초음파 도플러 유속계 교정 시설 현황
Analysis of Calibration Facilities for Acoustic Doppler Current Profilers(ADCPs)
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Despite technological developments and application advances of Acoustic Doppler Current Profilers (ADCPs), no standard procedure has been adopted or accepted for calibration of ADCPs. Limitations of existing facilities for calibrating ADCPs, the complexity of ADCP instruments, and rapid changes in ADCP technology are some of the reasons why a standard procedure has not been adopted. However, there is increasing realization of the need for effective Quality Assurance (QA) and as part of that the importance of standardized calibration. In this study, the significance of calibration and QA plans for ADCPs is discussed and the calibration facilities for ADCPs at home and abroad are reported. Furthermore, the method for calibrating ADCPs using a towed car and its limitations are discussed. This study contributes to discussions surrounding the establishment of standard procedures for calibrating ADCPs and QA plans, and the construction of calibration facilities in the future.
Abstract
Despite technological developments and application advances of Acoustic Doppler Current Profilers (ADCPs), no standard procedure has been adopted or accepted for calibration of ADCPs. Limitations of existing facilities for calibrating ADCPs, the complexity of ADCP instruments, and rapid changes in ADCP technology are some of the reasons why a standard procedure has not been adopted. However, there is increasing realization of the need for effective Quality Assurance (QA) and as part of that the importance of standardized calibration. In this study, the significance of calibration and QA plans for ADCPs is discussed and the calibration facilities for ADCPs at home and abroad are reported. Furthermore, the method for calibrating ADCPs using a towed car and its limitations are discussed. This study contributes to discussions surrounding the establishment of standard procedures for calibrating ADCPs and QA plans, and the construction of calibration facilities in the future.
참고문헌 (22)
- "하천설계기준 및 해설 제 7장 7.4.2 유속계의 검정"[URL]
- "수문관측업무규정 훈령 제47호 11조 3항"[URL]
- 김응석, "회전식유속계와 ADCP를 이용한 유속측정의 검증 및 적용", 한국방재학회논문집, 9(3), pp.101~106 (2009), 한국방재학회
- "국가교정기관지정제도운영요령 제 41조 측정기기의 교정대상 및 주기"[URL]
- 해양조사장비 성능검사방안연구, "해양수산부", 국립해양조사원, 93~, pp.11-1520290-000118-01 (2005)
- "Standard operating procedures for calibration, preparation, and deployment of teledyne RD instruments acoustic doppler current profilers (ADCPs) © (RDI)"[URL]
- Appell G, "Calibration of acoustic dopple current profiles", Oceans '88. A partnership of marine interest, pp.346~352 (1988)
- Acoustic doppler current profiling measurements and navigation, "Firing E", WOCE Report, 24~, pp.WHP office report WHP091-1 (1991)
- Firing E, "Shipboard ADCP measurements In: The go-ship repeat hydrography manual: a collection of expert reports and guidelines", pp.1~11 (2010), ICPO publication
- Gilcoto M, "Robust estimations of current velocities with four-beam broadband ADCPs", J Atmos Ocean Tech, 26(12), pp.2642~2654 (2009)
- ISO, "Hydrometry-Calibration of current meters in straight open tanks", pp.2007, DIS
- Joyce TM, "On in situ “calibration” of shipboard ADCPs", J Atmos Ocean Tech, 6, pp.169~172 (1989)[DOI]
- Marsden RF, "A method for correcting vertical velocities measured from a vessel-mounted acoustic doppler current profiler", J Atmos Ocean Tech, 14(6), pp.1533~1538 (1997)
- Marsden RF, "Correcting for beam spread in acoustic doppler current profiler measurements", J Atmos Ocean Tech, 21(9), pp.1491~1498 (2004)
- Munchow A, "Performance and calibration of an acoustic doppler current profiler towed below the surface", J Atmos Ocean Tech, 12(2), pp.435~444 (1995)
- Oberg K, "In search of easy-to-use methods for calibrating ADCP’s for velocity and discharge measurements", Hydraulic measurements and experimental methods 2002, pp.1~11 (2002), American Society of Civil Engineers
- Pollard R, "A method for calibrating shipmounted acoustic doppler profilers and the limitations of gyro compasses", J Atmos Ocean Tech, 6(6), pp.859~865 (1989)
- Shih H, "Towing basin speed calibration of acoustic doppler current profiling instruments", Joint conference on water resources engineering and water resources planning and management, pp.1~10 (2000), ASCE
- TELEDYNE RD INSTRUMENTS, "Acoustic doppler current profilers principles of operation: a practical prim", TELEDYNE RD INSTRUMENTS, 56~ (1993)
- TELEDYNE RD INSTRUMENTS, "ADCP coordinate transformation : formulas and calculations", TELEDYNE RD INSTRUMENTS, 32~ (2010)
- Trump CL, "Calibrating a gyrocompass using ADCP and DGPS data", J Atmos Ocean Tech, 14(1), pp.211~214 (1997)
- Quality-assurance plan for discharge measurements using acoustic doppler current profilers, "USGS", USGS, 46~, pp.2005-5183 (2005)