Subsea 생산 시스템 시뮬레이션에 관한 연구
Study on Simulation of Subsea Production System
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study was the implementation of a simulation for a subsea production system. This subsea production system is installed under environments with high pressure and low temperature. Most of the processes for oil and gas production occur in the subsea equipment. Therefore, an understanding and study of subsea production systems is very difficult because people cannot directly observe the processesoccurring in the subsea production system. A simulation system can be a useful solution for this difficult problem. In this research, information models and a 3‐D graphic model of the subsea equipment were built using the object‐oriented technology and 3‐D CAD. The entire system was implemented with the help of simulation software, 3‐DVIA Virtools. The simulation system forthe subsea production system was tested using several production process scenarios. The results of the tests showed that the simulation system is very useful for understanding a subsea production system and could be a good educational tool.
Abstract
The purpose of this study was the implementation of a simulation for a subsea production system. This subsea production system is installed under environments with high pressure and low temperature. Most of the processes for oil and gas production occur in the subsea equipment. Therefore, an understanding and study of subsea production systems is very difficult because people cannot directly observe the processesoccurring in the subsea production system. A simulation system can be a useful solution for this difficult problem. In this research, information models and a 3‐D graphic model of the subsea equipment were built using the object‐oriented technology and 3‐D CAD. The entire system was implemented with the help of simulation software, 3‐DVIA Virtools. The simulation system forthe subsea production system was tested using several production process scenarios. The results of the tests showed that the simulation system is very useful for understanding a subsea production system and could be a good educational tool.
참고문헌 (7)
- Winther-Larssen, E. H., "Design of an Electric X-mas Tree Gate Valve Actuator, Master of Science in Engineering Cybernetics", 석사, Science in Engineering Cybernetics, pp.2007
- 최한석, "심해석유 탐사 및 개발의 검토", 한국해양공학회지, 22(4), pp.72~77 (2008), 한국해양공학회
- Rumbaugh, J., "Object-Oriented Modeling and Design" (1991), Prentice Hall
- 박주용, "교육용 해양플랜트 Rig 굴착 시뮬레이션 구현", 한국시뮬레이션학회 논문지, 20(2), pp.11~17 (2011), 한국시뮬레이션학회
- 박주용, "H-beam 로봇 절단용 3차원 시뮬레이터의 개발과 이를 이용한 절단 최적화에 관한 연구", 대한용접접합학회지, 30(4), pp.334~338 (2012), 대한용접접합학회
- Damsleth, P., "Challenges and Concept Solutions for 46-inch Diameter Deepwater PLEM –Connector Qualification", Proceedings of the Twenty-second International Offshore and Polar Engineering Conference (2012), ISOPE
- Li, Z., "An Analytic Method for the Development Mode of Deepwater Oil and Gas Fields", Proceedings of the Twenty-second International Offshore and Polar Engineering Conference, pp.1041~1047 (2012), ISOPE