중엔트로피 합금 기지 위에 적층조형된 스테인리스강과 타이타늄 합금의 접합특성 분석
Joint Properties of Stainless Steel and Titanium Alloys Additive Manufactured on Medium Entropy Alloys
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Additive manufacturing (AM) is a highly innovative method for joining dissimilar materials for industrial applications. In the present work, AM of STS630 and Ti-6Al-4V powder alloys on medium entropy alloys (MEAs) NiCrCo and NiCrCoMn is studied. The STS630 and Ti64 powders are deposited on the MEAs. Joint delamination and cracks are observed after the deposition of Ti64 on the MEAs, whereas the deposition of STS630 on the MEAs is successful, without any cracks and joint delamination. The microstructure around the fusion zone interface is characterized by scanning electron microscopy and X-ray diffraction. Intermetallic compounds are formed at the interfacial regions of MEA-Ti64 samples. In addition, Vicker’s hardness value increased dramatically at the joint interface between MEAs and Ti-6Al-4V compared to that between MEAs and STS630. This result is attributed to the brittle nature of the joint, which can lead to a decrease in the joint strength.
Abstract
Additive manufacturing (AM) is a highly innovative method for joining dissimilar materials for industrial applications. In the present work, AM of STS630 and Ti-6Al-4V powder alloys on medium entropy alloys (MEAs) NiCrCo and NiCrCoMn is studied. The STS630 and Ti64 powders are deposited on the MEAs. Joint delamination and cracks are observed after the deposition of Ti64 on the MEAs, whereas the deposition of STS630 on the MEAs is successful, without any cracks and joint delamination. The microstructure around the fusion zone interface is characterized by scanning electron microscopy and X-ray diffraction. Intermetallic compounds are formed at the interfacial regions of MEA-Ti64 samples. In addition, Vicker’s hardness value increased dramatically at the joint interface between MEAs and Ti-6Al-4V compared to that between MEAs and STS630. This result is attributed to the brittle nature of the joint, which can lead to a decrease in the joint strength.
참고문헌 (16)
- J. H. Kim, , Mater. Sci. Eng., A, 712, pp.108~ (2017)
- D. E. Jodi, , Mater. Lett, 253, pp.327~ (2019)
- J. W. Yeh, , Adv. Eng. Mater, 6, pp.299~ (2004)
- 임다미, "고엔트로피 합금의 제조 방법과 연구 동향: 리뷰", 대한금속·재료학회지, 55(10), pp.671~683 (2017), 대한금속·재료학회[DOI]
- N. K. Adomako, , J. Therm. Anal. Calorim, 133, pp.13~ (2018)
- T. Fujieda, , Addit. Manuf, 25, pp.412~ (2019)
- S. Chen, , Entropy, 20, pp.937~ (2018)
- H. Attar, , Int. J. Mach. Tools Manuf, 133, pp.85~ (2018)
- Y. Chew, , Mater. Sci. Eng., A, 744, pp.137~ (2019)
- N. K. Adomako, , Mater. Res. Lett, 7, pp.259~ (2019)
- N. K. Adomako, , Mater. Sci. Eng., A, 732, pp.378~ (2018)
- 백성은, "Direct energy deposition 공정으로 제조된 SUS630 스테인리스강 적층조형체의 경도 및 미세조직 연구", 한국분말재료학회지, 25(3), pp.220~225 (2018), 한국분말재료학회[DOI]
- 남상우, "고엔트로피 합금을 이용한 레이저 클래딩 연구동향", 대한용접접합학회지, 35(4), pp.58~66 (2017), 대한용접접합학회[DOI]
- S. W. Kim, , Mater. Sci. Eng., A, 718, pp.321~ (2018)
- Jeoung Han Kim, "Tensile Properties and Serrated Flow Behavior of As‑Cast CoCrFeMnNi High‑Entropy Alloy at Room and Elevated Temperatures", Metals and Materials International, 25(2), pp.296~303 (2019), 대한금속·재료학회[DOI]
- S. Y. Yang, , J. Therm. Anal. Calorim, 133, pp.5~ (2018)