고압비틀림 공정을 통한 급속응고 MgZn4.3Y0.7 합금 분말의 치밀화 및 기계적 거동
Consolidation and Mechanical Behavior of Gas Atomized MgZn4.3Y0.7 Alloy Powders using High Pressure Torsion
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In this paper, rapid solidified Mg-4.3Zn-0.7Y (at.%) alloy powders were prepared using an inert gas atomizer, followed by a severe plastic deformation technique of high pressure torsion (HPT) for consolidation of the powders. The gas atomized powders were almost spherical in shape, and grain size was as fine as less than 5 μm due to rapid solidification. Plastic deformation responses during HPT were simulated using the finite element method, which shows in good agreement with the analytical solutions of a strain expression in torsion. Varying the HPT processing temperature from ambient to 473 K, the behavior of powder consolidation, matrix microstructural evolution and mechanical properties of the compacts was investigated. The gas atomized powders were deformed plastically as well as fully densified, resulting in effective grain size refinements and enhanced microhardness values.
Abstract
In this paper, rapid solidified Mg-4.3Zn-0.7Y (at.%) alloy powders were prepared using an inert gas atomizer, followed by a severe plastic deformation technique of high pressure torsion (HPT) for consolidation of the powders. The gas atomized powders were almost spherical in shape, and grain size was as fine as less than 5 μm due to rapid solidification. Plastic deformation responses during HPT were simulated using the finite element method, which shows in good agreement with the analytical solutions of a strain expression in torsion. Varying the HPT processing temperature from ambient to 473 K, the behavior of powder consolidation, matrix microstructural evolution and mechanical properties of the compacts was investigated. The gas atomized powders were deformed plastically as well as fully densified, resulting in effective grain size refinements and enhanced microhardness values.
참고문헌 (33)
- E. Abe, , Acta Mater, 50, pp.3845~ (2002)
- 권기태, "AZ31 마그네슘 판재의 더블 싱크형 딥드로잉 공정의 성형성에 관한 실험적 연구", 소성가공, 17(8), pp.586~593 (2008), 한국소성가공학회
- 김세호, "AZ31B 합금판재 성형관련 기초물성 실험 및 해석 연구", 소성가공, 17(7), pp.466~472 (2008), 한국소성가공학회
- 이명한, "마그네슘 합금 판재의 온간 성형 해석에서 FLD를 이용한 성형성 평가", 소성가공, 17(7), pp.501~506 (2008), 한국소성가공학회
- 박진기, "인크리멘탈 성형을 이용한 마그네슘 합금 판재의 성형변수에 관한 연구", 소성가공, 17(6), pp.412~419 (2008), 한국소성가공학회
- 고영건, "플라즈마 전해산화 처리된 마그네슘 합금의 표면 물성에 미치는 후-열처리 온도의 영향", 소성가공, 18(8), pp.625~632 (2009), 한국소성가공학회
- 이용신, "구리-타이타늄 복합선재의 번들압출 성형특성", 소성가공, 18(4), pp.342~346 (2009), 한국소성가공학회
- 정진호, "AZ31 합금 판재의 변형모드에 따른 성형한계에 관한 연구", 소성가공, 17(7), pp.473~480 (2008), 한국소성가공학회
- 김상우, "AZ31합금 판재의 온간 점진 성형에 관한 연구", 소성가공, 17(5), pp.373~379 (2008), 한국소성가공학회
- J. Cai, , J.Alloy. Comp, 422, pp.92~ (2006)
- M. Suzuki, , Scripta Mater, 48, pp.997~ (2003)
- S. M. He, , J. Alloys Compd, 427, pp.316~ (2007)
- J. Zhang, , J. Alloys Compd, 471, pp.322~ (2009)
- Y. Kawamura, , Mater Trans, 42, pp.1301~ (2001)
- D. H. Bae, , Mater. Trans, 42, pp.2144~ (2001)
- S.-Y. Chang, , Mater. Trans, 45, pp.488~ (2004)
- S. R. Agnew, , Scripta Mater, 50, pp.377~ (2004)
- D. W. Brown, , Mater. Sci. Eng.A, 399통권 : 1 (2005)
- J. Cai, , J.Alloy. Comp, 422, pp.92~ (2006)
- M. Nishida, , Mater.Sci. Eng. A, 1217, pp.375~377 (2004)
- E. W. Wong, , Science, 277, pp.1971~ (1997)
- A. Manedov, , Nature Mater, 1, pp.190~ (2002)
- E. T. Thostenson, , Compos.Sci. Technol, 61, pp.1899~ (2001)
- 안종관, "무전해 니켈 도금법으로 제조된 니켈-다이아몬드 복합분체의 특성", 한국분말야금학회지, 11(3), pp.233~241 (2004), 한국분말야금학회
- H. S. Kim, , Mater. Trans, 45, pp.1809~ (2004)
- J. Robertson, , J. Non-Cryst. Solids, 317, pp.114~ (2003)
- S. C. Yoon, , Mater. Sci. Forum, 221, pp.503~504 (2006)
- E. W. Wong, , Science, 277, pp.1971~ (1997)
- A. Manedov, , Nature Mater, 1, pp.190~ (2002)
- S. J. Hong, , Mater. Sci. and Eng. A, 271, pp.469~ (1999)
- H. S. Kim, , Mater. Sci. Eng. A, 315, pp.122~ (2001)
- B. S. Moon, , Scripta Mater, 46, pp.131~ (2002)
- T.-S. Kim, (2010), J. Alloys Compd