Enhanced mechanical properties of nanostructured TiSi2-NbSi2 composite rapidly sintered by pulsed current activated heating
0
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Despite of many attractive properties, the low fracture toughness of refractory metal silicides limits their wide application. One of the most obvious tactics to improve the mechanical properties has been to make fabrication of a nanostructured material and composite material. Nanopowders of Ti, Nb, and Si were fabricated by high-energy ball milling. A dense nanostructured TiSi2-NbSi2 composite was simultaneously synthesized and sintered by the pulsed current activated sintering method within three minutes using mechanically activated powders of Ti, Nb, and Si. A high-density TiSi2-NbSi2 composite was produced under simultaneous application of an 80-MPa pressure and a pulsed current. The hardness and fracture toughness of the nanostructured TiSi2-NbSi2 compositewere higher than those of monolithic TiSi2 or NbSi2. This is believed to suggest that TiSi2 and NbSi2 in the composite may deter the propagation of cracks and TiSi2 and NbSi2 have a nanocrystalline.
Abstract
Despite of many attractive properties, the low fracture toughness of refractory metal silicides limits their wide application. One of the most obvious tactics to improve the mechanical properties has been to make fabrication of a nanostructured material and composite material. Nanopowders of Ti, Nb, and Si were fabricated by high-energy ball milling. A dense nanostructured TiSi2-NbSi2 composite was simultaneously synthesized and sintered by the pulsed current activated sintering method within three minutes using mechanically activated powders of Ti, Nb, and Si. A high-density TiSi2-NbSi2 composite was produced under simultaneous application of an 80-MPa pressure and a pulsed current. The hardness and fracture toughness of the nanostructured TiSi2-NbSi2 compositewere higher than those of monolithic TiSi2 or NbSi2. This is believed to suggest that TiSi2 and NbSi2 in the composite may deter the propagation of cracks and TiSi2 and NbSi2 have a nanocrystalline.
참고문헌 (27)
- N. S. Stoloff, , Mater. Sci. Eng. A, 261, pp.169~180 (1999)
- A. K. Vasudevan, , Mater. Sci. Eng. A, 155, pp.259~266 (1992)
- G.J. Fan, , Scripta Mater, 41, pp.1147~1151 (1999)
- M. E. Schlesinger, , Chem Rev, 90, pp.607~628 (1990)
- A. K. Vasudevan, , Mater Sci Eng. A, 155, pp.1~17 (1992)
- Byung-Ryang Kim, "Rapid synthesis and consolidation of TiSi2 by pulsed current activated combustion", Journal of Ceramic Processing Research, 10(2), pp.171~175 (2009), 세라믹공정연구센터
- 김병량, "High-Frequency Induction-Heated Combustion Synthesisand Consolidation of Nanostructured NbSi₂ from Mechanically Activated Powders", 한국분말야금학회지, 15(4), pp.279~284 (2008), 한국분말야금학회
- 손인진, "Mechanochemical Synthesis and Rapid Consolidation of Binderless Nanostructured (Ti,V)C by Pulsed Current Activated Heating and Its Mechanical Properties", 대한금속·재료학회지, 52(5), pp.343~346 (2014), 대한금속·재료학회
- Y. Ohya, , J Am Ceram Soc, 75, pp.2479~2483 (1992)
- S. K. Bhaumik, , J Mater Sci Eng. A, 279, pp.275~281 (2000)
- 이건우, "고 에너지 볼 밀링이 알루미나 소결과 기계적 성질에 미치는 영향", 대한금속·재료학회지, 51(2), pp.95~100 (2013), 대한금속·재료학회[DOI]
- 곽승미, "볼 밀링한 분말의 펄스전류활성 소결에 의한 나노구조의 지르코니아 제조와 기계적 성질", 대한금속·재료학회지, 51(5), pp.341~348 (2013), 대한금속·재료학회[DOI]
- 박나라, "NiAl3 첨가가 (W,Ti)C 초경재료 소결 및 기계적 성질에 미치는 영향", 대한금속·재료학회지, 51(10), pp.753~759 (2013), 대한금속·재료학회[DOI]
- F. Charlot, , Mater. Sci. Eng. A, 262, pp.279~287 (1999)
- In-Jin Shon, "Consolidation and mechanical properties of ultra fine WC-5 wt.% carbides hard materials by a rapid sintering method", Journal of Ceramic Processing Research, 14(5), pp.641~647 (2013), 세라믹공정연구센터[DOI]
- M. K. Beyer, , Chem. Rev, 105, pp.2921~2948 (2005)
- 두송이, "펄스 전류 가열에 의한 나노구조 MgTiO3-MgTi2O5-MgAl2O4 복합재료 합성과 동시 소결 및 기계적 성질", 대한금속·재료학회지, 51(8), pp.579~584 (2013), 대한금속·재료학회[DOI]
- 손인진, "Properties and Pulsed Current Activated Consolidation of Nanostuctured MgSiO3-MgAl2O4 Composites", Metals and Materials International, 19(5), pp.1041~1045 (2013), 대한금속·재료학회[DOI]
- 손인진, "펄스전류 활성 소결에 관한 연구", 대한금속·재료학회지, 52(8), pp.573~580 (2014), 대한금속·재료학회
- C. Suryanarayana, "X-ray Diffraction A Practical Approach" (1998), Plenum Press
- Z. Shen, , J. Am. Ceram. Soc, 85, pp.1921~1927 (2002)
- J. E. Garay, , Appl. Phys. Lett, 85, pp.573~575 (2004)
- J. R. Friedman, , Intermetallics, 12, pp.589~597 (2004)
- J. E. Garay, , Acta Mater, 51, pp.4487~4495 (2003)
- G. R. Anstis, , J. Am. Ceram. Soc, 64, pp.533~538 (1981)
- Dalibor Vojt ch, , Materials Science and Engineering A, 361, pp.50~57 (2003)
- F. CHU, , Acta mater, 44(8), pp.3035~3048 (1996)