자전연소합성법을 이용한 Cr 분말 제조시 산세조건에 따른 물성평가
Effect of Acid Leaching Conditions on the Properties of Cr Powder Produced by Self-propagating High-temperature Synthesis
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we evaluated the effects of acid leaching on the properties of Cr powder synthesized using self-propagating high-temperature synthesis (SHS). Cr powder was synthesized from a mixture of Cr2O3 and magnesium (Mg) powders using the SHS Process, and the byproducts after the reaction were removed using acid leaching. The properties of the recovered Cr powder were analyzed via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), particle size analysis (PSA), and oxygen content analysis. The results show that perfect selective leaching of Cr is challenging because of various factors such as incomplete reaction, reaction kinetics, the presence of impurities, and incompatibility between the acid and metal mixture. Therefore, this study provides essential information on the properties under acidic conditions during the production of high-quality Cr powder using a self-propagating high-temperature synthesis method.
Abstract
In this study, we evaluated the effects of acid leaching on the properties of Cr powder synthesized using self-propagating high-temperature synthesis (SHS). Cr powder was synthesized from a mixture of Cr2O3 and magnesium (Mg) powders using the SHS Process, and the byproducts after the reaction were removed using acid leaching. The properties of the recovered Cr powder were analyzed via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), particle size analysis (PSA), and oxygen content analysis. The results show that perfect selective leaching of Cr is challenging because of various factors such as incomplete reaction, reaction kinetics, the presence of impurities, and incompatibility between the acid and metal mixture. Therefore, this study provides essential information on the properties under acidic conditions during the production of high-quality Cr powder using a self-propagating high-temperature synthesis method.
참고문헌 (20)
- J. R. Davis, , pp.584~ (2000), ASM international
- S. E. P. Gonçalves, , Interfacial Phenom Heat Transf, pp.23~ (2017)
- S. Khara, , Surf. Coat. Technol, 296, pp.203~ (2016)
- S. H. Chang, , Int. J. Refract. Hard Met, 35, pp.70~ (2012)
- A. H. Sully, "Chromium" (1967), Butterworths
- O. Hiroaki, "Binary Alloy Phase Diagrams", pp.138~ (1990), Materials Park
- G. Z. Chen, , Metall. Mater. Trans. B, 35B, pp.223~ (2004)
- T. Mori, , ISIJ Int, 47, pp.1387~ (2007)
- N. M. Anacleto, "Reduction of chromium oxide and ore by methane-containing gas mixtures", pp.71~ (2018)
- National Research Council, "High-Purity Chromium Metal" (1995), National Academy Press
- J. Davies, , Minerals, 12, pp.534~ (2022)
- Q. Zhao, , Process Saf Environ Prot, 113, pp.78~ (2018)
- M. G. Kang, , Appl. Surf. Sci, 254, pp.4066~ (2008)
- "FactSage Software Ver 8. 0"[URL]
- J. Jeřábková, , Sci. Agric. Bohem, 49, pp.297~ (2018)
- J. S. Park, , J. Am. Ceram. Soc, 71, pp.173~ (1988)
- H. H. Nersisyan, , Combust. Flame, 219, pp.136~ (2020)
- H. H. Nersisyan, , Combust. Flame, 135, pp.539~ (2003)
- 심재진, "탄탈륨 카바이드 분말 특성제어를 위한 원료 전처리 기술", 한국분말재료학회지, 25(3), pp.251~256 (2018), 한국분말재료학회[DOI]
- Y. K, , Arch. Metall. Mater, 66, pp.935~ (2021)