레이저 클래딩법을 이용한 AISI 316L 스테인리스강 내 Y2O3입자의 분산거동
Dispersion Behaviors of Y2O3 Particles Into Aisi 316L Stainless Steel by Using Laser Cladding Technology
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The present work investigated the dispersion behavior of Y2O3 particles into AISI 316L SS manufactured using laser cladding technology. The starting particles were produced by high energy ball milling in 10 min for prealloying,which has a trapping effect and homogeneous dispersion of Y2O3 particles, followed by laser cladding using CO2 laser source. The phase and crystal structures of the cladded alloys were examined by XRD, and the cross section was characterized using SEM. The detailed microstructure was also studied through FE-TEM. The results clearly indicated that as the amount of Y2O3 increased, micro-sized defects consisted of coarse Y2O3 were increased. It was also revealed that homogeneously distributed spherical precipitates were amorphous silicon oxides containing yttrium. This study represents much to a new technology for the manufacture and maintenance of ODS alloys.
Abstract
The present work investigated the dispersion behavior of Y2O3 particles into AISI 316L SS manufactured using laser cladding technology. The starting particles were produced by high energy ball milling in 10 min for prealloying,which has a trapping effect and homogeneous dispersion of Y2O3 particles, followed by laser cladding using CO2 laser source. The phase and crystal structures of the cladded alloys were examined by XRD, and the cross section was characterized using SEM. The detailed microstructure was also studied through FE-TEM. The results clearly indicated that as the amount of Y2O3 increased, micro-sized defects consisted of coarse Y2O3 were increased. It was also revealed that homogeneously distributed spherical precipitates were amorphous silicon oxides containing yttrium. This study represents much to a new technology for the manufacture and maintenance of ODS alloys.
참고문헌 (17)
- ‘Laser surface cladding a literature survey’ Technical Report, "H. Gedda", ~ (2000)
- 강남현, "레이저클래딩기술(오버레이용접법)", 대한용접접합학회지, 25(1), pp.7~8 (2007), 대한용접접합학회
- Z. Chen., , J. . Mater. Proc. Tech, 62, pp.321~ (1996)
- P. D. Denney., , Naval Engineers J., pp.69~ (1993)
- 장윤상, "재제조를 위한 레이저 직접 금속조형 공정의 생산성 및 환경영향의 평가", 청정기술, 13(3), pp.226~232 (2007), 한국청정기술학회
- C. P. Paul., , Optics and Lasers in Eng, 44, pp.1096~1109 (2006)
- G. Bi., , Int. J. Machine Tools & Manufacture, 47, pp.555~561 (2007)
- U. Oliveira., , Surf. Coat. Technol, 197, pp.127~ (2005)
- D. Vallauri., , J. Euro Ceramic Soc, 28, pp.1697~1713 (2008)
- B. S. Du., , Scr. Mater, 59, pp.1147~1150 (2008)
- X. H. Wang., , Trans. Nonferrous Met. Soc, 23, pp.1689~ (2013)
- K. L. Wang., , Appl. Surf. Sci, 174, pp.191~ (2001)
- 홍성모, "기계적 밀링 공정에 의해 제조된 Al-B4C 복합분말의 밀링 거동 연구", 한국분말야금학회지, 19(4), pp.291~296 (2012), 한국분말야금학회[DOI]
- D. Bergstrom., , Appl. Surf. Sci, 253, pp.5017~5028 (2007)
- 김민호, "산화물 분산강화형 316L 스테인리스강의 제조와 특성 연구", 한국분말야금학회지, 16(2), pp.122~130 (2009), 한국분말야금학회
- K. Ishizaki, , Acta Matall. Mater, 38, pp.2059~2066 (1990)
- J. H. E. Jeffes, , Encyclopedia of materiaks, Sci. Tech 2nd edition, 275, pp.1~2753 (2001)