급속응고 Mg 합금분말의 제조 및 동적성형특성
Fabrication and Dynamic Consolidation Behaviors of Rapidly Solidified Mg Alloy Powders
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In order to improve the weak mechanical properties of cast Mg alloys, Mg-Zn_1Y_2 (at%) alloy powders were synthesized using gas atomization, a typical rapid solidification process. The powders consist of fine dendrite structures less than 3 μm in arm spacing. In order to fabricate a bulk form, the Mg powders were compacted using magnetic pulse compaction (MPC) under various processing parameters of pressure and temperature. The effects of the processing parameters on the microstructure and mechanical properties were systematically investigated.
Abstract
In order to improve the weak mechanical properties of cast Mg alloys, Mg-Zn_1Y_2 (at%) alloy powders were synthesized using gas atomization, a typical rapid solidification process. The powders consist of fine dendrite structures less than 3 μm in arm spacing. In order to fabricate a bulk form, the Mg powders were compacted using magnetic pulse compaction (MPC) under various processing parameters of pressure and temperature. The effects of the processing parameters on the microstructure and mechanical properties were systematically investigated.
참고문헌 (7)
- A. Suzuki, , Acta Mater, 53, pp.2823~ (2005)
- H. J. Chae, "Extrusion behavior of high strength Magnesium alloy powders", 석사, pp.2008
- 채홍준, "가스분무 Mg-Zn-Y 합금분말 및 압출재의 특성", 한국분말야금학회지, 13(6), pp.427~431 (2006), 한국분말야금학회
- 채홍준, "가스분무 Mg-Zn-Y 합금분말의 압출거동", 한국분말야금학회지, 14(4), pp.251~255 (2007), 한국분말야금학회
- G. H. Lee, , Met. Mater. Int, 9, pp.379~ (2003)
- 이근희, "Magnetic Pulsed Compaction(MPC)법으로 성형된 Cu 나노 분말 성형체의 미세구조 및 기계적 특성", 한국분말야금학회지, 9(2), pp.124~132 (2002), 한국분말야금학회
- R. A. Andrievski, , J. powder Met, 30, pp.59~ (1994)