보강판의 국부변형 손상과 잔류 강도의 실험연구
Experiments on the Denting Damage and Residual Strength of Stiffened Plates
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study reports a series of drop impact tests performed to generate denting damages on stiffened plates and their residual ultimate strength tests under axial compression. The models were fabricated of general structural steel, and each model has six longitudinal stiffeners and two transverse frames. Among six fabricated models, four were damaged, and two were left intact for reference. To investigate the effects of collision velocity and impact location on the extent of damage, the drop height and the impact location were changed in each impact test. After performing the collision tests, the ultimate axial compression tests were conducted to investigate the residual strengths of the damaged stiffened plates. Finite element analyses were also carried out using a commercial package Abaqus/Explicit. The material properties obtained from a quasi-static tensile tests were used, and the strain-rate sensitivity was considered. After importing the collision simulation results, the ultimate strength calculations were carried out and their results were compared with the test data for the validation of the finite element analysis method.
Abstract
This study reports a series of drop impact tests performed to generate denting damages on stiffened plates and their residual ultimate strength tests under axial compression. The models were fabricated of general structural steel, and each model has six longitudinal stiffeners and two transverse frames. Among six fabricated models, four were damaged, and two were left intact for reference. To investigate the effects of collision velocity and impact location on the extent of damage, the drop height and the impact location were changed in each impact test. After performing the collision tests, the ultimate axial compression tests were conducted to investigate the residual strengths of the damaged stiffened plates. Finite element analyses were also carried out using a commercial package Abaqus/Explicit. The material properties obtained from a quasi-static tensile tests were used, and the strain-rate sensitivity was considered. After importing the collision simulation results, the ultimate strength calculations were carried out and their results were compared with the test data for the validation of the finite element analysis method.
참고문헌 (20)
- Cerik, B. C., "Ultimate longitudinal compressive strength of steel plates with lateral patch load induced plastic deformation", Thin-Walled Structures, 122, pp.416~424 (2018)
- Cho, S. -R., "Dynamic material properties of marine steels under impacts loadings", Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics, ASEM15 (2015)
- Cho, S. -R., "Prediction of the damage extents of ship’s double hull side structures subjected to lateral collisions", 35th International Conference on Ocean, Offshore and Arctic Engineering (2016)
- 조상래, "횡충돌 하중을 받는 비보강 강판의 구조거동에 대한 크기 효과", 대한조선학회 논문집, 55(2), pp.178~186 (2018), 대한조선학회[DOI]
- Cho, S. -R., "Residual longitudinal strength of damaged box girder structures", 37th International Conference on Ocean, Offshore and Arctic Engineering (2018)
- Do, Q. T., "Predicting the collision damage of steel ring-stiffened cylinders and their residual strength under hydrostatic pressure", Ocean Engineering, 169, pp.326~343 (2018)
- Do, Q. T., "Dynamic lateral mass impact on steel stringer-stiffened cylinders", International Journal of Impact Engineering, 116, pp.105~126 (2018)
- Faulkner, D., "Ship structural design concepts", pp.633~712 (1975), Cornell Maritime Press
- "KS B 0801, The pieces for tension test for metallic material", Korean industrial standards, ~ (1962)
- Paik, J. K., "Ultimate strength of dented steel plates under edge shear loads", Thin-Walled Structures, 43(9), pp.1475~1492 (2005)
- Paik, J. K., "Ultimate strength of dented steel plates under axial compressive loads", International Journal of Mechanical Sciences, 45(3), pp.433~448 (2003)
- Saad-Eldeen, S., "Compressive strength assessment of rectangular steel plates with a local dent or an opening", Maritime Technology and Engineering - Proceedings of MARTECH 2014: 2nd International Conference on Maritime Technology and Engineering, 1(2008), pp.543~551 (2015)
- Saad-Eldeen, S., "Stress-strain analysis of dented rectangular plates subjected to uni-axial compressive loading", Engineering Structures, 99, pp.78~91 (2015)
- Saad-Eldeen, S., "Ultimate strength analysis of highly damaged plates", Marine Structures, 45, pp.63~85 (2016)
- Witkowska, M., "Collapse strength of stiffened panels with local dent damage", 27th international conference on offshore mechanics and Arctic engineering (2008)
- Witkowska, M., "Ultimate strength of locally damaged panels", Thin-Walled Structures, 97, pp.225~240 (2015)
- Xu, M. C., "Assessment of residual ultimate strength for wide dented stiffened panels subjected to compressive loads", Engineering Structures, 49, pp.316~328 (2013)
- Xu, M. C., "Effect of a central dent on the ultimate strength of narrow stiffened panels under axial compression", International Journal of Mechanical Sciences, 100, pp.68~79 (2015)
- Yamada, Y., "Model Test on the Ultimate Longitudinal Strength of a Damaged Box Girder", 5th International Conference on Marine Structures (2015)
- Yao, T., "Special Task Committee VI.2 Ultimate hull girder strength", Proceedings of 14th International Ship and Offshore Structures Congress (2000)