면내 충돌에 의한 유공 강판의 거동 해석
In-Plane Collision Analysis of Perforated Steel Plates
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In many cases, open-type plate breakwaters use plates with multiple holes; the holes serve as energy dissipaters and weight reducers. Because of the multi-holes configuration, stress concentration should be considered during the design process. Among several design loading conditions, the loads from a possible collision with a man-made vessel or other unexpected events may damage a multi-perforated steel plate. In that case, the structural behavior of a multi-perforated steel plate is quite significant, and is not well understood. This study presents a collision analysis for a multi-perforated steel plate. First, four different perforation topologies (three with circles and one with squares) were selected to investigate the effect of different hole shapes on the structural response. Second, the wave force at a specific site was calculated and loaded onto a steel plate as a static load. The static stresses were used for reference values. Third, two rigid body impacters (cubical & cylindrical) were applied to the steel plates to investigate the transient stress responses. In addition, two different impacting angles (45° & 90°) were selected to investigate the angle effect. From the collision analysis, the significance of the transient stresses was emphasized.
Abstract
In many cases, open-type plate breakwaters use plates with multiple holes; the holes serve as energy dissipaters and weight reducers. Because of the multi-holes configuration, stress concentration should be considered during the design process. Among several design loading conditions, the loads from a possible collision with a man-made vessel or other unexpected events may damage a multi-perforated steel plate. In that case, the structural behavior of a multi-perforated steel plate is quite significant, and is not well understood. This study presents a collision analysis for a multi-perforated steel plate. First, four different perforation topologies (three with circles and one with squares) were selected to investigate the effect of different hole shapes on the structural response. Second, the wave force at a specific site was calculated and loaded onto a steel plate as a static load. The static stresses were used for reference values. Third, two rigid body impacters (cubical & cylindrical) were applied to the steel plates to investigate the transient stress responses. In addition, two different impacting angles (45° & 90°) were selected to investigate the angle effect. From the collision analysis, the significance of the transient stresses was emphasized.
참고문헌 (18)
- 기성태, "3중유공판 방파제의 성능평가", 한국해양과학기술협의회 공동학술대회, pp.1853~1858 (2006)
- 김종성, "선박과 해양 구조물의 충돌 해석", 한국전산구조공학회 봄 학술발표회 논문집, 17(1), pp.169~176 (2004)
- 이성로, "교량의 선박충돌 에너지 산정", 대한토목학회 논문집A, 24(5A), pp.951~960 (2004), 대한토목학회
- 이탁기, "충돌 손상된 선체구조의 최종 종강도에 관한 실험적 연구", 한국해양공학회지, 22(2), pp.85~90 (2008), 한국해양공학회
- 차세대 해안공간 확보기술, 건설교통부주관, 1차년도 실적 및 계획보고서, "차세대 해안공간 연구단", 595~600 (2006)
- AASHTO, "AASHTO LRFD Bridge Design Specifications" (2004)
- "ANSYS User's Manual", ANSYS, Inc, ~ (1997)
- Chakrabarti, S.K., "Wave Interraction with an Upright Breakwater Structure", Ocean Engineering, 20, pp.1003~1021 (1999)
- Folias, E.S., "On the 3-dimensionl stress field around a circular holes in a plate of arbitrary thickness", Compute Mech, 6(3), pp.379~391 (1990)
- Cui, S., "Numerical analysis of dynamic buckling of rectangular plates subjected to intermediate-velocity impact", International Journal of Impact Engineering, 25, pp.147~167 (2001)
- Huang, W., "Finite Element Analysis on Collision Between Two Moving Elastic Bodies at Low Velocities", Computers & Structures, 57(3), pp.379~382 (1995)
- Petersen, M.J., "Dynamic of Ship Collision", Ocean Engineering, 9(4), pp.295~329 (1982)
- Petry, D., "Dynamic Buckling of Thin Isotropic Plates Subjected to In-plane Impact", Thin-Walled Structures, 38, pp.267~283 (2000)
- Savin, G.N., "Stress Concentration Around Holes" (1961), Pergamon Press
- She, C., "Numerical Investigations of Maximum Stress Concentration at Elliptic Holes in Finite Thickness Piezoelectric Plates", International Journal of Fatigue, 20, pp.438~445 (2006)
- Stepben, D.B., "Error Estimation for Plate Buckling Elements'", Computers & Slrucfwes, 61(4), pp.747~761 (1996)
- Yang, Z., "The Concentration of Stress and Strain in Finite Thickness Elastic Plate Containing a Circular Hole", International Journal of Solids and Structures, 45, pp.713~731 (2008)
- Wu, H.C., "On Stress Concentrations for Isotropic", Orthotropic Plates and Cylinders with a Circular Hole, 2003, pp.34, 127~134