고주파유도가열 연소합성에 의한 나노구조 ReSi1.75 제조 및 기계적 성질
Mechanical Properties and Fabrication of Nanostructured ReSi1.75 by High Frequency Induction Heated Combustion Synthesis
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Nanostructured ReSi1.75 was synthesized to have high density via rapid and cost effective process named as high-frequency induction heated combustion synthesis (HFIHCS) method. For the process, mechanically activated Re-Si powder was used, which had been prepared by mechanical ball milling of Re and Si powders with mixing ratio of 1:1.75. Both combustion synthesis and densification were accomplished simultaneously by applying electric current and mechanical pressure of 80 MPa during the process. The average grain size, hardness, and fracture toughness of the compound were 210 ㎚, 1085 ㎏/㎟ and 4 MPa·m1/2, respectively. The experimental results show that HFIHCS is a promising process for synthesis of nanostructured ReSi1.75 which has a potential for both high temperature and thermo-electric applications.
Abstract
Nanostructured ReSi1.75 was synthesized to have high density via rapid and cost effective process named as high-frequency induction heated combustion synthesis (HFIHCS) method. For the process, mechanically activated Re-Si powder was used, which had been prepared by mechanical ball milling of Re and Si powders with mixing ratio of 1:1.75. Both combustion synthesis and densification were accomplished simultaneously by applying electric current and mechanical pressure of 80 MPa during the process. The average grain size, hardness, and fracture toughness of the compound were 210 ㎚, 1085 ㎏/㎟ and 4 MPa·m1/2, respectively. The experimental results show that HFIHCS is a promising process for synthesis of nanostructured ReSi1.75 which has a potential for both high temperature and thermo-electric applications.
참고문헌 (22)
- J. Milne, "Instant Heat" (1985), Kinetic Metals Inc.
- Y. S. Touloukian, "Thermal Conductivity", pp.1970, IFI
- A. Heinrich, , Thin solid films, 381, pp.287~ (2001)
- K. Kurokawa, , Vacuum, 65, pp.497~ (2002)
- V. S. Nesphor, , Phys. Met. Metallogr, 11, pp.146~ (1960)
- U. Gottlieb, , J appl Phys., 78, pp.3902~ (1995)
- K. Kuwabara, , Intermetallic, 10, pp.129~ (2002)
- H. Gleiter, , Nanostruct. Mater., 6, pp.3~ (1995)
- J. Karch, , Nature, 330, pp.556~ (2002)
- A. M. George, , Nature, 413, pp.54~ (2001)
- D. Hreniak, , J. Alloys Compd., 341, pp.183~ (2002)
- C. Xu, , Sens. Actuators B, 3, pp.147~ (1991)
- D. G. Lamas, , J. Magn. Mater., 241, pp.207~ (2002)
- E. S. Ahn, , Nano Lett., 1, pp.149~ (2001)
- Z. Fang, , Int. J. of Refractory Met. & Hard Mater., 13, pp.297~ (1995)
- A. I. Y. Tok, , Mat. Sci. Eng. A, 383, pp.234~ (2004)
- I. J. Shon, , Mater. Sci. For., 통권 : 534, pp.525~ (2007)
- M. Sommer, , Int. J. of Refractory Met. & Hard Mat., 20, pp.41~ (2002)
- I.-J. Shon, , Scripta Matere., 56, pp.665~ (2007)
- C. Suryanarayana, "X-ray Diffraction A Practical Approach", pp.213~ (1998), Plenum Press
- D. Y. Oh, , J. Alloys & Compd., 395, pp.174~ (2005)
- K. Niihara, , J. Mater. Sci. Lett., 1, pp.12~ (1982)