본문 바로가기
KERD
논문

실적선 통계분석을 이용한 32피트급 레저보트 선형개발

Hull Form Development of 32-ft Class Leisure Boat by Statistical Analysis of Actual Ships

1

조회

0

다운로드

10

인용

0

참고문헌

키워드

주제분류해양공학

초록

A 32-ft class leisure boat was newly developed using statistical analysis of actual ships. Resistance performances were investigated by testing models in a high-speed circulating water channel, and with the CFD method. The effects of a trim tab and of a fin attached at the hull side were studied together. Wave patterns were observed to clarify the relationship between resistance performance and wave characteristics. It was found that a trim tab and a side fin play a role in increasing resistance performance within a certain velocity range.

Abstract

A 32-ft class leisure boat was newly developed using statistical analysis of actual ships. Resistance performances were investigated by testing models in a high-speed circulating water channel, and with the CFD method. The effects of a trim tab and of a fin attached at the hull side were studied together. Wave patterns were observed to clarify the relationship between resistance performance and wave characteristics. It was found that a trim tab and a side fin play a role in increasing resistance performance within a certain velocity range.

참고문헌 (15)

  1. 김주남, "45노트급 고속정의 초기선형 개발과 저항성능에 관한 연구", 한국해양공학회지, 20(1), pp.32~36 (2006), 한국해양공학회
  2. 박제웅, "저중속 영역에서 6.67G", T급 연안어선의 저항특성에 관한 고찰, 2002, 89~93
  3. 박종헌, "세일링요트 개발을 위한 20세기초 전통 어선의 선형연구", 한국해양공학회지, 18(4), pp.71~76 (2004), 한국해양공학회
  4. 박충환, "활주형선의 Spray Strip 부착에 따른 저항특성 연구", 대한조선학회 춘계학술대회, pp.60~64 (2004)
  5. 반석호, "해양레저용 보급형 모터보트 설계에 관한 연구", 대한조선학회 추계학술대회, pp.115~118 (2002)
  6. 산업자원부, "전남 조선산업 클러스터 구축방안", ~ (2004)
  7. 서관희, "60M급 반활주 고속정의 선형설계와 부가물 부착에 따른 저항성능 고찰", 대한조선학회 추계학술대회, pp.869~875 (2005)
  8. 이장현, "소형 요트의 기본 구조 설계 및 구조 해석 기법에 대한 연구", 대한조선학회 논문집, 43(1), pp.791~802 (2006), 대한조선학회
  9. 정우철, "연안용 소형 고속 레저선 선형개발", 한국해양공학회지, 18(1), pp.80~84 (2004), 한국해양공학회
  10. 현범수, "요트 킬의 형상에 따른 유체력 및 유동특성 연구", 대한조선학회 논문집, 43(4), pp.414~421 (2006), 대한조선학회
  11. 해양수산부, "소형선박의 구조 및 설비 등에 관한 기준", ~ (2007)
  12. Clement,E.P., "The Plum Hulls", pp.82~95 (2004), Boat Builder
  13. Kihara,K., "A New Method of Initial Design for High Speed Craft(2)", Trans. of WJSNA, 72, pp.293~300 (1986)
  14. Niwa,S., "신고속정공학" (2002), 단정협회출판부
  15. Savitsky,D., "Planing Craft", Naval Engineers Journal, pp.8~15 (1985)

관련 논문AI추천

이 간행물의 다른 논문 (14건)