quality measurements, largely indistinguishable from one another.
참고문헌 (17)
- 김성대, "연구사업 해양자료 관리를 위한 표준화와 해양물리자료 표준(안)", Ocean and Polar Research, 37(4), pp.249~263 (2015), 한국해양과학기술원[DOI]
- 노태근, "자연해수를 이용한 해수 중 영양염 분석용 표준물질 개발", 바다, 20(1), pp.29~35 (2015), 한국해양학회
- 문초롱, "2010년 국내 해수 중 영양염 분석 실험실간 상호비교실험 연구", 바다, 20(1), pp.63~70 (2015), 한국해양학회
- 이정한, "CTD 교정과 불확도 평가", Ocean and Polar Research, 36(1), pp.77~85 (2014), 한국해양과학기술원[DOI]
- 중국 해양표준화"12. 5"발전계획, "주현희", 한국해양과학기술원, 73~ (2013)
- Bacon S, "IAPSO standard seawater : definition of the uncertainty in the calibration procedure and stability of recent batches", J Atmos Ocean Tech, 24(10), pp.1785~1799 (2007)
- BIPM, "Evaluation of measurement data – guide to the expression of uncertainty in measurement GUM 1995 with minor corrections", JCGM, 100, pp.134~ (2008)
- BIPM, "Evaluation of measurement data – supplement 1 to the guide to the expression of uncertainty in measurement – propagation of distributions using a Monte Carlo method", JCGM, 101, pp.90~ (2008)
- Culkin F, "Stability of IAPSO standard seawater", J Atmos Ocean Tech, 15(4), pp.1072~1075 (1998)
- Dux JP, "Handbook of quality assurance for the analytical chemistry laboratory", pp.203~ (1990), Van Nostrand Reinhold
- ISO, "Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method", ISO 5725-2, 42~ (1994)
- ISO, "Statistical methods for use in proficiency testing by interlaboratory comparisons", ISO NF 13528:2005, 66~ (2005)
- ISO, "Reference materials – general and statistical principles for certification", ISO 35:2006, 64~ (2006)
- Lewis EL., "The practical salinity scale 1978 and its antecedents", IEEE J Oceanic Eng, 5(1), pp.3~8 (1980)
- Le Menn M., "About uncertainties in practical salinity calculations", Ocean Sci, 7(5), pp.651~659 (2011)
- Perkin RG, "The practical salinity scale 1978 : fitting the data", IEEE J Oceanic Eng, 5(1), pp.9~16 (1980)
- Taylor JK, "Quality assurance of chemical measurements", pp.328~ (1987), Lewis Publishers