0.2% N을 첨가한 수퍼 2상 스테인리스강의 열처리 조건에 따른 특성 평가 - 제1보: 기계적 특성 및 미세조직
Characteristic Evaluation Based on the Heat Treatment Conditions of Super Duplex Stainless Steel with 0.2% N as an Additive -Part 1: Mechanical Properties and Microstructure
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Super duplex stainless steel has along life in severe environments because of its strength and corrosion resistance. If 0.2~0.3% Nitrogen in aninterstitial solid solution is added, the austenite structure is reinforced. This improves the solid solution hardening and the anticorrosionability. In this study, the mechanical properties and structures of the super duplex stainless steel with the 0.2% N additive were investigated to determine the effect of various volume fractions on the austenite phase. The various volume fractions and distributions of the austenite structure in the applied test specimenswere obtained by changing the heat treatment temperature and cycle. The characteristics by amounts of the σ phase obtained from the precipitation heat treatment were alsoinvestigated. From the results, when the austenite volume fraction increases, the tensile strength decreases and elongation increases. And the σ phase was rapidly increased by increasing theheat treatment time. When the volume fraction of the σ phase increased, tensile strength increased.
Abstract
Super duplex stainless steel has along life in severe environments because of its strength and corrosion resistance. If 0.2~0.3% Nitrogen in aninterstitial solid solution is added, the austenite structure is reinforced. This improves the solid solution hardening and the anticorrosionability. In this study, the mechanical properties and structures of the super duplex stainless steel with the 0.2% N additive were investigated to determine the effect of various volume fractions on the austenite phase. The various volume fractions and distributions of the austenite structure in the applied test specimenswere obtained by changing the heat treatment temperature and cycle. The characteristics by amounts of the σ phase obtained from the precipitation heat treatment were alsoinvestigated. From the results, when the austenite volume fraction increases, the tensile strength decreases and elongation increases. And the σ phase was rapidly increased by increasing theheat treatment time. When the volume fraction of the σ phase increased, tensile strength increased.
참고문헌 (10)
- "Annual Book of ASTM Standards", pp.56~76 (1977)
- Charles, J., "Super Duplex Stainless Steels: Structure and Properties", Proc. of Duplex Stainless Steels '91, 1, pp.151~168 (1991), Les Editians de Physique
- Charles, J., "Structure and Mechanical Properties of Duplex Stainless Steels", International Conf., Duplex Stainless Steels (1994)
- Davis, J.R., "ASM Specialty Handbooks Steels", pp.13~ (1994), ASM International
- 강창룡, "25Cr-7Ni-3Mo 2상 스테인리스강의 미세조직과 기계적성질", 한국열처리공학회지, 11(3), pp.192~199 (1998)
- 강홍주, "수퍼 2상 스테인리스강의 부식, 피로균열진전과 음향방출 특성", 박사, pp.2008
- 도재윤, "수퍼 2상 스테인리스강의 피로균열 진전시 발생하는 음향방출신호 특성에 미치는 $\sigma$상 석출의 영향", 대한금속재료학회지, 39(12), pp.1339~1405 (2001)
- 안석환, "수퍼 2상 스테인리스강의 열처리 조건에 따른 피로균열전파거동 및 부식특성", 2008년도 한국해양과학기술협의회 공동학술대회 초록집, 제주국제컨벤션 센터, pp.343~ (2008)
- 이상기, "수퍼 2상 스테인리스강의 피로균열진전 특성에 미치는 미세조직의 영향", 한국해양공학회지, 14(2), pp.66~70 (2000)
- 이상기, "수퍼 2상 스테인리스강의 $\sigma$상 석출에 따른 피로균열진전특성과 음향방출신호의 시간-주파수 해석", 석사, pp.2001