동결건조 공정에서 동결제의 응고조건이 기공특성에 미치는 영향
Effect of Solidification Condition of Sublimable Vehicles on the Pore Characteristics in Freeze Drying Process
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The present study demonstrates the effect of solidification condition on the pore structure in freeze dryingprocess using the slurries of CuO/sublimable vehicles. Camphene and Camphor-45 wt% naphthalene based slurries with14 vol% CuO powder were frozen into a mold at -25oC, followed by sublimation at room temperature. The green bodieswere hydrogen-reduced and sintered at 500oC for 1 h. The porous Cu specimen, frozen the CuO/camphene slurryinto the heated mold of the upper part, showed large pores with unidirectional pore channels and small pores in theirinternal wall. Also, it was observed that the size of large pores was decreasing near the bottom part of specimen. Thechange of pore structure depending on the freezing condition was explained by the nucleation behavior of camphenecrystals and rearrangement of solid powders during solidification. In case of porous Cu prepared from CuO/Camphornaphthalenesystem, the pore structure exhibited plate shape as a replica of the original structure of crystallized vehicleswith hypereutectic composition.
Abstract
The present study demonstrates the effect of solidification condition on the pore structure in freeze dryingprocess using the slurries of CuO/sublimable vehicles. Camphene and Camphor-45 wt% naphthalene based slurries with14 vol% CuO powder were frozen into a mold at -25oC, followed by sublimation at room temperature. The green bodieswere hydrogen-reduced and sintered at 500oC for 1 h. The porous Cu specimen, frozen the CuO/camphene slurryinto the heated mold of the upper part, showed large pores with unidirectional pore channels and small pores in theirinternal wall. Also, it was observed that the size of large pores was decreasing near the bottom part of specimen. Thechange of pore structure depending on the freezing condition was explained by the nucleation behavior of camphenecrystals and rearrangement of solid powders during solidification. In case of porous Cu prepared from CuO/Camphornaphthalenesystem, the pore structure exhibited plate shape as a replica of the original structure of crystallized vehicleswith hypereutectic composition.
참고문헌 (16)
- J. Banhart, , Prog. Mater. Sci., 46, pp.559~ (2001)
- M.-J. Suk, , J. Kor. Powd. Met. Inst., 8, pp.215~ (2001)
- P. S. Liu, , J. Mater. Sci., 36, pp.5059~ (2001)
- T. Ohji, , Intern. Mater. Rev., 57, pp.115~ (2012)
- 황해진, "동결건조공정을 이용한 다공성 세라믹스의 미세구조 제어", 한국세라믹학회지, 41(3), pp.8~8 (2004), 한국세라믹학회
- D.-H. Yang, , J. Alloys Compd., 461, pp.221~ (2008)
- S. -T. Oh, , J. Am. Ceram. Soc., 83, pp.1314~ (2000)
- T. Fukasawa, , J. Am. Ceram. Soc., 84, pp.230~ (2001)
- B. -H. Yoon, , J. Am. Ceram. Soc., 90, pp.1753~ (2007)
- S.-T. Oh, , Trans. Nonferrous Met. Soc. China, 22, pp.s688~ (2012)
- S. Deville, , Nature Mater., 8, pp.966~ (2009)
- M.-J. Suk, , J. Crystal Growth, 213, pp.141~ (2000)
- 김민수, "CuO-Camphene 슬러리의 동결건조에 의한 Cu 다공체 제조", 한국분말야금학회지, 18(4), pp.327~331 (2011), 한국분말야금학회
- 권나연, "텅스텐 다공체의 기공특성에 미치는 분말특성 및 동결조건의 영향", 한국분말야금학회지, 19(4), pp.259~263 (2012), 한국분말야금학회[DOI]
- N. O. Shanti, , J. Am. Ceram. Soc., 89, pp.2444~ (2006)
- K. Araki, , J. Am. Ceram. Soc., 87, pp.1859~ (2004)