FPSO 다점 계류 시스템의 최적 설계 연구
Study on Optimum Design of FPSO Spread Mooring System
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
For a spread-moored FPSO (Floating Production, Storage, & Off-loading) subjected to environmental excitation from waves, current, and wind, a procedure to determine optimum length and stiffness of mooring lines is suggested using quasi-static frequency domain response analyses. Coupled relations between design parameters are closely examined. In consideration of this, optimized design parameters are proposed based on minimum weight condition. The initial design parameters for numerical analyses are calculated using the static catenary equation of mooring lines. It is demonstrated the line tension and vessel’s offset are influenced by the mooring line length and stiffness. Accordingly it is suggested the optimum vessel’s offset range should be determined considering line fatigue damage. The availability and limitation of the application of quasi-static analysis method for spread mooring system are explained by comparing the result of time domain analysis with one of frequency domain analysis.
Abstract
For a spread-moored FPSO (Floating Production, Storage, & Off-loading) subjected to environmental excitation from waves, current, and wind, a procedure to determine optimum length and stiffness of mooring lines is suggested using quasi-static frequency domain response analyses. Coupled relations between design parameters are closely examined. In consideration of this, optimized design parameters are proposed based on minimum weight condition. The initial design parameters for numerical analyses are calculated using the static catenary equation of mooring lines. It is demonstrated the line tension and vessel’s offset are influenced by the mooring line length and stiffness. Accordingly it is suggested the optimum vessel’s offset range should be determined considering line fatigue damage. The availability and limitation of the application of quasi-static analysis method for spread mooring system are explained by comparing the result of time domain analysis with one of frequency domain analysis.
참고문헌 (11)
- 홍도천, "부유식 해양구조물에 작용하는 시간평균 파표류력에 관한 고찰", 한국해양공학회지, 16(3), pp.8~18 (2002), 한국해양공학회
- API, "Design and Analysis of Stationkeeping Systems for Floating Structures" (2005), RP-2SK
- Quasi-Dynamic Analysis of Mooring Systems using ARIANE Software, "Bureau Veritas", ~, pp.Guidance Note - NI461 (1998)
- Huse, E., "Influence of Mooring Line Damping Upon Rig Motions", Proc. 18th Offshore Technology Conf. (1986)
- Huse, E., "Practical Estimation of Mooring Line Damping", Proc. 20th Offshore Technology Conf. (1988)
- Ansari, K.A., "The Effect of Cable Dynamics on the Station-Keeping Response of a Moored Offshore Vessel", Transactions of the ASME, 108, pp.52~58 (1986)
- Maruo, H., "The Drift, a Body Floating on Waves", Journal Ship Research, 4, pp.1~10 (1960)
- Newman, J.N., "The Drift Fore and Moment on Ships in Waves", Journal Ship Research, 11, pp.51~60 (1967)
- Faltinsen, O.M., "Sea loads on Ships and Offshore Structures", pp.257~270 (1993), Cambridge University Press
- Pinkster, J.A., "Mean and Low Frequency Wave Drifting Forces on Floating Structures", Ocean Engineering, 6, pp.593~615 (1979)
- 유상수, "Mooring Cost Sensitivity Study Based on Cost-Optimum Mooring Design", 한국해양공학회지, 23(1), pp.1~6 (2009), 한국해양공학회