고밀도화 공정에 의한 Fe-Co 계 밸브시트 합금의 조직변화와 열적 특성
Thermal Properties and Microstructural Changes of Fe-Co System Valve Seat Alloy by High Densification Process
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Infiltration is a popular technique used to produce valve seat rings and guides to create dense parts. In order to develop valve seat material with a good thermal conductivity and thermal expansion coefficient, Cu-infiltrated properties of sintered Fe-Co-M(M=Mo,Cr) alloy systems are studied. It is shown that the copper network that forms inside the steel alloy skeleton during infiltration enhances the thermal conductivity and thermal expansion coefficient of the steel alloy composite. The hard phase of the CoMoCr and the network precipitated FeCrC phase are distributed homogeneously as the infiltrated Cu phase increases. The increase in hardness of the alloy composite due to the increase of the Co, Ni, Cr, and Cu contents in Fe matrix by the infiltrated Cu amount increases. Using infiltration, the thermal conductivity and thermal expansion coefficient were increased to 29.5 W/mK and 15.9 um/moC, respectively, for tempered alloy composite.
Abstract
Infiltration is a popular technique used to produce valve seat rings and guides to create dense parts. In order to develop valve seat material with a good thermal conductivity and thermal expansion coefficient, Cu-infiltrated properties of sintered Fe-Co-M(M=Mo,Cr) alloy systems are studied. It is shown that the copper network that forms inside the steel alloy skeleton during infiltration enhances the thermal conductivity and thermal expansion coefficient of the steel alloy composite. The hard phase of the CoMoCr and the network precipitated FeCrC phase are distributed homogeneously as the infiltrated Cu phase increases. The increase in hardness of the alloy composite due to the increase of the Co, Ni, Cr, and Cu contents in Fe matrix by the infiltrated Cu amount increases. Using infiltration, the thermal conductivity and thermal expansion coefficient were increased to 29.5 W/mK and 15.9 um/moC, respectively, for tempered alloy composite.
참고문헌 (15)
- E. Meurisse, "TOOL 2012", pp.215~ (2012), Verlag Gutenberghaus
- SA. Rovalma, "EPO, EP 1887096A1", ~ (2008)
- M. S. Lane, , Modern Development in Powder Metallurgy, 15, pp.797~ (1984)
- K. Shimada, , Int. J. Powder Metall, 27, pp.357~ (1991)
- J. Wilzer, "TOOL 2012", pp.143~ (2012), Verlag Gutenberghaus
- J. Wilzer, , J. Mater. Sci, 48, pp.8483~ (2013)
- J. Wilzer, , HTM J. Heat Treat. Mater, 69, pp.325~ (2014)
- 김기정, "표면치밀화 기술에 의해 제조된 소결 기어의 기계적 특성", 한국분말재료학회지, 19(3), pp.189~195 (2012), 한국분말재료학회[DOI]
- G. Straffelini, , Powder Metall, 36, pp.135~ (1993)
- C. Schade, , Powder Metall, 49, pp.15~ (2013)
- S. Klein, , J. Mater. Sci, 50, pp.3586~ (2015)
- 문희권, "바나듐 분말 고속도공구강의 이차경화 및 충격인성에 미치는 오스테니타이징 온도의 영향", 대한금속·재료학회지, 46(8), pp.477~481 (2008), 대한금속·재료학회
- 최성태, "소결 밸브시트의 미세조직 및 기계적 성질에 미치는 볼밀 분말 혼합비의 영향", 한국분말재료학회지, 10(2), pp.89~96 (2003), 한국분말재료학회
- J. K. Choi, , J. Korean Powder Metall. Inst, 6, pp.163~ (1999)
- 김영균, "산화물 분산 강화 강 분말이 첨가된 자동차 부품용 철계 복합소재의 미세조직 및 마모 특성", 한국분말재료학회지, 25(1), pp.36~42 (2018), 한국분말재료학회[DOI]