Optimal Shape and Boil-Off Gas Generation of Fuel Tank for LNG Fueled Tugboat
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
This paper proposes the optimal shape of an LNG fuel tank with a lattice pressure vessel (LPV) design for a tugboat. The LPV is a Type C tank with a design philosophy of “design by analysis,” which facilitates greater variability of shape compared with other traditional Type C tanks. Further, compared with conventional cylindrical fuel tanks, the LPV provides better volumetric efficiency. Considering the shape of a fuel tank room, a trapezoidal shape of the LPV is concluded as the most optimal design. This study performs two major analyses of the LPV: structural and heat transfer analyses. First, a design procedure of the LPV based on structural analyses is elaborated. The finite element method is used for the analyses. Furthermore, the results guarantee that the maximum stresses by applied loads do not exceed an allowable stress limitation. Second, the heat transfer analysis of the LPV is conducted. LNG boil-off gas generation is analyzed based on various insulation materials and the degree of acuum.
Abstract
This paper proposes the optimal shape of an LNG fuel tank with a lattice pressure vessel (LPV) design for a tugboat. The LPV is a Type C tank with a design philosophy of “design by analysis,” which facilitates greater variability of shape compared with other traditional Type C tanks. Further, compared with conventional cylindrical fuel tanks, the LPV provides better volumetric efficiency. Considering the shape of a fuel tank room, a trapezoidal shape of the LPV is concluded as the most optimal design. This study performs two major analyses of the LPV: structural and heat transfer analyses. First, a design procedure of the LPV based on structural analyses is elaborated. The finite element method is used for the analyses. Furthermore, the results guarantee that the maximum stresses by applied loads do not exceed an allowable stress limitation. Second, the heat transfer analysis of the LPV is conducted. LNG boil-off gas generation is analyzed based on various insulation materials and the degree of acuum.
참고문헌 (11)
- Ahn, J. K., "Design of a Prismatic Pressure Vessel with Internal X-beam Structures for Application in Ships", Ships and Offshore Structures, 12(6), pp.781~792 (2017)[DOI]
- ASME, "BPV Code Section Ⅷ Division 2: Alternative Rules - Design and Fabrication of Pressure Vessels", ~ (2013)
- "Alternative Fuels Insight Platform (AFI)" (2019)[URL]
- Fesmire, J. E., "Standardization in Cryogenic Insulation Systems Testing and Performance Data", Physics Procedia, 67, pp.1089~1097 (2015)[DOI]
- "International Code of Safety for Ships using Gases or Other Low-Flashpoint Fuels" (2014)[URL]
- "International Code of Safety for Ships using Gases or Other Low-Flashpoint Fuels" (2015)[URL]
- International Maritime Organization (IMO), "Report on the Marine Environment Protection Committee on Its Seventysecond Session", Marine Environment Protection Committee(MEPC) 72th Session (2018)
- Ivica A., "Influence of the Required EEDI Reduction Factor on the CO2 Emission from Bulk Carriers", Energy Policy, 84, pp.107~116 (2015)[DOI]
- Kifune, H., "A Study of Fuel Consumption Model Using Tugboat’s Propulsion System", Journal of the Japan Institute of Marine Engineering, 50(4), pp.527~534 (2015)[DOI]
- Lee, J. M., "Design of a Prismatic Pressure Vessel : an Engineering Solution for Non-stiffened-type Vessels", Ocean Engineering, 142, pp.639~649 (2017)[DOI]
- Tseng, C. J., "Thermal Cconductivity of Polyurethane Foams from Room Temperature to 20 K", Cryogenics, 37(6), pp.305~312 (1997)[DOI]