Microstructural Evolution and Mechanical Properties of Ti-6Al-4V Alloy through Selective Laser Melting: Comprehensive Study on the Effect of Hot Isostatic Pressing (HIP)
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study explores the profound impact of varying oxygen content on microstructural and mechanical properties in specimens HO and LO. The higher oxygen concentration in specimen HO is found to significantly influence alpha lath sizes, resulting in a size of 0.5-1 μm, contrasting with the 1-1.5 μm size observed in specimen LO. Pore fraction, governed by oxygen concentration, is high in specimen HO, registering a value of 0.11%, whereas specimen LO exhibits a lower pore fraction (0.02%). Varied pore types in each specimen further underscore the role of oxygen concentration in shaping microstructural morphology. Despite these microstructural variations, the average hardness remains consistent at ~370 HV. This study emphasizes the pivotal role of oxygen content in influencing microstructural features, contributing to a comprehensive understanding of the intricate interplay between elemental composition and material properties.
Abstract
This study explores the profound impact of varying oxygen content on microstructural and mechanical properties in specimens HO and LO. The higher oxygen concentration in specimen HO is found to significantly influence alpha lath sizes, resulting in a size of 0.5-1 μm, contrasting with the 1-1.5 μm size observed in specimen LO. Pore fraction, governed by oxygen concentration, is high in specimen HO, registering a value of 0.11%, whereas specimen LO exhibits a lower pore fraction (0.02%). Varied pore types in each specimen further underscore the role of oxygen concentration in shaping microstructural morphology. Despite these microstructural variations, the average hardness remains consistent at ~370 HV. This study emphasizes the pivotal role of oxygen content in influencing microstructural features, contributing to a comprehensive understanding of the intricate interplay between elemental composition and material properties.
참고문헌 (23)
- C. Cui, , Mater. Des, 32, pp.1684~ (2011)
- S. Liu, , Mater. Des, 164, pp.107552~ (2019)
- E. Uhlmann, , Procedia CIRP, 35, pp.55~ (2015)
- N. A. Waterman, , World Class Design to Manufacture, 1, pp.27~ (1994)
- L. Parry, , Addit. Manuf, 12, pp.1~ (2016)
- R. K. Gupta, , Mater. Sci. Eng. A, 662, pp.537~ (2016)
- C. de Formanoir, , Mater. Res. Lett, 5, pp.201~ (2017)
- A. V. S. R. Prasad, , Procedia Mater. Sci, 5, pp.2567~ (2014)
- H. Park, , J. Powder Mater, 30, pp.140~ (2023)
- T. Y. Kim, , J. Powder Mater, 29, pp.99~ (2022)
- J. -Y. Kim, , J. Powder Mater, 30, pp.146~ (2023)
- C. Park, , J. Mater. Res. Technol, 25, pp.172~ (2023)
- C. Park, , Mater. Lett, 337, pp.133936~ (2023)
- N. K. Adomako, , Addit. Manuf, 59, pp.103174~ (2022)
- "Standard Guide for Directed Energy Deposition of Metals"[URL]
- H. Tang, , JOM, 67, pp.555~ (2015)
- An Investigation into the Recycling of Ti-6Al-4V Powder Used Within SLM to Improve Sustainability, "R. O’Leary", ~
- L. C. Ardila, , Phys. Procedia, 56, pp.99~ (2014)
- Effects of powder recycling on stainless steel powder and built material properties in metal powder bed fusion processes, "G. Jacob", NIST, ~ (2017)
- P. Nandwana, , Metall. Mater. Trans. B, 47, pp.754~ (2015)
- W. A. Grell, , Addit. Manuf, 17, pp.123~ (2017)
- M. Peters, "Titanium and Titanium Alloys", pp.1~ (2003), John Wiley &Sons, Ltd
- M. Yan, , Acta Mater, 68, pp.196~ (2014)