합성방법과 소결 온도가 PZNN-PZT 압전 세라믹스 소재특성에미치는 영향
Effects of the Mixing Method and Sintering Temperature on the Characteristics of PZNN-PZT Piezoelectric Ceramic Materials
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The impact of different mixing methods and sintering temperatures on the microstructure and piezoelectric properties of PZNN-PZT ceramics is investigated. To improve the sinterability and piezoelectric properties of these ceramics, the composition of 0.13Pb((Zn0.8Ni0.2)1/3Nb2/3)O3-0.87Pb(Zr0.5Ti0.5)O3 (PZNN-PZT) containing a Pb-based relaxor component is selected. Two methods are used to create the powder for the PZNN-PZT ceramics. The first involves blending all source powders at once, followed by calcination. The second involves the preferential creation of columbite as a precursor, by reacting NiO with Nb2O5 powder. Subsequently, PZNN-PZT powder can be prepared by mixing the columbite powder, PbO, and other components, followed by an additional calcination step. All the PZNNPZT powder samples in this study show a nearly-pure perovskite phase. High-density PZNN-PZT ceramics can be fabricated using powders prepared by a two-step calcination process, with the addition of 0.3 wt% MnO2 at even relatively low sintering temperatures from 800oC to 1000oC. The grain size of the ceramics at sintering temperatures above 900oC is increased to approximately 3 μm. The optimized PZNN-PZT piezoelectric ceramics show a piezoelectric constant (d33) of 360 pC/N, an electromechanical coupling factor (kp) of 0.61, and a quality factor (Qm) of 275.
Abstract
The impact of different mixing methods and sintering temperatures on the microstructure and piezoelectric properties of PZNN-PZT ceramics is investigated. To improve the sinterability and piezoelectric properties of these ceramics, the composition of 0.13Pb((Zn0.8Ni0.2)1/3Nb2/3)O3-0.87Pb(Zr0.5Ti0.5)O3 (PZNN-PZT) containing a Pb-based relaxor component is selected. Two methods are used to create the powder for the PZNN-PZT ceramics. The first involves blending all source powders at once, followed by calcination. The second involves the preferential creation of columbite as a precursor, by reacting NiO with Nb2O5 powder. Subsequently, PZNN-PZT powder can be prepared by mixing the columbite powder, PbO, and other components, followed by an additional calcination step. All the PZNNPZT powder samples in this study show a nearly-pure perovskite phase. High-density PZNN-PZT ceramics can be fabricated using powders prepared by a two-step calcination process, with the addition of 0.3 wt% MnO2 at even relatively low sintering temperatures from 800oC to 1000oC. The grain size of the ceramics at sintering temperatures above 900oC is increased to approximately 3 μm. The optimized PZNN-PZT piezoelectric ceramics show a piezoelectric constant (d33) of 360 pC/N, an electromechanical coupling factor (kp) of 0.61, and a quality factor (Qm) of 275.
참고문헌 (19)
- M. P. Zheng, , J. Eur. Ceram. Soc, 33, pp.1447~ (2013)
- X. Zeng, , J. Alloys Compd, 485, pp.843~ (2009)
- H. L. Li, , Ceram. Int., 41, pp.4822~ (2015)
- L. D. Vuong, , Int. J. Mat. Chem, 3, pp.39~ (2013)
- S. B. Seo, , J. Am. Ceram. Soc., 87, pp.1238~ (2004)
- S. M. Lee, , J. Electroceram., 18, pp.311~ (2007)
- N. Vittayakorn, "Piezoelectric properties of (1 ？ x)Pb(Zr1", 2Ti1, 3Nb2, pp.3)O3 ceramics prepared by the columbite？(wolframite) precursor method, Current Applied Physics[DOI]
- E. S. Na, , J. Kor. Ceram. Soc., 36, pp.1235~ (1999)
- S. H. Lee, , J. Eur. Ceram. Soc., 26, pp.111~ (2006)
- L. Srisombat, , Chiang Mai J. Sci., 36, pp.69~ (2009)
- J. H. Yoo, , Sens. Actuators, A, 255, pp.160~ (2017)
- M. C. Chure, , Adv. Mat. Res., 284, pp.1375~ (2011)
- R. Bjork, , J. Am. Ceram. Soc., 96, pp.103~ (2013)
- H. Fan, , J. Appl. Phys, 91, pp.317~ (2002)
- 김유석, "PLZT(8", 65, 전기전자재료학회논문지, pp.2016, 29(10)[DOI]
- G. Peng, , J. Mater. Sci: Mater. Electron, 27, pp.3145~ (2016)
- E. M. Alkoy, , IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 63, pp.907~ (2016)
- N. D. T. Luan, , Int. J. Mat. Chem., 3, pp.51~ (2013)
- C. W. Ahn, , Jpn. J. Appl. Phys., 44, pp.1314~ (2005)