Punching Fracture Experiments and Simulations of Unstiffened and Stiffened Panels for Ships and Offshore Structures
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Ductile fracture prediction is critical for the reasonable damage extent assessment of ships and offshore structures subjected to accidental loads, such as ship collisions and groundings. A fracture model combining the Hosford-Coulomb ductile fracture model with the domain of solid-to-shell equivalence model (HC-SDDE), was used in fracture simulations based on shell elements for the punching fracture experiments of unstiffened and stiffened panels. The flow stress and ductile fracture characteristics of JIS G3131 SPHC steel were identified through tension tests for flat bar, notched tension bar, central hole tension bar, plane strain tension bar, and pure shear bar specimens. Punching fracture tests for unstiffened and stiffened panels are conducted to validate the presented HC-DSSE model. The calibrated fracture model is implemented in a user-defined material subroutine. The force-indentation curves and final damage extents obtained from the simulations are compared with experimental results. The HC-DSSE fracture model provides reasonable estimations in terms of force-indentation paths and residual damage extents.
Abstract
Ductile fracture prediction is critical for the reasonable damage extent assessment of ships and offshore structures subjected to accidental loads, such as ship collisions and groundings. A fracture model combining the Hosford-Coulomb ductile fracture model with the domain of solid-to-shell equivalence model (HC-SDDE), was used in fracture simulations based on shell elements for the punching fracture experiments of unstiffened and stiffened panels. The flow stress and ductile fracture characteristics of JIS G3131 SPHC steel were identified through tension tests for flat bar, notched tension bar, central hole tension bar, plane strain tension bar, and pure shear bar specimens. Punching fracture tests for unstiffened and stiffened panels are conducted to validate the presented HC-DSSE model. The calibrated fracture model is implemented in a user-defined material subroutine. The force-indentation curves and final damage extents obtained from the simulations are compared with experimental results. The HC-DSSE fracture model provides reasonable estimations in terms of force-indentation paths and residual damage extents.
참고문헌 (26)
- Algarni, M., "A Unified Material Model for Multiaxial Ductile Fracture and Extremely Low Cycle Fatigue of Inconel 718", International Journal of Fatigue, 96, pp.162~177 (2017)[DOI]
- American Society for Testing and Materials(ASME), "Standard Test Methods of Tension Testing of Metallic Materials (ASTM E8)", American Society for Testing and Materials, ~ (2004)
- Bai, Y., "A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence", International Journal of Plasticity, 24(6), pp.1071~1096 (2008)[DOI]
- Bai, Y., "Application of Extended Mohr-Coulomb Citerion to Ductile Fracture", International Journal of Fracture, 161(1), pp.1~20 (2010)[DOI]
- Cerik, B. C., "On the prediction of ductile fracture in ship structures with shell elements at low temperatures", Thin-Walled Structures, 151, pp.106721~ (2020)[DOI]
- Cerik, B. C., "Simulation of Ship Collision and Grounding Damage Using Hosford-Coulomb Fracture Model for Shell Elements", Ocean Engineering, 173, pp.415~432 (2019)[DOI]
- Cerik, B. C., "Revisiting MARSTRUCT Benchmark Study on Side-shell Collision with a Combined Localized Necking and Stress-state Dependent Ductile Fracture Model", Ocean Engineering, 187, pp.106173~ (2019)[DOI]
- Cerik, B. C., "Modeling, Testing and Calibration of Ductile Crack Formation in Grade DH36 Ship Plates", Marine Structures, 66, pp.27~43 (2019)[DOI]
- 정준모, "Study on True Stress Correction from Tensile Tests", Journal of Mechanical Science and Technology, 22(6), pp.1039~1051 (2008), 대한기계학회
- 정준모, "극한지용 고장력강의 평균 응력 삼축비 및 평균 정규 로드 파라메터를 고려한 3차원 파단 변형률 평면 개발: 제1부 이론적 배경과 실험적 연구", 한국해양공학회지, 29(6), pp.445~453 (2015), 한국해양공학회
- 정준모, "극한지용 고장력강의 평균 응력 삼축비 및 평균 정규 로드 파라메터를 고려한 3차원 파단 변형률 평면 개발: 제2부 파단 변형률 평면의 정식화", 한국해양공학회지, 29(6), pp.454~462 (2015), 한국해양공학회
- 조상래, "횡충돌 하중을 받는 비보강 강판의 구조거동에 대한 크기 효과", 대한조선학회 논문집, 55(2), pp.178~186 (2018), 대한조선학회[DOI]
- Ehlers, S., "Simulating the collision response of ship side structures : A failure criteria benchmark study", International Shipbuilding Progress, 55(1), pp.127~144 (2008)[DOI]
- Johnson, G. R., "Fracture Characteristics of Three Metals Subjected to Various Strain, Strain Rates Temperatures and Pressures", Engineering Fracture Mechanics, 21(1), pp.31~48 (1985)[DOI]
- Mohr, D., "Micromechanically-motivated Phenomenological Hosford-coulomb Model for Predicting Ductile Fracture Initiation at Low Stress Triaxialites", International Journal of Solids and Structures, 67-68, pp.40~55 (2015)[DOI]
- 민덕기, "횡충격하중을 받는 빙해선박 구조물의 파단에 관한 연구", 대한조선학회 논문집, 49(4), pp.281~286 (2012), 대한조선학회[DOI]
- 노인식, "폭발강화격벽의 초기구조설계에 관한 연구 (제2보 : 커튼판 방식 폭발강화격벽의 설계식 개발)", 대한조선학회 논문집, 55(5), pp.379~384 (2018), 대한조선학회[DOI]
- Pack, K., "Combined Necking & Fracture Model to Predict Ductile Failure with Shell Finite Elements", Engineering Fracture Mechanics, 182, pp.32~51 (2017)[DOI]
- 박성주, "3차원 파단 변형률 평면을 이용한 비보강 원판의 펀칭 파단 시뮬레이션", 한국해양공학회지, 30(6), pp.474~483 (2016), 한국해양공학회
- 박성주, "선형 및 비선형 손상 발전 모델을 이용한 고장력강(EH36)의 연성 파단 예측", 한국해양공학회지, 31(4), pp.288~298 (2017), 한국해양공학회
- 박성주, "HC-DSSE 조합 파단 변형률 정식화에 기반한 선박해양 구조물용 강재의 연성 파단 예측", 대한조선학회 논문집, 56(1), pp.82~93 (2019), 대한조선학회[DOI]
- Park, S. J., "Ductile Fracture Prediction of EH36 Grade Steel Based on Hosford-Coulomb Model", Ships and Offshore Structures, 14, pp.68~78 (2019)[DOI]
- Park, S. J., "Comparative Study on Ductile Fracture Prediction of High-tensile Strength Marine Structural Steels", Ships and Offshore Structures (2020)[DOI]
- Ringsberg, J. W., "MARSTRUCT Benchmark Study on Nonlinear FE Simulation of an Experiment of an Indenter Impact with a Ship Side-shell Structure", Marine Structures, 59, pp.142~157 (2018)[DOI]
- Roth, C. C., "Ductile Fracture Experiments with Locally Proportional Loading Histories", International Journal of Plasticity, 79, pp.328~354 (2016)[DOI]
- Xue, L., "Damage Accumulation and Fracture Iinitiation in Uncracked Ductile Solids Subject to Triaxial Loading", International Journal of Solids and Structures, 44(16), pp.5163~5181 (2007)[DOI]