감쇠판에 의한 원기둥의 상하운동 저감 모형시험
Model Test for Heave Motion Reduction of a Circular Cylinder by a Damping Plate
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Motion reduction of an offshore structure at resonant frequency is essential for avoiding critical damage to the topside and mooring system. A damping plate has a distinct advantage in reducing the motion of a floating structure by increasing the added mass and the damping coefficient. In this study, the heave motion responses of a circular cylinder with an impermeable and a permeable damping plate attached at the bottom of the cylinder were investigated thru a model test. The viscous damping coefficients for various combinations of porosity were obtained from a free.decay test by determining the ratio between any pair of successive amplitudes. Maximum energy dissipation occurred at a porous plate with a porosity P = 0.1008. Experimental results for regular and irregular waves were compared with an analytical solution by Cho (2011). The measured heave RAO and spectrum reasonably followed the trends of the predicted values. A significant motion reduction at resonant frequency was pronounced and the heaving.motion energy calculated by the integration of the area under the heave motion spectrum was reduced by more than 75% by the damping plate. However, additional energy dissipation by eddies of strong vorticity and flow separation inside a porous damping plate was not found in the present experiments.
Abstract
Motion reduction of an offshore structure at resonant frequency is essential for avoiding critical damage to the topside and mooring system. A damping plate has a distinct advantage in reducing the motion of a floating structure by increasing the added mass and the damping coefficient. In this study, the heave motion responses of a circular cylinder with an impermeable and a permeable damping plate attached at the bottom of the cylinder were investigated thru a model test. The viscous damping coefficients for various combinations of porosity were obtained from a free.decay test by determining the ratio between any pair of successive amplitudes. Maximum energy dissipation occurred at a porous plate with a porosity P = 0.1008. Experimental results for regular and irregular waves were compared with an analytical solution by Cho (2011). The measured heave RAO and spectrum reasonably followed the trends of the predicted values. A significant motion reduction at resonant frequency was pronounced and the heaving.motion energy calculated by the integration of the area under the heave motion spectrum was reduced by more than 75% by the damping plate. However, additional energy dissipation by eddies of strong vorticity and flow separation inside a porous damping plate was not found in the present experiments.
참고문헌 (9)
- 조일형, "수평형 타공판의 소파특성", 한국해안·해양공학회논문집, 14(4), pp.265~273 (2002), 한국해안,해양공학회
- 조일형, "감쇠판이 부착된 원기둥의 동유체력 특성", 한국해양공학회지, 25(1), pp.1~7 (2011), 한국해양공학회
- 최윤락, "바아지형 FPSO의 횡운동 성능에 대한 해석", 한국해양공학회지, 19(3), pp.25~30 (2005), 한국해양공학회
- Garrett, C. J. R., "Wave Forces on a Circular Dock", Journal of Fluid Mechanics, 46(1), pp.129~139 (1971)
- McIver, P., "The Occurrence of Negative Added Mass in Free-surface Problems Involving Submerged Oscillating Bodies", Journal of Engineering Mechanics, 18(1), pp.7~22 (1984)
- Molin, B., "Heave Added Mass and Damping of a Perforated Disk below the Free Surface", In : Proceedings of the 19th International Workshop on Water Waves and Floating Bodies (2004)
- Tao, L., "Heave Motion Suppression of a Spar with a Heave Plate", Ocean Engineering, 31(5-6), pp.669~692 (2004)
- Tao, L., "Hydrodynamic Performance of Solid and Porous Heave Plates", Ocean Engineering, 35(10), pp.1006~1014 (2008)
- Tung, C. C., "Hydrodynamic Forces on Submerged Vertical Circular Cylindrical Tanks under Ground Excitation", Applied Ocean Research, 1(2), pp.75~78 (1979)