슬러리 코팅 공정으로 제조된 Fe 폼의 기공 특성에 미치는바인더 함량의 영향
The Effect of Binder Content for the Pore Properties of Fe Foam Fabricated by Slurry Coating Process
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Fe foam with above 90% porosity and 2 millimeter pore size was successfully fabricated by a slurry coating process. In this study, the binder contents were controlled to produce the Fe foam with different pore size, strut thickness and porosity. Firstly, the slurry was prepared by uniform mixing with Fe powders, distilled water and polyvinyl alcohol(PVA) as initial materials. After slurry coating on the polyurethane(PU) foam the sample was dried at 80oC. The PVA and PU foams were then removed by heating at 700oC for 3 hours. The debinded samples were subsequently sintered at 1250oC with holding time of 3 hours under hydrogen atmosphere. The three dimensional geometries of the obtained Fe foams with open cell structure were investigated using X-ray micro CT(computed tomography)as well as the pore morphology, size and phase.
Abstract
Fe foam with above 90% porosity and 2 millimeter pore size was successfully fabricated by a slurry coating process. In this study, the binder contents were controlled to produce the Fe foam with different pore size, strut thickness and porosity. Firstly, the slurry was prepared by uniform mixing with Fe powders, distilled water and polyvinyl alcohol(PVA) as initial materials. After slurry coating on the polyurethane(PU) foam the sample was dried at 80oC. The PVA and PU foams were then removed by heating at 700oC for 3 hours. The debinded samples were subsequently sintered at 1250oC with holding time of 3 hours under hydrogen atmosphere. The three dimensional geometries of the obtained Fe foams with open cell structure were investigated using X-ray micro CT(computed tomography)as well as the pore morphology, size and phase.
참고문헌 (15)
- M. German., "Powder Metallurgy of Iron and Steel" (1997), John Wiley and Sons
- R. F. Conley., "Practical Dispersion A guide to Understanding and Formulation Slurries" (1996), Wiley-VCN
- Y. I. Kim., , Trans. Mater. Process, 7, pp.20~ (2011)
- K. O. Oh., , Met Foam. (2011)
- D. T. Queheillalt., , J. Mater. Res, 16, pp.1028~1036 (2001)
- Y. Boonyongmaneerat., , Adv. Eng. Mater, 10, pp.379~383 (2008)
- O. Smorygo., , Scr. Mater, 58, pp.910~913 (2008)
- D. T. Queheillalt., , Scr. Mater, 50, pp.313~317 (2004)
- K. A. Khor., , Mater. Sci. Eng. A, 356, pp.130~135 (2003)
- H. Choe., , Mater. Sci. Eng. A, 384, pp.184~193 (2004)
- H. Choe., , Acta Mater, 52, pp.1283~1295 (2004)
- O. Andersen., , Adv. Eng. Mater, 2, pp.192~ (2000)
- Sumitomo Electric, "Product data sheet of “Celmet”", ~ (1986)
- Neumann P., "Metal foams and porous metal structures", Int. Conf., Bremen, Germany, pp.167~ (1999), MIT Press
- B. A. A. L. Van Setten., , Catal. Rev. -Sci. Eng, 43, pp.489~564 (2001)