수소 환원 온도에 따른 몰리브덴 산화물의 성형 및 상압소결특성 평가
Characterization of Compacted and Pressureless Sintered Parts for Molybdenum Oxide Powder according to Hydrogen Reduction Temperature
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Molybdenum, valued for its high melting point and exceptional physical and chemical properties, is studied in diverse fields such as electronics, petrochemicals, and aviation. Among molybdenum oxides, molybdenum dioxide stands out for its higher electrical conductivity than other transition metal oxides due to its structural characteristics, exhibiting metallic properties. It is applied as pellets to gas sensors, semiconductors, and secondary batteries for its properties. Thus, research on molybdenum dioxide compaction and pressureless sintering is necessary, yet research on pressureless sintering is currently insufficient. This study synthesized MoO₃ powder via solution combustion synthesis and reduced it using the 3% hydrogen/argon gas mixture to investigate the effect of reduction temperature on the powder. Additionally, the reduced powder was compacted and subjected to pressureless sintering with temperature as a variable. The density and the microstructure of brown parts were analyzed and discussed.
Abstract
Molybdenum, valued for its high melting point and exceptional physical and chemical properties, is studied in diverse fields such as electronics, petrochemicals, and aviation. Among molybdenum oxides, molybdenum dioxide stands out for its higher electrical conductivity than other transition metal oxides due to its structural characteristics, exhibiting metallic properties. It is applied as pellets to gas sensors, semiconductors, and secondary batteries for its properties. Thus, research on molybdenum dioxide compaction and pressureless sintering is necessary, yet research on pressureless sintering is currently insufficient. This study synthesized MoO₃ powder via solution combustion synthesis and reduced it using the 3% hydrogen/argon gas mixture to investigate the effect of reduction temperature on the powder. Additionally, the reduced powder was compacted and subjected to pressureless sintering with temperature as a variable. The density and the microstructure of brown parts were analyzed and discussed.
참고문헌 (18)
- M. S. Park, , Trends Met. Mater. Eng, 21, pp.15~ (2008)
- Y. Zhao, , Sci. Technol. Adv. Mater, 14, pp.043501~ (2013)
- L. Zhou, , ACS Appl. Mater. Inter, 3, pp.4853~ (2011)
- L. Zhang, , J. Mater. Res, 32, pp.292~ (2017)
- H. Zhao, , Int. J. Hydrogen Energy, 35, pp.17422~ (2020)
- H. Zhao, , J. Mater. Chem, 8, pp.6732~ (2020)
- H. Du, , Nanoscale, 7, pp.5752~ (2015)
- F. Xing, , Chem. Eng. J, 450, pp.138130~ (2022)
- M. Saghafi, , Int. J. Refract. Met. Hard Mater, 30, pp.128~ (2012)
- P. A. Benavides, , Mater. Sci. Eng. A, 701, pp.237~ (2017)
- G. T. Lee, , J. Am. Ceram. Soc, 102, pp.801~ (2019)
- H. G. Kim, , J. Powder Mater, 14, pp.386~ (2007)
- H. S. Huang, , Metall. Trans. A, 33, pp.657~ (2002)
- S. Y. Lee, , J. Powder Mater, 27, pp.394~ (2020)
- N. Desai, , J. Nanomed. Nanotechnol, 6, pp.1000338~ (2015)
- J. Dang, , HTMP, 33, pp.305~ (2014)
- B. D Cullity, "Elements of X – ray Diffraction" (1978), Addison Wesley
- Y. Qing, , Materials, 16, pp.2841~ (2023)