전차병 점퍼의 착용만족도 및 보온성에 관한 연구
A Study on Wearing Satisfaction and Thermal Properties of Jumper for Korean Military Tank Drivers
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The purpose of this study is to investigate problems of design, fitness, suitability for movement, and wearing comfort of jumper for Korean military tank drivers through analysis of actual wearing condition by questionnaire and field evaluation and to provide basic data for developing its improved design. The survey was done for 477 military tank drivers and evaluation was performed using thermal manikin to measure insulation. The overall satisfaction for design of jumper for military tank driver was over 3.5(likert scale). The overall satisfaction for fitness of jumper for military tank driver was also over 3.5. The satisfactions for material was between 2.39 and 3.13 and the satisfaction for pilling property was the lowest, followed by static property and shape stability after laundering. The satisfactions for movement suitability were standing(3.81), sitting(3,38), raising hand(forward: 2.90, sideward: 3.01), respectively. In insulation evaluation of jumper for military tank drivers and outwears(jacket, jumper), the insulation of jumper for military tank drivers was lower than outwear(jumper) and same with outwear(jacket). The insulation in dynamic and still condition(without wind) of jumper for military tank driver was 0.37clo and 0.31clo, respectively. Its decreation rate in dynamic condition comparing to still condition was 59% which was lower than jacket(0.73clo) and jumper(1.15clo).
Abstract
The purpose of this study is to investigate problems of design, fitness, suitability for movement, and wearing comfort of jumper for Korean military tank drivers through analysis of actual wearing condition by questionnaire and field evaluation and to provide basic data for developing its improved design. The survey was done for 477 military tank drivers and evaluation was performed using thermal manikin to measure insulation. The overall satisfaction for design of jumper for military tank driver was over 3.5(likert scale). The overall satisfaction for fitness of jumper for military tank driver was also over 3.5. The satisfactions for material was between 2.39 and 3.13 and the satisfaction for pilling property was the lowest, followed by static property and shape stability after laundering. The satisfactions for movement suitability were standing(3.81), sitting(3,38), raising hand(forward: 2.90, sideward: 3.01), respectively. In insulation evaluation of jumper for military tank drivers and outwears(jacket, jumper), the insulation of jumper for military tank drivers was lower than outwear(jumper) and same with outwear(jacket). The insulation in dynamic and still condition(without wind) of jumper for military tank driver was 0.37clo and 0.31clo, respectively. Its decreation rate in dynamic condition comparing to still condition was 59% which was lower than jacket(0.73clo) and jumper(1.15clo).
참고문헌 (9)
- 전은진, "동작성 향상을 위한 비행복의 패턴개선 및 평가", 한국의류산업학회지, 12(5), pp.633~641 (2010), 한국의류산업학회
- International Organization for Standardization., "ISO 11092 : Textile - physiological effects - measurement of thermal and water vapor resistance under steady state conditions (sweating guarded hotplate test)", ISO, ~ (1999)
- 최지숙, "육군 전투복의 기능성 향상을 위한 연구", 복식, 53(5), pp.141~153 (2003), 한국복식학회
- Kim, K. H., "Transactions : A Study on the Functional Design Process and Performance Evaluation of Army's Training Wear", Journal of the Korea Society of Clothing and Textile, 14(2), pp.104~116 (1990)
- Na, M. H., "A Study on the Pattern for the Clean Room Garment of the Overall Type", Korean Association of Human Ecology, 6(2), pp.121~131 (1997)
- Ministry of National Defense., "Korean Military Advertising Booklet" (2010), Ministry of National Defense
- Ministry of National Defense, "Military Paper", Ministry of National Defense, 112~ (2010)
- 권상희, "현대 군복 디자인에 대한 연구 -전쟁양상과 군복 디자인의 관계를 중심으로-", 복식, 56(9), pp.143~156 (2006), 한국복식학회
- 김영희, "자동차 정비 작업복의 기능적 디자인 연구", 한국의류학회지, 31(4), pp.531~539 (2007), 한국의류학회
