Adaptive Tracking Controller Design for Welding Mobile Manipulator with Unknown Parameters
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper presents an adaptive tracking control method for a welding mobile manipulator with several unknown parameters such as the last length of the manipulator, the wheel radius and the distance from the center to the wheel. The mobile manipulator consisted of the manipulator and the mobile-platform. Kinematic modelings for the manipulator and the mobile-platform with several unknown parameters were produced. The tracking error vectors for the manipulator and the mobile-platform were defined. These adaptive controllers were designed based on the Lyapunov function to guarantee the stability of the whole system when the mobile manipulator performs a welding task. Update laws were also designed to estimate the unknown dimensional parameters. To implement the designed controllers, a control system integrated with PIC16F877 microprocessors and a TMS320C32 DSP was developed. Simulation and experimental results are presented to show the effectiveness of the proposed controllers.
Abstract
This paper presents an adaptive tracking control method for a welding mobile manipulator with several unknown parameters such as the last length of the manipulator, the wheel radius and the distance from the center to the wheel. The mobile manipulator consisted of the manipulator and the mobile-platform. Kinematic modelings for the manipulator and the mobile-platform with several unknown parameters were produced. The tracking error vectors for the manipulator and the mobile-platform were defined. These adaptive controllers were designed based on the Lyapunov function to guarantee the stability of the whole system when the mobile manipulator performs a welding task. Update laws were also designed to estimate the unknown dimensional parameters. To implement the designed controllers, a control system integrated with PIC16F877 microprocessors and a TMS320C32 DSP was developed. Simulation and experimental results are presented to show the effectiveness of the proposed controllers.
참고문헌 (6)
- Ngo Manh Dung, "Two-Wheeled Welding Mobile Robot for Tracking a Smooth Curved Welding Path Using Adaptive Sliding-Mode Control Technique", International Journal of Control, Automation, and Systems, 5(3), pp.283~294 (2007), 제어·로봇·시스템학회
- Fukao, T., "Adaptive Tracking Control of a Non-holonomic Mobile Robot", Transactions on Robotics and Automation, 16(5), pp.609~615 (2000)
- Lee, G.D., "Real Time Control for Postionand Velocity of Robot Manipulator with Parameter Uncertainties", J. of Ocean Engineering ad Technology, 9(2), pp.30~40 (1995)
- Lee, S.M., "Robust Control of a Manipulator Contacting the Uncertain Environment", J. of Ocean Engineering ad Technology, 9(2), pp.175~185 (1995)
- Phan, T.T., "Decentralized Control Design for Welding Mobile Manipulator", Transactions on International Journal (KSME), 19(3), pp.756~767 (2005)
- Yamamoto, Y., "Coordinating Locomotion and Manipulation of a Mobile Manipulator", Proc. IEEE Intl. Conf. Deci. Cont., pp.2643~2648 (1992)