Methyltrichlorosilane 표면 처리를 통한 적층 제조용 AlSi10Mg 분말의 유동 특성 향상 공정 연구
Improving Flow Property of AlSi10Mg Powder for Additive Manufacturing via Surface Treatment using Methyltrichlorosilane
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
AlSi10Mg alloys are being actively studied through additive manufacturing for application in the automobile and aerospace industries because of their excellent mechanical properties. To obtain a consistently high quality product through additive manufacturing, studying the flowability and spreadability of the metal powder is necessary. AlSi10Mg powder easily forms an oxide film on the powder surface and has hydrophilic properties, making it vulnerable to moisture. Therefore, in this study, AlSi10Mg powder was hydrophobically modified through silane surface treatment to improve the flowability and spreadability by reducing the effects of moisture. The improved flowability according to the number of silane surface treatments was confirmed using a Carney flowmeter. In addition, to confirm the effects of improved spreadability, the powder prior to surface treatment and that subjected to surface treatment four times were measured and compared using s self-designed recoating tester. The results of this study confirmed the improved flowability and spreadability based on the modified metal powder from hydrophilic to hydrophobic for obtaining a highquality additive manufacturing product.
Abstract
AlSi10Mg alloys are being actively studied through additive manufacturing for application in the automobile and aerospace industries because of their excellent mechanical properties. To obtain a consistently high quality product through additive manufacturing, studying the flowability and spreadability of the metal powder is necessary. AlSi10Mg powder easily forms an oxide film on the powder surface and has hydrophilic properties, making it vulnerable to moisture. Therefore, in this study, AlSi10Mg powder was hydrophobically modified through silane surface treatment to improve the flowability and spreadability by reducing the effects of moisture. The improved flowability according to the number of silane surface treatments was confirmed using a Carney flowmeter. In addition, to confirm the effects of improved spreadability, the powder prior to surface treatment and that subjected to surface treatment four times were measured and compared using s self-designed recoating tester. The results of this study confirmed the improved flowability and spreadability based on the modified metal powder from hydrophilic to hydrophobic for obtaining a highquality additive manufacturing product.
참고문헌 (34)
- X. P. Li, , Addit. Manuf, 10, pp.10~ (2016)
- F. Taghavi, , Mater. Des, 30, pp.1604~ (2009)
- K. Kempen, , Phys. Procedia, 39, pp.439~ (2012)
- F. Alghamdi, , SN. Appl. Sci, 1, pp.1~ (2019)
- P. Wei, , Appl. Surf. Sci, 408, pp.38~ (2017)
- 임원빈, "가스 분무법을 이용한 Powder Bed Fusion(PBF) 공정용 AlSi10Mg 합금 분말 제조", 한국분말재료학회지, 28(2), pp.120~126 (2021), 한국분말재료학회
- K. Yuasa, , Adv. Manuf. Technol, 115, pp.3919~ (2021)
- B. Song, , Mater. Des, 35, pp.120~ (2012)
- C. Qiu, , Acta. Mater, 96, pp.72~ (2015)
- A. Strondl, , JOM, 67, pp.549~ (2015)
- L. Cordova, , Euro PM2017, 1, pp.1~ (2017)
- C. Meier, , J. Mater. Process. Technol, 266, pp.484~ (2019)
- 이빈, "금속 Powder Bed Fusion(PBF) 공정용 분말의 특성평가 방법 및 관련 연구 동향", 한국분말재료학회지, 27(6), pp.509~519 (2020), 한국분말재료학회
- Z. Snow, , Addit. Manuf, 28, pp.78~ (2019)
- J.A. Muñiz-Lerma, , Materials, 11, pp.2386~ (2018)
- A. Strondl, , JOM, 67, pp.549~ (2015)
- L. Cordova, , Addit. Manuf, 32, pp.101082~ (2020)
- S. Touzé, , Addit. Manuf, 36, pp.101462~ (2020)
- K. Riener, , Addit. Manuf, 39, pp.101896~ (2021)
- L. J. Jallo, , Powder. Technol, 204, pp.63~ (2010)
- Y. I. Kim, , Appl. Surf. Sci, 556, pp.149645~ (2021)
- R. A. Sims, , Surf. Interface Anal, 50, pp.813~ (2018)
- Y. Chen, , Colloids Surf, A Physicochem Eng Asp, 361, pp.66~ (2010)
- H. Liu, , Appl. Surf. Sci, 451, pp.223~ (2018)
- T. Makowski, , Cellulose, 21, pp.4659~ (2014)
- "ASTM B964, Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel", ~
- "ASTM D5946, Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements", ~
- I. Flores-Vivian, , ACS. Appl. Mater. Interfaces, 5, pp.13284~ (2013)
- E. Bormashenko, , Appl. Phys. Lett, 90, pp.20~ (2007)
- M. Hamzah, , Int. J. Nanoelectron. Mater, 11, pp.3~ (2018)
- G. Beamson, "High resolution XPS of organic polymers", John Wiley & Sons (1992)
- C. D. Wagner, "NIST standard reference database 20, Version 3.4", ~ (2003)
- A. R. Gonzalez-Elipe, , J. Phys. Chem, 92, pp.3471~ (1988)
- I. E. Anderson, , J. Opin. Solid. State. Mater. Sci, 22.1, pp.8~ (2018)